1. Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your Motor Nuclear MNPQ-XH04 Chibi-Style Mobile Mecha Construction Kit. This highly detailed action figure model allows enthusiasts to build and display a unique anime-inspired robot. Please read this manual thoroughly before beginning assembly to ensure a smooth and enjoyable experience.
Figure 1: Fully assembled MNPQ-XH04 model.
2. Safety Information
- Recommended Age: This product is recommended for ages 14 years and older, with some components suitable for 18+. Adult supervision is advised for younger builders.
- Small Parts Warning: This kit contains small parts that may pose a choking hazard. Keep out of reach of small children.
- Chemical Warning: ⚠ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- Handling: Exercise caution when handling sharp tools (e.g., hobby knives, nippers) during assembly.
- Ventilation: If using paints, glues, or other modeling supplies, ensure adequate ventilation.
3. Package Contents
Your Motor Nuclear MNPQ-XH04 kit comes with all necessary parts for assembly. Please verify all components are present before starting. The package typically includes:
- Main Mecha Body Frame
- Multiple Armor Plates and Detail Parts
- Wing Assemblies (Red and Black)
- Assorted Weaponry (e.g., large sword, smaller blades)
- Effect Parts (e.g., blue energy effects)
- Display Stand with Storage Compartment
- Instruction Manual (this document)
Figure 2: Overview of included components.
4. Assembly Instructions (Setup)
The MNPQ-XH04 is an assembly model kit. Follow the detailed steps provided in the included pictorial instructions (not shown here, but typically included in the physical product box) for precise assembly. The general process involves:
- Preparation: Carefully remove parts from their runners using hobby nippers. Smooth any nubs with a hobby knife or sandpaper.
- Body Assembly: Assemble the core body, head, and limbs according to the diagrams. Pay attention to joint directions.
- Armor and Details: Attach the various armor pieces and detail parts to the main frame.
- Wing Assembly: Construct the intricate wing mechanisms and attach them to the back of the mecha.
- Weapons and Accessories: Assemble the sword, smaller blades, and any other accessories.
- Display Base: Assemble the display stand. Note that the stand features a storage compartment for smaller accessories.
For a visual guide to the assembly process, please refer to the official assembly video:
Video 1: Official assembly guide for the MNPQ-XH04 model.
Figure 3: The MNPQ-XH04 model in a dynamic pose, showcasing its wings and weaponry.
Figure 4: The MNPQ-XH04 model configured for flight, highlighting its articulated wings.
5. Operating Instructions
Once assembled, your MNPQ-XH04 model is ready for display and posing. This is an action figure model, designed for static display or dynamic posing, not for rough play.
- Posing: The model features articulated joints allowing for various poses. Handle joints gently to avoid breakage.
- Accessory Attachment: Weapons and effect parts can be attached to designated points on the figure. Refer to the assembly diagrams for proper placement.
- Display Stand: Use the included display stand to achieve aerial or dynamic ground poses. The stand provides stability and enhances display options.
Figure 5: The MNPQ-XH04 model showcasing its dynamic capabilities with effect parts.
6. Maintenance
- Cleaning: Dust the model regularly with a soft brush or compressed air. For stubborn dirt, gently wipe with a slightly damp cloth. Avoid harsh chemicals or abrasive materials.
- Storage: When not on display, store the model in a cool, dry place away from direct sunlight to prevent discoloration or material degradation. The display stand's base includes a storage compartment for small accessories.
- Joint Care: If joints become loose, a small amount of clear nail polish or hobby cement applied to the ball joint and allowed to dry can increase friction. If joints are too tight, carefully sand them down slightly.
Figure 6: Display stand with integrated storage for accessories.
7. Troubleshooting
- Missing Parts: If you find any parts missing upon opening the package, please contact customer support with your purchase details.
- Loose Joints: Refer to the "Joint Care" section under Maintenance for tips on tightening loose joints.
- Parts Not Fitting: Ensure you are using the correct parts for each step as per the assembly diagrams. Sometimes, a small amount of force or light sanding may be required for a snug fit.
- Breakage: If a part breaks during assembly or posing, hobby cement designed for PVC models can often be used for repair.
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | MNPQ-XH04 |
| Brand Name | Bandai (Motor Nuclear) |
| Item Type | Model, Action Figure |
| Material | PVC |
| Dimensions | Approximately 16 CM (Height) |
| Version Type | First Edition |
| Completion Degree | Finished Goods (after assembly) |
| By Animation Source | China Mainland |
| Certification | CE |
| Recommended Age | 14+ years, 18+ years |
| Package Weight | 1.2 kg |
| Package Dimensions | 20 cm (Length) x 20 cm (Width) x 15 cm (Height) |
9. User Tips
Based on general model kit building experience, here are some tips to enhance your building and display experience:
- Take Your Time: Rushing assembly can lead to mistakes or broken parts. Enjoy the process!
- Test Fit Parts: Before applying glue (if needed) or firmly snapping parts together, test fit them to ensure proper alignment.
- Panel Lining: For added detail, consider using a fine-tip marker or panel line accent color to highlight the engraved lines on the armor.
- Top Coat: Applying a matte or gloss top coat can protect the plastic and give the model a more finished look.
- Dynamic Posing: Experiment with different poses on the display stand to find the most impactful presentation for your mecha.
10. Warranty and Support
For any issues or inquiries regarding your Motor Nuclear MNPQ-XH04 model kit, please refer to the following information:
- Damaged or Missing Items: If your package arrives with damaged items or missing components, please contact the seller or platform customer service immediately.
- Returns: This product may be eligible for free returns within 90 days of receipt. Please check the specific return policy of your retailer.
- Delivery Guarantee: In cases of delayed delivery, lost packages, or items damaged during transit, compensation or refunds may be available. Refer to the platform's delivery guarantee policies for details.
- Contact: For further assistance, please contact the seller directly through the platform where you made your purchase.
