HOCO H86 Foldable Vacuum Adsorption Magnetic Car Phone Holder User Manual

1. Introduction

The HOCO H86 is a versatile vacuum adsorption magnetic holder designed for mobile phones. Featuring a strong N52 magnet and a foldable, multi-angle adjustable design, it provides a secure and convenient way to mount your device in various scenarios, from car dashboards to home surfaces. Its manual knob ensures accurate adsorption without the need for batteries.

2. Product Features

• Powerful N52 Magnets: High-quality round N52 powerful magnets ensure precise alignment and strong, stable adsorption.
• One-Hand Operation: Designed for instant attraction, making it convenient and easy to operate with one hand.
• Multi-Angle Adjustment: Double shaft design allows for 180-degree rotation at two points, meeting the needs of multi-angle use.
• Widely Compatible: Supports 4.5-7.0 inch mobile phones. Directly compatible with iPhone 12-17 series. Other mobile phones can be used with an included metal ring.
• Vacuum Adsorption: Features a manual knob for accurate vacuum adsorption, requiring no battery.
• Portable and Foldable: Compact design makes it easy to carry and store.
• Durable Construction: Made from ABS and zinc alloy with a sun drying pattern and oil spraying surface technology.

3. Package Contents

Please check the package for the following items:

• 1 x HOCO H86 Magnetic Phone Holder
• 1 x Metal Ring (for non-MagSafe compatible phones)

4. Specifications

5. Setup

1. Choose a Surface: Select a smooth, clean, and flat surface for mounting. This holder is suitable for car windshields, rearview mirrors, car displays, screens, tiles, treadmills, and other similar smooth planes.
2. Clean the Surface: Ensure the chosen surface is free from dust, dirt, and grease. Wipe it clean and let it dry completely.
3. Attach the Holder: Place the suction cup base of the HOCO H86 onto the prepared surface.
4. Secure the Suction Cup: Rotate the manual knob on the base clockwise to create a vacuum seal. Continue rotating until it is firmly adsorbed and locked in place. Refer to the 'LOCK' indicator on the base.
5. Prepare Your Phone (if necessary):
   • For iPhone 12-17 series: These phones have built-in MagSafe compatibility and can be directly attached to the magnetic head of the holder.
   • For other mobile phones (4.5-7.0 inches): Attach the provided metal ring to the back of your phone or phone case. Ensure it is centered for optimal magnetic connection.

6. Operating Instructions

1. Attach Your Phone: Once the holder is securely mounted, simply bring your phone (with or without the metal ring, depending on compatibility) close to the magnetic head. The powerful N52 magnets will instantly attract and hold your phone in place.
2. Adjust Viewing Angle: Utilize the double shaft design to adjust your phone to the desired viewing angle. The holder allows for 180-degree rotation at two points for maximum flexibility.
3. Remove Your Phone: Gently pull your phone away from the magnetic head.
4. Reposition/Remove Holder: To reposition or remove the holder, rotate the manual knob counter-clockwise to release the vacuum seal. Refer to the 'UNLOCK' indicator.

7. Maintenance

• Clean the Suction Cup: If the suction cup loses its grip, rinse it with warm water and let it air dry. Do not use abrasive cleaners or cloths.
• Clean the Magnetic Surface: Wipe the magnetic surface with a soft, dry cloth to remove any dust or debris that might affect magnetic adhesion.
• Avoid Extreme Temperatures: Do not expose the holder to extreme heat or cold for prolonged periods, as this may affect the material and suction performance.
• Storage: When not in use, store the holder in a cool, dry place. If storing for a long time, ensure the suction cup is clean and dry.

8. Troubleshooting

• Weak Suction:
  • Ensure the mounting surface is perfectly clean, smooth, and dry.
  • Make sure the manual knob is fully rotated to the 'LOCK' position.
  • If the suction cup is dirty, clean it as described in the Maintenance section.
• Phone Not Sticking Firmly:
  • Verify that your phone is MagSafe compatible (iPhone 12-17 series) or that the metal ring is correctly attached and centered on your phone/case.
  • Ensure there are no obstructions (e.g., thick phone cases, pop sockets) between the phone and the magnetic head.
  • Clean the magnetic surface of the holder and your phone/metal ring.
• Holder Feels Loose:
  • Check if the manual knob is fully tightened.
  • Ensure the adjustable joints are firm. If they become loose over time, gently tighten any visible screws if applicable (use caution).

9. User Tips

• For optimal magnetic hold, ensure the metal ring (if used) is placed directly on the back of your phone or a thin case, centered where the magnetic head will attach.
• Before long drives, especially on bumpy roads, double-check that the suction cup is securely locked and your phone is firmly attached.
• When removing the holder, always release the vacuum seal by rotating the knob to 'UNLOCK' to prevent damage to the mounting surface or the holder.
• Consider the angle of sunlight when mounting on a windshield to avoid glare on your phone screen.

10. Warranty and Support

HOCO products are manufactured to high-quality standards. For any issues or support inquiries, please contact your retailer or the HOCO customer service directly. Please retain your proof of purchase for warranty claims.