MicroZone C7 MINI Plus 2.4G Remote Controller and MC210R Receiver Instruction Manual

1. Introduction

The MicroZone C7 MINI Plus is a versatile 2.4G 10-channel industrial remote controller designed for a wide range of remote-controlled applications. Paired with the MC210R receiver, it offers reliable control and enhanced anti-interference performance for various vehicles and machinery.

This manual provides essential information for setting up, operating, and maintaining your C7 MINI Plus remote control system.

Applications

The C7 MINI Plus is suitable for controlling a variety of equipment, including but not limited to:

• Lawn mowers
• Tracked carriers
• Crop sprayers
• Photovoltaic cleaning robots
• Intelligent robots
• Transport vehicles
• Tracked chassis
• Remote controlled agricultural machinery
• RC cars, boats, planes, and drones

2. Setup

2.1 Charging the Controller

The C7 MINI Plus controller features a built-in battery for long endurance. To charge the controller:

1. Locate the Type-C charging port on the controller.
2. Connect a standard Type-C USB cable to the port.
3. Connect the other end of the cable to a suitable USB power source (e.g., computer, USB wall adapter).
4. The controller's display will indicate charging status.

2.2 Receiver Connection (MC210R)

The MC210R receiver provides 10 PWM signal outputs. Connect the receiver to your model's components (servos, ESCs, etc.) according to the wiring diagram below. Ensure correct polarity for power connections (Positive, Negative, Signal).

2.3 Pairing the Controller and Receiver

The MC210R receiver uses a button pairing method. Refer to the receiver's specific instructions for detailed pairing steps. Generally, this involves:

1. Power on the receiver while holding its bind button (or press the bind button immediately after powering on).
2. The receiver's LED will indicate it is in binding mode.
3. Power on the C7 MINI Plus controller and activate its binding function (refer to the controller's display settings for 'Wireless power' or 'Binding').
4. Once successfully paired, the receiver's LED will change to a solid state, and the controller's display will show a stable connection.

3. Operating Instructions

3.1 Controller Overview

The C7 MINI Plus features an ergonomic handle and a color screen backlight display for real-time status and parameter adjustments. Key controls include joysticks, a throttle knob, and various switches.

3.2 Emergency Stop Function

The controller is equipped with a prominent red emergency stop button for immediate braking in critical situations.

1. **To activate emergency braking**: Press the red emergency stop switch. The remote controller and the connected device will pause operation. The screen will flash, and a beeping sound will be emitted.
2. **To release the emergency brake**: Rotate the emergency stop switch to the right.

3.3 Display and Settings

The color screen provides access to various settings and real-time information. Navigate through the menus using the controller's buttons and joysticks.

Key Settings and Functions:

• **Vehicle Settings**: Configure parameters specific to your vehicle or machinery.
• **System Settings**: Adjust general controller settings.
• **Timer Settings**: Records working duration, supports count-up and countdown modes.
• **Joystick Mode**: Adjusts the control functions of the four joysticks based on usage needs. Preset modes are available.
• **Travel Adjustment**: Limits the control surface's movement range to ensure operation within desired parameters.
• **Mixing Settings**: Binds two receiver channels together to operate in sync via a single transmitter channel.
• **Light Settings**: Control connected lights.
• **Sensor Settings**: Configure connected sensors.
• **On-board Voltage**: Monitor the voltage of the connected device.
• **Pusher Speed**: Adjust the speed of pusher functions.
• **Vehicle Sensitivity**: Fine-tune the responsiveness of the vehicle.
• **Motor Hall Learning**: For motor calibration.
• **Fine-tuning Assistance**: Aids in precise adjustments.
• **Language Settings**: Switch between Chinese and English.
• **Channel Reverse**: Reverse the direction of specific channels.
• **Wireless Power**: Manage wireless transmission settings.
• **Anti-interference**: Optimize for stable signal.

4. Maintenance

To ensure the longevity and optimal performance of your MicroZone C7 MINI Plus remote control system, follow these maintenance guidelines:

• **Cleaning**: Regularly wipe the controller and receiver with a soft, dry cloth. Avoid using harsh chemicals or solvents.
• **Storage**: Store the device in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity.
• **Battery Care**: For the built-in battery, avoid fully discharging it for extended periods. Recharge it periodically if not in use.
• **Physical Inspection**: Periodically check for any loose connections, damaged wires, or physical wear and tear.
• **Firmware Updates**: Check the manufacturer's website for any available firmware updates to ensure the best performance and compatibility.

5. Troubleshooting

If you encounter issues with your C7 MINI Plus system, refer to the following common troubleshooting steps:

5.1 No Power / Controller Not Turning On

• Ensure the controller is fully charged. Connect it to a Type-C charger and check the charging indicator.
• Verify the power button is pressed correctly.

5.2 No Control / Loss of Signal

• **Re-pair the controller and receiver**: Follow the pairing instructions in Section 2.3.
• **Check receiver power**: Ensure the MC210R receiver is receiving adequate power (DC 4.5-6V).
• **Check connections**: Verify all wires between the receiver and your model's components are securely connected.
• **Range**: Ensure you are within the specified control range (>800m for controller, >500m for receiver).
• **Interference**: The 2.4GHz chip is designed for enhanced anti-interference. However, strong local interference can still affect performance. Try operating in a different location.

5.3 Emergency Stop Activated

• If the emergency stop button has been pressed, the system will pause operation. Rotate the red emergency stop switch to the right to release it and resume control.

5.4 Low Voltage Alarm

• If a low voltage alarm is triggered, it indicates that the controller's internal battery or the connected device's battery is running low. Recharge or replace the battery as necessary.

6. Specifications

6.1 C7 MINI Plus Remote Controller Specifications

6.2 MC210R Receiver Specifications

7. User Tips

• Always perform a range check before operating your model, especially in new environments, to ensure a stable connection.
• Familiarize yourself with the emergency stop function and its operation before using the controller with any machinery.
• Regularly check the controller's display for battery status and any warning indicators to prevent unexpected power loss during operation.
• When configuring complex settings like mixing or joystick modes, make small adjustments and test them thoroughly to understand their impact on your model's behavior.
• Keep the firmware of both the controller and receiver updated to benefit from the latest features and bug fixes.

8. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase records for any warranty claims.