Introduction
The R11 wall-mounted boiler controller is designed to provide intelligent temperature management for your home heating system. It utilizes advanced algorithms to compare the ambient temperature with your desired settings, ensuring optimal comfort while enhancing energy efficiency. This manual provides detailed instructions for the installation, operation, and maintenance of your R11 Temperature Controller.
Features
- Smart Temperature Control: Advanced algorithms for optimal comfort and energy efficiency.
- Weekly Programming: Set and adjust daily schedules for each day of the week.
- Flexible Operation Modes: Easily switch between manual and automatic modes.
- Connectivity: Connects to a dedicated app for remote access and control.
- Precision Temperature Accuracy: Maintains consistent comfort with a temperature accuracy of ±1°C.
Setup and Installation
Package Contents
- 1 x R11 Temperature Controller
Installation Guidelines
The R11 Temperature Controller is designed for wall-mounted installation. Due to its connection to a boiler system, professional installation by a qualified technician is highly recommended to ensure safety and proper functionality. Ensure the power supply to the boiler system is turned off before beginning installation.
App Connectivity
- Download the dedicated control app from your smartphone's app store.
- Ensure your R11 controller is powered on and within range of your Wi-Fi network.
- Follow the in-app instructions to pair your device. The controller's display will show a “Pairing Icon” (refer to Operating section) during the pairing process.
Operating Instructions
Control Panel Overview
- Pairing Icon: Indicates the device is in pairing mode.
- WiFi Icon: Shows Wi-Fi connectivity status.
- Time: Displays current time.
- Room Temperature: Shows the current ambient temperature.
- Set Temperature: Displays the target temperature.
- Auto Mode: Indicates automatic scheduling is active.
- Manual Mode: Indicates manual temperature control is active.
- Time Period Icon: Relevant for weekly programming.
- Adjustment Keys (Up/Down): Used to increase or decrease temperature settings and navigate menus.
- Mode Key (M): Switches between different operating modes (e.g., Auto, Manual).
- ON/OFF Button: Powers the device on or off.
Setting Temperature
- Press the ON/OFF button to ensure the controller is active.
- Use the Up (∧) and Down (∨) adjustment keys to set your desired temperature. The “Set Temperature” display will update accordingly.
Switching Operation Modes
Press the Mode (M) key to cycle between available operation modes, typically Manual and Automatic (programmed schedule).
Weekly Programming
For detailed weekly programming, use the dedicated smartphone application. The app provides an intuitive interface to set daily schedules, including different temperature settings for various time periods throughout the week.
Maintenance
The R11 Temperature Controller requires minimal maintenance. To ensure optimal performance and longevity:
- Cleaning: Gently wipe the display and casing with a soft, dry cloth. Do not use abrasive cleaners, solvents, or spray directly onto the device.
- Avoid Obstructions: Ensure that the temperature sensor (if external) and the controller's vents are not obstructed by furniture, curtains, or other objects, as this can affect temperature readings.
Troubleshooting
If you encounter issues with your R11 Temperature Controller, try the following steps:
- No Power/Display Off: Check the power supply to the controller and the boiler. Ensure all connections are secure.
- Incorrect Temperature Reading: Verify that the controller's sensor is not obstructed and is located away from direct heat sources or drafts.
- No Boiler Response: Confirm that the controller is correctly wired to the boiler. If using wireless, check the connection between the controller and the boiler receiver (if applicable).
- App Connectivity Issues: Ensure your home Wi-Fi network is active and the controller is within range. Restart both the controller and your smartphone app.
- Temperature Not Changing: Check if the controller is in the correct operating mode (e.g., Manual mode for direct adjustments, Auto mode for programmed schedules).
If problems persist, contact customer support for further assistance.
Specifications
| Attribute | Specification |
|---|---|
| Product Name | Temperature Controller |
| Model | R11 |
| Material | ABS |
| Color | White |
| Temperature Accuracy | ±1°C |
| Origin | Mainland China |
| Certification | None |
User Tips
- For optimal energy savings, utilize the weekly programming feature to set lower temperatures during unoccupied hours or when you are asleep.
- Familiarize yourself with both manual and automatic modes to quickly adapt to unexpected changes in your heating needs.
- Regularly check the app for any firmware updates to ensure your controller has the latest features and performance improvements.
Warranty and Support
For warranty information, technical support, or any questions not covered in this manual, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.
