1. Introduction
The FLYSKY FS-i6X transmitter and its compatible receivers (FS-iA6B or FS-IA10B) form a sophisticated 6 to 10 channel 2.4GHz AFHDS 2A digital proportional computerized RC system. This system is engineered to provide superior protection against interference, ensuring reliable control with low power consumption and high receiver sensitivity. It is specifically designed for a wide range of radio control models, including fixed-wing aircraft, gliders, helicopters, and FPV racing drones.
This manual provides essential information for the safe and effective operation of your FS-i6X system. Please read it thoroughly before use.
2. Key Features
- AFHDS 2A Technology: Utilizes Automatic Frequency Hopping Digital System Second Generation for robust interference protection, low power consumption, and high receiver sensitivity.
- Telemetry Support: Capable of receiving data from various sensors (temperature, altitude, etc.) and supports i-BUS for advanced configurations.
- Multi-channel Hopping: Hops between 16 channels (32 for Japanese and Korean versions) to minimize interference.
- Unique ID Recognition: Each transmitter and receiver pair has a unique ID to prevent cross-interference.
- Low Power Consumption: Significantly extends battery life compared to standard FM systems.
- Expandable Channels: Default 6 channels, expandable to 10 channels.
- Firmware Upgradable: Allows for future enhancements and channel expansion.
- Dot Matrix Backlit LCD Screen: Provides clear display of operational data.
3. Package Contents
Depending on your purchase, the package may include:
- 1 x FS-i6X Remote Controller (Transmitter)
- 1 x FS-iA6B Receiver (if selected)
- 1 x FS-IA10B Receiver (if selected)
- 1 x Bind Plug
- 1 x User Manual (this document)
Note: 4 x AA batteries for the transmitter are not included and must be purchased separately.
4. Product Overview and Setup
4.1 Transmitter Components (FS-i6X)
Refer to Figure 1 for the location of the following components:
- Antenna: Dual antenna system for stable signal transmission.
- Handle: For comfortable grip.
- VRA, VRB: Rotary potentiometers (knobs) for proportional control.
- Switch A, B, C, D: Toggle switches for various functions.
- Hook: Attachment point for a neck strap.
- Left Joystick: Controls throttle (Mode 2) and rudder.
- Right Joystick: Controls aileron and elevator.
- Fine-tuning rod 1, 2, 3, 4: Trim levers for precise adjustments.
- UP, DOWN: Navigation buttons for menu.
- OK: Confirmation button.
- Cancel: Back/cancel button.
- Bind Key: Button used for binding the transmitter to a receiver.
- Power: Power button for the transmitter.
- LCD Screen: Dot matrix backlit LCD (128*64 lattice, VA 73*39mm) for displaying system information.
4.2 Receiver Overview (FS-iA6B / FS-IA10B)
Both receivers feature dual antennas for enhanced signal stability and range. They include standard servo ports, an i-BUS port, and a data acquisition port for telemetry functions.
4.3 Battery Installation (Transmitter)
- Locate the battery compartment on the back of the transmitter (refer to Figure 3).
- Slide open the battery cover.
- Insert four (4) AA batteries, ensuring correct polarity (+/-).
- Close the battery cover securely.
The transmitter requires 4 AA batteries (not included). A low voltage warning will activate if the battery voltage drops below 4.2V.
4.4 Binding the Transmitter and Receiver
Binding is the process of linking the transmitter to a specific receiver. This must be done before first use and if you replace either the transmitter or receiver.
- Ensure the transmitter is powered off.
- Connect the bind plug to the B/VCC port on the receiver.
- Connect power to the receiver (e.g., from an ESC or external battery). The receiver's LED should flash rapidly.
- Press and hold the 'Bind Key' on the transmitter (refer to Figure 1) while powering on the transmitter.
- The transmitter's LCD screen will display 'Binding...'.
- Once binding is successful, the receiver's LED will stop flashing and remain solid. Release the 'Bind Key'.
- Power off both the transmitter and receiver.
- Remove the bind plug from the receiver.
- Power on the transmitter first, then the receiver. The receiver's LED should be solid, indicating a successful connection.
Always power on the transmitter before the receiver and power off the receiver before the transmitter to prevent unintended model operation.
5. Operating Instructions
5.1 Basic Operation
- Power On: Press the 'Power' button on the transmitter.
- Power Off: Press and hold the 'Power' button until the transmitter shuts down.
- Joystick Control (Mode 2):
- Left Joystick: Vertical movement controls throttle, horizontal movement controls rudder.
- Right Joystick: Vertical movement controls elevator, horizontal movement controls aileron.
- Trims: Use the fine-tuning rods (trims) to make small adjustments to the control surfaces to achieve stable flight.
- Switches and Knobs: Assign functions to the switches (A, B, C, D) and rotary knobs (VRA, VRB) via the transmitter's menu system for auxiliary controls (e.g., landing gear, flaps, camera tilt).
5.2 Menu Navigation
The FS-i6X features a Dot Matrix Backlit LCD Screen for accessing and configuring various settings. Use the 'UP', 'DOWN', 'OK', and 'Cancel' buttons (refer to Figure 4) to navigate the menu:
- UP/DOWN: Scroll through menu options.
- OK: Enter a menu or confirm a selection.
