EPEVER XTRA2206N G3, XTRA2210N G3, XTRA3210N G3

Contents

EPEVER MPPT Solar Charge Controller XTRA G3 Series User Manual

Models: XTRA2206N G3, XTRA2210N G3, XTRA3210N G3

Waterproof and Dustproof Design

1. Introduction

This manual provides essential information for the installation, operation, and maintenance of your EPEVER XTRA G3 series MPPT solar charge controller. The XTRA G3 series controllers utilize advanced Maximum Power Point Tracking (MPPT) technology to maximize energy harvest from your solar panels, ensuring efficient charging for 12V or 24V battery systems. These controllers are designed with a robust, waterproof, and dustproof enclosure, making them suitable for various environments.

Please read this manual thoroughly before installation and use to ensure optimal performance and safety.

2. Safety Instructions

  • Ensure all wiring is correctly polarized and securely connected to prevent damage to the controller and other components.
  • Always connect the battery to the charge controller first, then the solar panel, and finally the load. Disconnect in the reverse order.
  • Do not disassemble or attempt to repair the controller yourself. Refer to qualified personnel for service.
  • Install the controller in a well-ventilated area, away from flammable materials and direct sunlight.
  • Wear appropriate personal protective equipment (PPE) during installation, including eye protection and insulated gloves.
  • Ensure the system voltage matches the controller's specifications (12V/24VDC auto-sensing).
  • The controller is certified with CE and RoHS standards, indicating compliance with health, safety, and environmental protection directives.

3. Package Contents

Upon unpacking, please verify that all items are present and undamaged:

  • EPEVER XTRA G3 Series MPPT Solar Charge Controller (Model: XTRA2206N G3, XTRA2210N G3, or XTRA3210N G3)
  • User Manual (this document)
  • Mounting accessories (screws, wall plugs)
EPEVER XTRA G3 Solar Charge Controller in its retail packaging
Figure 1: EPEVER XTRA G3 Solar Charge Controller in its retail packaging.

4. Product Overview

The EPEVER XTRA G3 series MPPT solar charge controllers are designed for high efficiency and reliability in off-grid solar systems. Key features include:

  • Advanced MPPT Technology: Tracking efficiency ≥99.5%, conversion efficiency up to 98.6%.
  • Nominal System Voltage: Automatic identification for 12V/24VDC systems.
  • Rated Charge Current: Available in 20A (XTRA2206N G3, XTRA2210N G3) and 30A (XTRA3210N G3) models.
  • 3-Stage Intelligent MPPT Charging: Bulk, Boost/Equalize, Float for optimized battery health.
  • Multiple Battery Types Supported: Compatible with Lead-acid (Sealed, Gel, Flooded) and Lithium batteries, with user-defined voltage parameters.
  • Built-in Bluetooth Module: For certain models, enabling parameter reading and modification via smartphone app.
  • RS485 Interface: Standard Modbus communication protocol with isolated RS485 for enhanced communication stability.
  • Response Energy Statistics Function: Monitor system performance via EPEVER APP or PC software.
  • Extensive Electronic Protection: Includes over-discharge, overload, short-circuit, and overheat protection.
  • IP32 Waterproof and Dustproof Design: Provides protection against solid objects over 2.5mm and sprays to 60° from the vertical.
Front view of EPEVER MPPT Solar Charge Controller XTRA2206N G3, showing LCD display and buttons.
Figure 2: Front view of the EPEVER XTRA G3 Solar Charge Controller, featuring LCD display and control buttons.
Diagram illustrating the built-in Bluetooth module feature and smartphone app connectivity.
Figure 3: Built-in Bluetooth module for certain models, enabling app connectivity.
Infographic detailing key features such as 3-stage intelligent MPPT charging, RS485 interface, energy statistics, multiple battery types, optional LCD, and extensive electronic protection.
Figure 4: Detailed features of the XTRA G3 series, including charging stages, communication, and protection.

5. Setup and Installation

5.1 Mounting the Controller

Choose a dry, well-ventilated location, protected from direct sunlight, high temperatures, and water. Ensure there is sufficient air circulation around the controller for heat dissipation. Mount the controller vertically on a wall or suitable surface using the provided mounting accessories. Leave adequate space (at least 150mm) above and below the controller for proper airflow.

5.2 Wiring Sequence

Follow the wiring sequence strictly to prevent damage to the controller and other components. The recommended wire sizes are 12AWG (4mm²) for 20A models (XTRA2206N G3) and 10AWG (6mm²) for 20A/30A models (XTRA2210N G3, XTRA3210N G3).

  1. Connect the Battery: Connect the battery to the controller's battery terminals (BATT+/-). Ensure correct polarity. The controller will detect the system voltage (12V/24V).
  2. Connect the Solar Panel: Connect the solar panel to the controller's PV terminals (PV+/-). Ensure correct polarity.
  3. Connect the Load: Connect the DC load to the controller's load terminals (LOAD+/-). Ensure correct polarity.

WARNING: Incorrect wiring polarity can cause permanent damage to the controller and other components. Always double-check connections before applying power.

