Baseus Bass BS2 Lite True Wireless Earbuds User Manual

1. Introduction

Thank you for choosing the Baseus Bass BS2 Lite True Wireless Earbuds. These earbuds are designed to provide a high-quality audio experience with enhanced bass, comfortable fit, and reliable connectivity. This manual will guide you through the setup, operation, and maintenance of your new earbuds.

Key Features:

• 10mm Dynamic Drivers with SuperBass adaptive tuning for powerful audio.
• Featherlight semi-in-ear design (approx. 3.3g per earbud) for enhanced comfort.
• IP55 water and dust resistance, suitable for workouts and light rain.
• 2-Mic AI ENC technology for clear calls in noisy environments.
• Up to 7 hours playtime per charge, and 40 hours total with the charging case.
• Rapid 10-minute charge provides 1.5 hours of playtime.
• Seamless Bluetooth 6.0 for stable and fast connections.
• Multipoint connectivity (Baseus Smart-Connect) for switching between two devices.
• Intuitive touch controls.

2. What's in the Box

Ensure all items are present before initial use:

• Baseus Bass BS2 Lite True Wireless Earbuds
• Charging Case
• User Manual (this document)
• Charging Cable (USB-C)

3. Setup and First Use

3.1 Initial Charging

1. Place both earbuds into the charging case.
2. Connect the charging case to a power source using the provided USB-C cable.
3. The indicator light on the charging case will show charging status. A full charge takes approximately 2 hours.
4. Ensure the earbuds and case are fully charged before first use for optimal battery life.

3.2 Pairing with a Device

1. Open the charging case. The earbuds will automatically enter pairing mode.
2. On your device (smartphone, tablet, laptop), enable Bluetooth.
3. Search for "Baseus Bass BS2 Lite" in the list of available Bluetooth devices.
4. Select the earbuds to connect. You will hear a confirmation tone once connected.

3.3 Multipoint Connection (Baseus Smart-Connect)

The earbuds support connecting to two devices simultaneously. To use this feature:

1. Connect the earbuds to your first device as described above.
2. Disconnect Bluetooth on the first device.
3. Connect the earbuds to your second device.
4. Reconnect Bluetooth on the first device. The earbuds should now be connected to both devices, allowing seamless switching between them.

4. Operating Instructions

4.1 Touch Controls

The Baseus Bass BS2 Lite earbuds feature intuitive touch controls on the outer surface of each earbud. Refer to the diagram below for specific functions:

Music Mode:

• Play/Pause: Double tap (L or R earbud)
• Previous Track: Tap and hold for 1.5 seconds (L earbud)
• Next Track: Tap and hold for 1.5 seconds (R earbud)
• Activate Voice Assistant: Triple tap (L or R earbud)

Phone Calls:

• Answer/End Call: Double tap (L or R earbud)
• Reject Call: Tap and hold for 1.5 seconds (L or R earbud)

4.2 Wearing the Earbuds

The earbuds feature a semi-in-ear ergonomic design for a comfortable and secure fit. Insert the earbuds gently into your ears until they feel snug.

5. Maintenance and Care

To ensure the longevity and optimal performance of your Baseus Bass BS2 Lite earbuds, follow these care guidelines:

• Cleaning: Regularly clean the earbuds and charging case with a soft, dry, lint-free cloth. Do not use harsh chemicals or abrasive materials.
• Water Resistance: The earbuds are IP55 water and dust resistant, meaning they can withstand sweat and light splashes. Do not submerge them in water or expose them to heavy rain. Ensure they are dry before placing them back in the charging case.
• Storage: When not in use, store the earbuds in their charging case to protect them from dust and damage. Store in a cool, dry place away from extreme temperatures.
• Charging: Use only the provided USB-C cable or a certified equivalent for charging.

6. Troubleshooting

If you encounter issues with your earbuds, try the following solutions:

6.1 Pairing Issues

• Earbuds not pairing with device: Ensure Bluetooth is enabled on your device and the earbuds are in pairing mode (open the charging case). Try turning Bluetooth off and on again on your device.
• Only one earbud working: Place both earbuds back into the charging case, close the lid, wait a few seconds, then open it again. This often re-syncs them.
• Earbuds not appearing in Bluetooth list: Ensure the earbuds are charged. Try resetting the earbuds (refer to the full user manual if a specific reset procedure is available, otherwise, a factory reset usually involves holding a button on the case for several seconds).

6.2 Sound Issues

• No sound or low volume: Check the volume levels on both your device and the earbuds. Ensure the earbuds are properly seated in your ears.
• Poor call quality: Ensure the earbuds' microphones are not obstructed. The 2-Mic AI ENC technology helps, but clear placement is important.

6.3 Charging Issues

• Earbuds not charging: Ensure the charging contacts on both the earbuds and the case are clean and dry. Check the USB-C cable and power adapter for damage.
• Charging case not charging: Verify the USB-C cable and power source are working correctly.

7. Specifications

Product Dimensions:

• Charging Case: Approximately 50.2 mm (width) x 50.4 mm (height)
• Earbud: Approximately 17.9 mm (width) x 28.3 mm (height)

8. User Tips

• For the best call quality, ensure the earbuds are securely placed in your ears and the microphone areas are not covered. The 2-Mic AI ENC system is designed to enhance voice clarity by filtering background noise.
• If experiencing occasional disconnections with multipoint, try disconnecting from one device before connecting to the other, then re-establishing the second connection.

9. Warranty and Support

Baseus products are manufactured to the highest quality standards. For warranty information and customer support, please refer to the official Baseus website or contact your local distributor. Keep your purchase receipt as proof of purchase.

10. Video Guide

Watch this video for a visual overview of the Baseus Bass BS2 Lite True Wireless Earbuds' features and design: