Flysky INR8-8D

Contents

Flysky INR8-8D 8-Channel Receiver and FS-iBTA01 Telemetry Adapter Instruction Manual

Model: INR8-8D

Brand: Flysky

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Flysky INR8-8D 8-channel receiver and the optional FS-iBTA01 I-BUS2 Telemetry Adapter. The INR8-8D is a multi-functional 2.4G receiver designed for RC car applications, featuring AFHDS3 protocol, telemetry capabilities, and multiple data output options. The FS-iBTA01 adapter enhances functionality by integrating ESC and receiver data for comprehensive monitoring.

2. Safety Information

  • Always operate your RC vehicle in a safe and responsible manner.
  • Ensure all connections are secure before operation to prevent signal loss or malfunction.
  • Keep the receiver and adapter away from moisture, extreme temperatures, and strong electromagnetic fields.
  • Do not attempt to modify the receiver or adapter, as this may void the warranty and cause unsafe operation.
  • Recommended age for use: 14+ years.

3. Package Contents

  • Flysky INR8-8D 8-Channel Receiver
  • Optional: Flysky FS-iBTA01 I-BUS2 Telemetry Adapter
  • Instruction Manual (this document)
  • Stickers (may be included)
Flysky INR8-8D receiver and accessories including stickers and manual.
Flysky INR8-8D receiver and included accessories.

4. Product Overview

4.1. INR8-8D Receiver

Flysky INR8-8D 8-channel receiver top view showing ports and labels.
Top view of the INR8-8D receiver.
Flysky INR8-8D receiver bottom view with 'Made in China' label.
Bottom view of the INR8-8D receiver.
Detailed diagram of Flysky INR8-8D receiver ports, including LED1, LED2, CH1-CH8, BVD, VCC, NPP/5, NPP/6, MODE, and BIND buttons.
INR8-8D Receiver Port Layout

The INR8-8D receiver features:

  • LED1, LED2: Status indicators.
  • CH1-CH8: PWM output channels.
  • BVD: Battery Voltage Detection port.
  • VCC: Power input.
  • NPP/5, NPP/6: Newport function ports, also serving as CH5 and CH6.
  • MODE Button: For configuration.
  • BIND Button: For binding with the transmitter.

4.2. FS-iBTA01 Telemetry Adapter

Flysky FS-iBTA01 I-BUS2 Telemetry Adapter.
FS-iBTA01 I-BUS2 Telemetry Adapter.

The FS-iBTA01 is an I-BUS2 Telemetry Adapter designed to work with i-BUS2 protocol series receivers. It allows for real-time data logging and display of various parameters from compatible ESCs (e.g., Hobbywing XR8 Pro, XR10 PRO, MAX10 G2, Platinum V4 60A, 80A, 120A, PlatinumV5260A, etc.). It includes an LED indicator and supports 512M-8G memory cards for data storage.

5. Specifications

5.1. INR8-8D Receiver

FeatureSpecification
Product ModelINR8-8D
Compatible ModelVehicle (RC Cars)
PWM Channels8
Transmission Power<20dBm
Wireless Frequency2.4GHz ISM
Wireless ProtocolAFHDS3
Channel Resolution4096 Levels
Remote Control Distance>300m (open area, no interference, ground distance)
Antenna TypeSingle antenna
Operating Voltage3.5~9V/DC
Data OutputPWM/PPM/I-BUS2/S.BUS/I-BUS
Temperature Range-10°C ~ +60°C
Humidity Range20%~95%
Firmware UpdateSupported
Dimensions41 x 28.3 x 13.3 mm
Weight12.2g
ColorBlack
CertificationsCE, FCCID: 2A2UNINR8D0
Specifications table for Flysky INR8-8D receiver, including dimensions, weight, and certifications.
INR8-8D Basic Parameters.

5.2. FS-iBTA01 Telemetry Adapter

FeatureSpecification
Product NameFS-iBTA01
Compatible ReceiversSupports i-BUS2 protocol series receivers
Compatible DevicesHobbywing ESCs with programming interface (e.g., XR8Pro, XR10 PRO, MAX10 G2, Platinum V4 60A, 80A, 120A, PlatinumV5260A etc.)
Protocol Typei-BUS2
Supported Memory Card512M~8G
Operating Voltage3.5-9V/DC
Dimensions28 x 15 x 6 mm
Weight6.8g
Temperature Range-10°C ~ +60°C
Humidity Range20% to 95%
Firmware UpdateSupported
Specifications table for Flysky FS-iBTA01 Telemetry Adapter, including dimensions, weight, and compatible devices.
FS-iBTA01 Basic Parameters.

6. Setup

6.1. Firmware Update Requirements

Before using the INR8-8D receiver, ensure your Flysky transmitter is updated to the latest firmware version:

  • NB4 users: Upgrade to firmware version 2.0.116 or later.
  • NB4+ users: Upgrade to firmware version 1.0.17 or later.
  • NB4 Pro users: Upgrade to firmware version 1.0.17 or later.
  • NB4 Pro+ users: Await the new firmware release (expected September/October) and upgrade before use.
Flysky INR8-8D receiver in clear packaging, displaying FCC ID and firmware update requirements for NB4 series transmitters.
Firmware update notice on product packaging.

6.2. Binding the Receiver

Refer to your Flysky transmitter's manual for specific binding procedures. Generally, the process involves:

  1. Power on the transmitter in binding mode.
  2. Connect power to the INR8-8D receiver while holding the BIND button.
  3. The receiver's LED should indicate successful binding (refer to receiver LED status for details).
  4. Release the BIND button and power cycle both the transmitter and receiver.

6.3. Connecting the FS-iBTA01 Telemetry Adapter

The FS-iBTA01 adapter offers a plug-and-play solution for telemetry data. Follow these steps:

  1. Port1 Connection: Connect Port1 of the FS-iBTA01 adapter to a Newport port (e.g., NPP/5 or NPP/6) on the INR8-8D receiver.
  2. Port2 Connection: Connect Port2 of the FS-iBTA01 adapter to the programming port of your compatible ESC (e.g., GoodWe ESC programming port).
  3. Ensure the Newport interface protocol on your receiver is set to i-BUS2.
Wiring diagram showing connection of FS-iBTA01 Telemetry Adapter to receiver and ESC programming interface.
Connection diagram for FS-iBTA01 Telemetry Adapter.

7. Operating Instructions

7.1. Data Tracking and Black Box Function

The INR8-8D receiver, especially when paired with the FS-iBTA01 adapter, supports advanced data tracking:

  • Control Data (BC file): The system automatically records channel control data, capturing 20 records per second for control commands. This facilitates precise analysis of control responses.
  • Device Feedback Data (BD file): Real-time capture of ESC parameters is supported, allowing for in-depth performance curve analysis using third-party tools. This includes data such as voltage, current, temperature, motor temperature, power, consumption, run time, and throttle.
Table showing BC file data records for connection status and channel pulse widths (CH1-CH4, CH5-CH32).
Example of BC file data records.
Table showing BD file data records for voltage, current, temperature, motor temperature, power, consumption, run time, and throttle.
Example of BD file data records.

7.2. Multi-Data Fusion and Global Control

The iBTA01 adapter integrates data from the ESC, receiver, and other multi-source sensors. This allows for real-time viewing of over 10 key data model statuses, including voltage, current, speed, and temperature, directly on your compatible remote control. This comprehensive data display ensures safer and more informed operation.

7.3. Smart Storage and Data Transfer

The FS-iBTA01 adapter features smart storage with an SD card slot (compatible with 512M-8G memory cards). When the memory card is full, old data is automatically overwritten, eliminating the need for manual cleanup. Data can be directly read by a PC via a USB Type-C connection, without needing to remove the card.

Diagram illustrating SD card insertion into FS-iBTA01 and connection via USB Type-C to a PC for data transfer.
Data transfer via USB Type-C.

8. Maintenance

  • Regularly inspect all wiring for signs of wear or damage.
  • Keep the receiver and adapter clean and free from dust and debris.
  • Store the components in a dry, cool environment when not in use.
  • Ensure firmware is up-to-date for optimal performance and compatibility.

9. Troubleshooting

  • No signal/Loss of control: Re-bind the receiver to the transmitter. Check all power connections. Ensure the transmitter's firmware is updated.
  • Telemetry data not displayed: Verify the FS-iBTA01 is correctly connected to both the receiver's Newport port and the ESC's programming port. Confirm the receiver's Newport protocol is set to i-BUS2. Ensure the ESC is compatible and functioning correctly.
  • Data logging issues: Check if an SD card is inserted and properly formatted. Ensure the SD card is within the supported size range (512M-8G).
  • Interference: Operate the RC vehicle in an open area, away from other 2.4GHz devices or large metal objects that could cause signal interference.

10. User Tips

  • Always perform a range check before operating your RC vehicle, especially after any changes to the receiver or transmitter setup.
  • When installing the receiver, try to position the antenna away from carbon fiber or metal parts of the chassis to maximize signal reception.
  • Utilize the data logging feature to analyze your vehicle's performance and fine-tune settings for different driving conditions.

11. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your proof of purchase for any warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.