Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of the Lichuan CNC Servos 750W 80mm 220V 3A 2.39N.m 3000RPM 17bit Absolute Value Servo Motor Driver With Brake Kit. This high-performance servo system is designed for precision control in various industrial automation applications.
1. Setup
1.1. Unboxing and Packing List
Carefully unpack all components and verify the contents against the packing list below:
Image: Contents of the Lichuan Servo Kit packaging, showing the drive, motor, cables, and accessories.
- Servo Drive Unit
- Servo Motor
- 3M Power Cable
- 3M Encoder Cable
- Drive Accessories (various screws and connectors)
1.2. Wiring Diagram
Refer to the following diagram for proper connection of the servo motor driver and peripheral equipment. Ensure all connections are secure before powering on the system.
Image: Detailed wiring diagram for the Lichuan LC10P servo motor driver. It shows connections for power supply (L, N), brake resistance (B1, B2, B3), motor power (U, V, W, PE), encoder wire, pulse signal I/O, and communication with HMI/PLC via 485 bus. Note: Enter the power supply Single-phase 220VAC. Encoders support 17/23-bit incremental/absolute encoder.
Note: To avoid damage to the motor or drive caused by collisions during transportation, please power on and test the machine before receiving the goods. After normal operation, install it onto the machine equipment.
1.3. Installation Precautions
- Do not forcefully strike the shaft from the installation/disassembly position to the end of the motor to prevent damaging the encoder at the other end.
- Minimize shaft seat vibration as much as possible to prevent damage to the bearings.
2. Operating Instructions
2.1. Basic Operation
The Lichuan servo system offers simple wiring and smooth operation. After connecting the motor and driver as per the wiring diagram, power on the system. The driver supports various control modes including Direction+pulse, analog voltage, and AB pulse.
For a visual guide on basic wiring and operation, please refer to the video below:
Video: Demonstration of simple wiring and smooth operation of the A5 Single Board Servo series, highlighting its competitive features.
2.2. Control Modes
The LC10P AC servo drive supports the following control modes:
- Direction + Pulse
- Analog Voltage
- AB Pulse
These modes allow for flexible integration into various control systems, including HMI and PLC, via the 485 bus.
3. Maintenance
To ensure the longevity and optimal performance of your Lichuan servo system, regular maintenance is recommended:
- Keep the servo motor and driver clean and free from dust and debris.
- Periodically check all wiring connections for tightness and signs of wear.
- Ensure adequate ventilation around the driver to prevent overheating.
- Avoid exposing the components to excessive moisture or corrosive environments.
4. Troubleshooting
If you encounter issues with your servo system, consider the following basic troubleshooting steps:
- No Power: Check the power supply connections and ensure the AC 220V input is correct.
- Motor Not Moving: Verify all motor and encoder cable connections. Check control signals from HMI/PLC.
- Abnormal Noise/Vibration: Inspect motor mounting for stability and ensure no mechanical obstructions. Review installation precautions regarding shaft vibration.
- Driver Error Codes: Consult the driver's display for any error codes and refer to the full product manual (if available) for specific code interpretations.
For complex issues, it is recommended to contact technical support.
5. Specifications
5.1. LC10P AC Servo Drive Specifications
Image: LC10P AC Servo Drive with labels for digital tube, key, control signal terminal, encoder terminal, power terminal, brake resistance terminal, motor power terminal, and ground terminal.
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Product weight | 0.84KG | Product dimensions | 161x47.5x169.5mm |
| Pulse width | More than 2.5 μs | Response frequency | Pulse MAX 200 kHz |
| Alarm output | Support | Power supply area | Single Phase 220VAC |
| Current range | 20A | Drive motor | AC servo motor (50 ~ 1000W) |
| Encoder wire | 17/23 line absolute encoder in | Control mode | Direction+pulse/analog voltage/AB pulse |
| Signal voltage | +5V/+24V | Communication rate | 1M BPS |
| CAN protocol | Support 485 bus, can support simultaneous mount up to 32 axis for motion control |
5.2. 80 Flanged Motor Specifications (Model 80M02430B)
Image: Specifications table and design pictures for 80 flanged motors, including model LCMT-07SLC1, LCMT-80M02430B, LCMT-10SLC1, LCMT-80M03230B, LCMT-10SLC1, LCMT-80M04025B. The table details rated power, voltage, current, speed, torque, peak torque, voltage constant, torque coefficient, inertia, resistance, inductance, electrical time, product weight, body length, and encoder type. Also includes dimension drawings for the 80 flanged motor.
| Parameter | Value (80M02430B) |
|---|---|
| Rated Power | 0.75 kW (750W) |
| Rated Voltage | 220 V |
| Rated Current | 4.5 A |
| Rated Speed | 3000 RPM |
| Rated Torque | 2.39 N.m |
| Peak Torque | 7.17 N.m |
| Voltage Constant | 32.8 V/1000RPM |
| Torque Coefficient | 0.53 N.m/A |
| Rated Inertia | 1.5 x 10-4 kg.m2 |
| Resistance | 2.2 Ω |
| Inductance | 4.2 mH |
| Electrical Time | 3.5 ms |
| Product Weight | 2.65 Kg |
| LA (Body Length) | 98 mm |
| LA (Body Length with Brake) | 133 mm |
| Encoder Line Number (PPR) | 17/23-bit incremental/17 bit absolute encoder |
| Motor Insulation Grade | CLASS F |
| Protection Level | IP65 |
5.3. General Specifications
- Brand Name: LICHUAN
- Origin: Mainland China
- Certification: CE
- Phase: Single-phase
- Protect Feature: Waterproof
- AC Voltage: 220V
- Efficiency: IE 2
- Frame: 80mm
- Product Name: single phase servo motor kit
- Rated voltage(V): 220
- Rated current (A): 3.0
- Holding torque (N.m): 2.39
- Rated speed(rpm): 3000
- Encoder line number(PPR): 17 bit Absolute Value
- Weight(Kg): 2.86
- Safety class: IP65
- Battery Included: No
- High-concerned chemical: None
6. Market Applications
The Lichuan CNC Servo system is suitable for a wide range of industrial applications requiring precise motion control:
Image: Diagram showing various market applications for the Lichuan servo system, including Automated machines, Laser machines, Robots, Packaging machines, 3D printers, CNC machines, Engraving machines, and Textile machines.
- Automated Machines
- Laser Machines
- Robots
- Packaging Machines
- 3D Printers
- CNC Machines
- Engraving Machines
- Textile Machines
7. User Tips
Based on user feedback, here are some tips for getting the most out of your Lichuan servo system:
- Users frequently praise the ease of use and straightforward setup of the system.
- The product is noted for its good quality and reliable performance in various applications.
8. Warranty and Support
The Lichuan servo motor and driver kit comes with a warranty period of 3 months to 1 year, depending on specific terms. For technical assistance, troubleshooting, or any inquiries, please contact our support team:
- WhatsApp: +86 15216425580
- Email: congandy02@163.com
