1. Introduction
The Freedconn FX PLUS is an advanced Bluetooth intercom headset designed for motorcycle riders, offering superior communication and audio experience. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance and user satisfaction.
2. Key Features
- Mesh Group Communication: Up to 1KM range.
- Intercom Population: Supports up to 16 riders. (Can be extended using FREE+ as host for >16 people).
- AI Noise Reduction: Intelligently identifies and eliminates noise for clear communication up to 120KM/H.
- High Fidelity Sound Quality: Professional-grade audio chip with Sony Hi-Res certified headset for surround sound.
- Signal Wall-Penetrating Technology: Ensures uninterrupted signal even with obstacles.
- Group Intercom Audio Mixing: Mixes intercom, music, and navigation audio.
- Dynamic Microphone: Automatically adjusts to speaking speed.
- 5 Independent Communication Channels.
- Music Sharing: Share music with other riders.
- Smartphone, MP3, GPS Connectivity: Supports connection with most smart devices.
- Cross-Brand Bluetooth Intercom Pairing: Compatible with other brand Bluetooth headsets.
- Voice Assistant Activation: One-click call to the mobile voice assistant.
- Fast Charger Support: Quick charging for extended use.
3. Packing List
Please check the contents of your package against the list below:
- Bluetooth host
- HiFi sound quality headphones
- Instruction manual
- 3M adhesive clip
- Buckle Clip
- Headphone ear tag Velcro
- Type-C data cable
4. Setup and Installation
4.1 Component Identification
Refer to Figure 3 for the location of the following components:
- Next song/volume up button
- Previous song/volume down button
- Water flow indicator
- On/off/(intercom) button
- Multi-function button
- Charging jack (Type-C)
- Pairing button
- Headphone jack
4.2 Helmet Installation
The FX PLUS is applicable to all types of helmets. Use either the 3M adhesive clip or the buckle clip to securely attach the Bluetooth host to your helmet. Ensure the unit is positioned for easy access to buttons and clear line of sight for indicators.
4.3 Headphone Installation
Attach the HiFi sound quality headphones inside your helmet using the provided headphone ear tag Velcro. Position them directly over your ears for optimal sound quality and comfort. Connect the headphones to the headphone jack on the Bluetooth host.
5. Operation
5.1 Power On/Off
- Power On: Press and hold the On/off button until the indicator lights up.
- Power Off: Press and hold the On/off button until the indicator turns off.
5.2 Bluetooth Pairing
To pair with your smartphone or other Bluetooth devices:
- Ensure the FX PLUS is powered on.
- Double-click the power button to enter pairing mode (indicator will flash).
- On your smartphone or device, search for "Freedconn FX PLUS" in the Bluetooth settings and select it to connect.
- Once connected, the indicator light will change, and you will hear a confirmation tone.
5.3 Cross-Brand Intercom Pairing
The FX PLUS supports pairing with other brands' Bluetooth headsets.
Steps for Cross-Brand Intercom:
- With the FX PLUS powered on, double-click the power button to enter pairing mode.
- Put the other brand's Bluetooth headset into its pairing mode (refer to its manual for specific instructions).
- The FX PLUS will automatically search and connect to the other headset. Once connected, the intercom function can begin.
5.4 Intercom Communication
- Initiate Intercom: After successful pairing, a short press of the intercom button will initiate communication.
- End Intercom: Another short press of the intercom button will end the communication.
- Group Intercom: For group communication, ensure all devices are paired. The FX PLUS supports Mesh Group Communication for up to 16 riders.
5.5 Music Playback
- Play/Pause: Short press the Multi-function button.
- Next Song: Short press the "Next song/volume up" button.
- Previous Song: Short press the "Previous song/volume down" button.
- Volume Up: Long press the "Next song/volume up" button.
- Volume Down: Long press the "Previous song/volume down" button.
- Music Sharing: The device supports sharing music with other connected headsets.
5.6 Phone Calls
- Answer Call: Short press the Multi-function button.
- End Call: Short press the Multi-function button.
- Reject Call: Long press the Multi-function button.
- Voice Assistant: One-click call to the mobile voice assistant (e.g., Siri).
6. Charging and Battery Life
The FX PLUS features a 1400mAh battery and supports fast charging via its Type-C interface.
- Charging: Connect the provided Type-C data cable to the charging jack and a suitable power source. The indicator light will show charging status.
- Battery Life:
- Standby time: 300 hours
- Phone call/Mesh intercom time: 9-10 hours
- Bluetooth Intercom talking time (between 2 devices): 16 hours
- Music time: 40 hours
7. Maintenance and Care
- Waterproof: The device has an IP67 waterproof grade, making it resistant to dust and water immersion up to 1 meter for 30 minutes. However, avoid prolonged exposure to water or extreme conditions.
- Cleaning: Use a soft, damp cloth to clean the unit. Do not use harsh chemicals or abrasive cleaners.
- Storage: Store the device in a cool, dry place when not in use. Avoid extreme temperatures.
- Charging: Always use the provided Type-C cable for charging to prevent damage.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on. | Low battery. | Charge the device using the Type-C cable. |
| Cannot pair with other devices. | Device not in pairing mode; distance too far; interference. | Ensure device is in pairing mode (double-click power button). Move closer to the other device. Reduce interference. |
| Intercom audio is unclear or noisy. | Environmental noise; microphone not positioned correctly. | The AI noise reduction should handle most noise. Ensure microphone is close to your mouth. Check for strong wind noise. |
| Short intercom distance. | Obstacles between devices; environmental factors. | Minimize obstacles. The device has signal wall-penetrating technology, but extreme obstacles can still affect range. |
9. Specifications
| Feature | Detail |
|---|---|
| Brand | Freedconn |
| Model Number | FX PLUS |
| Origin | Mainland China (Shenzhen, China) |
| Purpose | For outdoor sports |
| Condition | New |
| BT. Version | 5.1 |
| Battery Capacity | 1400mAh |
| Standby Time | 300 hours |
| Phone Call/Mesh Intercom Time | 9-10 hours |
| BT. Intercom Talking Time (2 devices) | 16 hours |
| Music Time | 40 hours |
| Frequency | 2.402GHz |
| Voltage | 3.7V |
| Charging Interface | TYPE-C |
| Waterproof Grade | IP67 |
| Size | 83mm x 45mm x 23mm |
| Design Style | New China-Chic |
10. User Tips
- For optimal sound clarity, ensure the headphones are positioned directly over your ears inside the helmet.
- When pairing with other brands, always put the FX PLUS into pairing mode first, then the other device.
- Regularly check the battery level, especially before long rides, to avoid interruptions.
- While the device is IP67 waterproof, it's best to avoid unnecessary exposure to heavy rain or submersion to prolong its lifespan.
11. Warranty and Support
The Freedconn FX PLUS comes with a 1-year warranty. For any technical support or warranty claims, please contact the seller or manufacturer directly. Ensure you retain your proof of purchase for warranty validation.