System connection diagram for the solar charge controller, showing PV panel, battery, inverter, and AC load.
Figure 5: Basic system connection diagram, illustrating the flow from PV panel to controller, battery, and loads.
Diagram showing a typical home solar power system setup with the charge controller, inverter, and various loads.
Figure 6: Example of a home solar power system setup, including AC and DC loads.

6. Operating Instructions

6.1 LCD Display and Buttons

The controller features an LCD display to show system status and parameters, and buttons for navigation and settings adjustment.

  • PV+/-: Solar panel input terminals.
  • BATT+/-: Battery connection terminals.
  • LOAD+/-: DC load output terminals.
  • SET Button: Enter/confirm settings.
  • ESC Button: Exit menu/cancel operation.
  • Up/Down Buttons: Navigate through menus and adjust values.

6.2 Battery Type Selection

The controller supports various battery types. It is crucial to select the correct battery type in the settings to ensure proper charging and prolong battery life. Refer to the controller's menu for options like Sealed, Gel, Flooded, Lithium, and User-defined.

6.3 Load Control Modes

The controller offers multiple load work modes, such as manual control, light control, and time control. Configure the desired mode via the controller's menu or the EPEVER app.

6.4 Bluetooth App (for compatible models)

For models with a built-in Bluetooth module, download the EPEVER app on your smartphone to monitor system data, change parameters, and view energy statistics remotely. Follow the app's instructions for pairing and usage.

7. Maintenance

Regular maintenance ensures the longevity and optimal performance of your solar charge controller:

  • Check Connections: Periodically inspect all wiring connections for tightness and corrosion.
  • Clean Terminals: Ensure terminals are clean and free of dust or debris.
  • Ventilation: Keep the area around the controller clear of obstructions to allow for proper heat dissipation.
  • Environmental Check: Ensure the controller remains in a dry, well-ventilated environment within its specified operating temperature range.
  • Firmware Updates: Check the EPEVER website for any available firmware updates for your model.

8. Troubleshooting

If you encounter issues with your solar charge controller, refer to the following common problems and solutions:

Problem Possible Cause Solution
Controller display is off / No power Battery not connected or low voltage; reversed battery polarity; loose connection. Check battery connections and voltage. Ensure correct polarity. Tighten all connections.
Battery not charging Solar panel not connected or low voltage; reversed PV polarity; shading on solar panels; faulty solar panel. Check PV connections and voltage. Ensure correct polarity. Clear any shading. Test solar panel output.
Load not working Load disconnected; load overcurrent; load short circuit; load control mode settings. Check load connections. Reduce load or check for short circuits. Adjust load control mode settings.
Controller overheating Insufficient ventilation; excessive ambient temperature; overloaded system. Ensure adequate airflow around the controller. Relocate to a cooler area if possible. Reduce system load.

If the problem persists, contact EPEVER customer support for assistance.

9. Specifications

Detailed technical specifications for the EPEVER XTRA G3 series MPPT solar charge controllers:

Detailed technical specifications table for various XTRA G3 models, including electrical parameters, mechanical parameters, and environmental conditions.
Figure 7: Technical Specifications Table for EPEVER XTRA G3 Series.

Key specifications for XTRA2206N G3, XTRA2210N G3, XTRA3210N G3 models:

  • Nominal System Voltage: 12/24VDC Auto
  • Rated Charge Current: 20A (XTRA2206N G3, XTRA2210N G3), 30A (XTRA3210N G3)
  • Battery Voltage Range: 8-32V
  • Max. PV Open Circuit Voltage: 92V (at 25°C environment), 100V (at minimum operating environment temperature)
  • MPPT Voltage Range: (Battery voltage + 2V) ~ 72V
  • Max. Conversion Efficiency: Up to 98.6%
  • Max. MPPT Tracking Efficiency: ≥99.5%
  • Self-consumption: <15mA (12V), <12mA (24V)
  • Temperature Compensation: -3mV/°C/2V (Default)
  • Grounding Type: Common negative
  • RS485 Port: 5VDC/200mA (RJ45)
  • Enclosure: IP32
  • Work Temperature Range: -25°C to +50°C
  • Recommended Wire Size: 12AWG (4mm²) for XTRA2206N G3; 10AWG (6mm²) for XTRA2210N G3, XTRA3210N G3.

10. User Tips

  • For optimal performance, ensure your solar panel array's voltage is consistently above the battery voltage, especially during colder temperatures.
  • Utilize the Bluetooth connectivity (if available on your model) and the EPEVER app for convenient monitoring and parameter adjustments.
  • When connecting to an inverter, ensure the inverter's input voltage range is compatible with your battery bank's voltage.
  • Consider adding an external battery temperature sensor (if supported) for more accurate temperature compensation and improved battery charging.

11. Certifications and Support

11.1 Certifications

This product complies with the following standards:

  • CE: Conforms to European Union safety, health, and environmental protection requirements.
  • RoHS: Compliant with the Restriction of Hazardous Substances Directive.
  • IEC62109-1, EN61000-6-1, EN61000-6-3

11.2 Support Information

For technical support, warranty claims, or further inquiries, please contact EPEVER customer service or visit the official EPEVER website. Always provide your product model and serial number when seeking support.

© 2024 EPEVER. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.