- Cancel: Go back to the previous menu or cancel an action.
Detailed menu options and their functions are typically covered in the full digital manual available from the manufacturer's website.
5.3 Model Type Selection
The FS-i6X supports different model types. Ensure you select the correct model type (Fixed-Wing, Glider, or Helicopter) in the transmitter's settings to ensure proper control mixing and functionality.
5.4 Firmware Updates
The FS-i6X supports online firmware updates. Check the manufacturer's website periodically for new firmware versions that may offer improved features or bug fixes. Follow the instructions provided with the firmware update package carefully.
6. Maintenance
- Cleaning: Wipe the transmitter and receiver with a soft, dry cloth. Do not use solvents or abrasive cleaners.
- Storage: Store the system in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries from the transmitter if storing for extended periods to prevent leakage.
- Battery Care: Use only recommended AA batteries. Replace all batteries at the same time. Do not mix old and new batteries or different types of batteries.
- Antenna Care: Ensure the antennas on both the transmitter and receiver are not bent or damaged. Damaged antennas can significantly reduce range and signal quality.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Transmitter does not power on. | Dead or incorrectly installed batteries. | Check battery polarity. Replace with fresh AA batteries. |
| Receiver LED not solid after powering on. | Not bound to transmitter, or out of range. | Perform the binding procedure again. Ensure transmitter is powered on and within range. |
| Loss of control/signal during operation. | Interference, low transmitter/receiver battery, or excessive range. | Check battery levels. Operate within recommended range. Avoid areas with high RF interference. Check for damaged antennas. |
| Controls are reversed or incorrect. | Incorrect model type selected or servo reverse settings. | Verify the correct model type is selected in the transmitter menu. Adjust servo reverse settings as needed. |
| Telemetry data not displayed. | Sensors not connected or configured. | Ensure external sensors are correctly connected to the receiver and configured in the transmitter menu. |
8. Specifications
8.1 FS-i6X Transmitter Specifications
| Feature | Specification |
|---|---|
| Channels | 6-10 (default 6) |
| Model Type | Fixed-Wing/Glider/Helicopter |
| RF Range | 2.408-2.475GHz |
| RF Power | <20dBm |
| RF Channel | 135 |
| Bandwidth | 500KHz |
| 2.4GHz System | AFHDS 2A / AFHDS |
| Modulation Type | GFSK |
| Stick Resolution | 4096 |
| Low Voltage Warning | <4.2V |
| DSC Port | PS/2 Port |
| Chargeable | No |
| Antenna Length | 26mm (Dual Antenna) |
| Weight | Approx. 400g |
| Power | 4 * AA battery (not included) |
| Display | STN transflective LCD 128*64 lattice, VA 73*39mm, with white backlight |
| Size | 190 * 174 * 89mm |
| On-Line Update | Yes |
| Color | Black |
| Certificate | CE0678, FCC ID: N4ZFLYSKYI6X |
8.2 FS-iA6B Receiver Specifications
| Feature | Specification |
|---|---|
| Channels | 6 |
| Model Type | Airplane/Glider/Helicopter |
| RF Range | 2.4055-2.475GHz |
| RF Channel | 140 |
| RF Receiver Sensitivity | -105dBm |
| Bandwidth | 500KHz |
| 2.4GHz System | AFHDS 2A |
| Modulation Type | GFSK |
| Power | 4.0-6.5V DC |
| Compatible Transmitter | FS-i6X, FS-i4, FS-i6, FS-i10, FS-GT2E, FS-GT2G |
| Antenna Length | 26mm (Dual Antenna) |
| Weight | 16.3g |
| Size | 47 * 26.2 * 15mm |
| i-BUS Port | Yes |
| Data Acquisition Port | Yes |
8.3 FS-IA10B Receiver Specifications
| Feature | Specification |
|---|---|
| Number of Channels | 10 |
| Suitable Models | Airplane / Glider / Helicopter |
| Frequency Range | 2.4-2.48 GHz |
| Number of Newspapers | 160 |
| Transmitting Power | Not more than 20dBm |
| Receiver Sensitivity | -105dBm |
| 2.4G Modes | Automatic Frequency Second Generation Digital System |
| Encoding | GFSK |
| Antenna Length | 26 mm * 2 (dual antenna) |
| Weight | 19.3 g |
| Input Power | 4.0-6.5 V DC |
| Dimensions | 47 * 33.1 * 14.7 mm |
| Color | Black |
| Certification | CE0678, FCC |
| i-BUS Interface | Yes |
| Data Acquisition Interface | Yes |
9. User Tips
- Range Testing: Always perform a range test before flying a new model or in a new environment to ensure a stable connection.
- Fail-Safe Setup: Configure fail-safe settings on your receiver to ensure your model reacts predictably (e.g., throttle to idle) in case of signal loss.
- Regular Checks: Before each flight, check all control surfaces for correct movement and direction relative to joystick inputs.
- Battery Management: Keep track of your transmitter and model battery levels. Never fly with low batteries.
10. Warranty and Support
For warranty information, technical support, and access to the latest firmware updates or detailed digital manuals, please visit the official FLYSKY website or contact your retailer. Keep your proof of purchase for any warranty claims.
11. Statement of Compliance
Disclaimer
⚠️ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.