Dreame AWH6-1000M

Dreame Multi-Surface Floor Cleaner AWH6-1000M Instruction Manual

Model: AWH6-1000M | Brand: Dreame

1. Introduction

The Dreame Multi-Surface Floor Cleaner AWH6-1000M is an original cleaning solution specifically formulated for use with Dreame wet/dry robot vacuum cleaners. This solution is designed to effectively clean various floor types, leaving them spotless and fresh. Please read this manual carefully before use to ensure proper application and safety.

Dreame Multi-Surface Floor Cleaner bottle, front and back labels
Image 1: Dreame Multi-Surface Floor Cleaner AWH6-1000M bottle showing front and back labels.

2. Safety Information

  • Keep out of reach of children and pets.
  • Do not ingest. If swallowed, seek medical advice immediately and show this container or label.
  • Avoid contact with eyes. If contact occurs, rinse thoroughly with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
  • Wash hands thoroughly after handling.
  • Store in a cool, dry place away from direct sunlight and extreme temperatures.
  • Do not mix with other cleaning agents or chemicals, as this may cause hazardous reactions.
  • Test on an inconspicuous area before use on delicate or new surfaces to ensure compatibility.

3. Setup and Dilution

The Dreame Multi-Surface Floor Cleaner is concentrated and must be diluted with water before use in your robot vacuum cleaner's clean water tank.

  1. Ensure your robot vacuum cleaner's clean water tank is empty and clean.
  2. Determine the desired cleaning intensity:
    • For daily cleaning: Add approximately 1/3 cap (about 10ml) of the cleaning solution to 1 liter of clean water.
    • For deep cleaning: Add approximately 2/3 cap (about 20ml) of the cleaning solution to 1 liter of clean water.
  3. Carefully pour the mixed solution into the clean water tank of your Dreame wet/dry robot vacuum cleaner. Do not overfill.
Front view of Dreame Multi-Surface Floor Cleaner bottle with dilution instructions on label
Image 2: Front label detailing dilution instructions.

4. Operating Instructions

Once the cleaning solution is properly diluted and added to the clean water tank:

  1. Close the clean water tank securely and reinsert it into your robot vacuum cleaner according to your vacuum's specific instructions.
  2. Start your Dreame wet/dry robot vacuum cleaner as you normally would for a wet cleaning cycle.
  3. The robot will automatically dispense the diluted cleaning solution as it mops and cleans your floors.
  4. After cleaning, empty and rinse the dirty water tank. Also, rinse the clean water tank if any solution remains, or if it will not be used for an extended period.

5. Maintenance and Storage

  • Keep the bottle tightly closed when not in use.
  • Store the cleaning solution in its original container in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Do not transfer the solution to unlabeled containers.
  • Ensure the cap is clean before closing to prevent contamination.

6. Troubleshooting

Common Issues:

  • Streaks on floor: Ensure proper dilution ratio. Too much solution can leave streaks. Also, check if the robot vacuum's mop pads are clean.
  • No cleaning solution dispensed: Verify that the clean water tank is correctly installed and filled with the diluted solution. Check your robot vacuum's manual for specific water tank issues.
  • Unpleasant odor: Ensure the dirty water tank is emptied and rinsed immediately after each use. Stagnant dirty water can cause odors.

7. Specifications

Feature Detail
Product Name Multi-Surface Floor Cleaner
Model Number AWH6-1000M
Brand Dreame
Volume 1 Liter (33.8 FL.OZ.)
Ingredients Water, Anionic Surfactant, Nonionic Surfactant, Preservative, Fragrance
Container Material ABS Plastic
Origin Mainland China
Package Dimensions (L x W x H) 14 cm x 7 cm x 26 cm
Package Weight 1.21 kg

8. User Tips

  • For best results, use fresh, clean water for dilution.
  • Regularly clean the brushes and filters of your robot vacuum to maintain optimal cleaning performance.
  • If you have very sensitive flooring, always perform a patch test in an inconspicuous area first.

9. Frequently Asked Questions (FAQ)

Q: Can I use this cleaner with any robot vacuum?
A: This cleaner is specifically formulated for Dreame wet/dry robot vacuum cleaners. Using it with other brands or types of vacuums may not yield optimal results or could potentially damage the device. Always refer to your vacuum cleaner's manual for compatible cleaning solutions.
Q: Is this solution safe for all floor types?
A: The Dreame Multi-Surface Floor Cleaner is designed for various floor types. However, it is always recommended to test on an inconspicuous area before use on delicate or new surfaces to ensure compatibility.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official Dreame website or contact Dreame customer service directly. Keep your purchase receipt as proof of purchase.

A digital version of the user manual (PDF) may be available for download on the official Dreame support page: View User Manual (PDF)

Related Documents - AWH6-1000M

Preview Dreame H15 Mix Wet and Dry Vacuum User Manual
Comprehensive user manual for the Dreame H15 Mix Wet and Dry Vacuum, detailing safety instructions, product features, installation, operation, maintenance, troubleshooting, and specifications.
Preview VMAI V8 Pro Multi-Surface Floor Cleaner User Manual
This user manual provides comprehensive instructions for the VMAI V8 Pro Multi-Surface Floor Cleaner, covering safety guidelines, product features, assembly, operation, maintenance, troubleshooting, and technical specifications.
Preview Dreame H12 Core Wet and Dry Vacuum Cleaner User Manual
Comprehensive user manual for the Dreame H12 Core wet and dry vacuum cleaner. This guide covers setup, operation, maintenance, troubleshooting, and technical specifications to ensure optimal cleaning performance.
Preview BISSELL CrossWave All-in-One Multi-Surface Cleaner User Manual
User manual for the BISSELL CrossWave All-in-One Multi-Surface Cleaner (Models 1785, 2210, 3238, 3395). Includes assembly, operation, cleaning, maintenance, and troubleshooting instructions.
Preview BISSELL CrossWave All-in-One Multi-Surface Cleaner User Guide
Comprehensive user guide for the BISSELL CrossWave All-in-One Multi-Surface Cleaner (models 1785, 2210, 3238, 3395, 3888). Includes safety instructions, assembly, operation, maintenance, and troubleshooting.
Preview BISSELL CrossWave Max Turbo 3642F User Manual and Guide
Comprehensive user guide for the BISSELL CrossWave Max Turbo 3642F All-in-One Multi-Surface Cleaner. Learn about assembly, charging, operation, maintenance, and troubleshooting.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.