1. Introduction
Thank you for choosing the Baseus E3 Bluetooth Earphones. This manual provides detailed instructions on how to set up, use, and maintain your earphones to ensure optimal performance and longevity. Please read this manual carefully before using the product.
2. Package Contents
Please check the package for the following items:
- Charging Case × 1
- Earbud (L&R) × 2
- Quick Start Guide × 1
- Charging Cable × 1
- Safety Instructions × 1

3. Powering On/Off
Power On:
- Open the charging case and remove the earbuds. They will power on automatically and enter pairing mode.
- For first-time use, remove the insulation stickers from the earbuds, place them back into the charging case and close the lid. Then, take them out to begin pairing.
Power Off:
- Place the earbuds back in the charging case and close the lid.

4. Wearing the Earbuds
- Identify the left (L) and right (R) earbuds by their button color and tactile dots, then place them onto the correct ears.
- Ensure the open-ring joint of the earbuds is positioned horizontally. Adjust slightly up or down for the best fit and comfort.

5. Bluetooth Pairing
To connect your Baseus E3 Earphones to a device:
- When the earbuds are powered on, enable Bluetooth on your phone or other device.
- Select "Baseus Bass BC1" (or similar, e.g., "Baseus E3") from the list of available devices to pair.

6. Multipoint Pairing
The Baseus E3 Earphones support multipoint pairing, allowing connection to two devices simultaneously:
- Connect the earbuds to device A. Then, turn off Bluetooth on device A.
- Connect the earbuds to device B.
- Turn on Bluetooth on device A; the earbuds will automatically reconnect to it. Your multipoint connection is now ready.

7. Button Controls
The earbuds feature touch-sensitive controls for various functions:
| Action | Function |
|---|---|
| Single press (×1) | Play/Pause (Music mode), Answer/Hang up (Instant mode) |
| Double press (×2) | Activate voice assistant (Music mode) |
| Triple press (×3) | Turn on/off low latency mode (Low delay mode) |
| Long press left earbud (L) for 1.5s | Switch to previous song (Music mode) |
| Long press right earbud (R) for 1.5s | Switch to next song (Music mode) |
| Long press any earbud for 3s | Reject call (Instant mode) |

8. App Control
Enhance your experience by downloading the official Baseus App. The app allows for customization of settings and access to additional features.
- Download the Baseus App and link it to your earbuds.

9. Customizing Settings
Through the Baseus App, you can access and customize the following functions:
- Spatial Acoustics: Normal / Music / Cinematic
- Low Latency Mode: On / Off
- Bass Boost (Default Setting): On / Off
10. Finding Your Earbuds
If you misplace your earbuds, you can use the "Search Earbud" feature in the Baseus App:
- Activate "Search Earbud" in the App within 35 hours.
- The earbuds will beep with an alarm sound to help you locate them.
- Important: To protect your hearing, avoid wearing the earbuds during this process.

11. Charging & Recharging
To charge the Baseus E3 Earphones and their charging case:
- Place the earbuds into the charging case.
- Connect the charging case to a power source using the provided USB-C charging cable.
- The power delivered by the charger must be between a minimum of 2.5 Watts and a maximum of 5 Watts to achieve maximum charging speed.
- The earbuds feature Baseus instant flash charging technology: charging for 10 minutes provides 2 hours of listening time.

12. Battery Indicator
The charging case has LED indicators to show battery status:
When opening/closing the lid:
- >40%: Lights green
- 20% to 40%: Lights yellow
- <20%: Lights red
When recharging the case:
- 100%: Green light solid
- >40%: Green light breathes
- 20% to 40%: Yellow light breathes
- <20%: Red light breathes

13. Factory Reset
If you encounter issues or wish to clear all settings, you can perform a factory reset:
- When the earbuds are disconnected, press and hold the L and R earbud buttons for approximately 8 seconds.
- This will reset the earbuds and restore custom settings in the App.

14. Specifications
| Feature | Detail |
|---|---|
| Name | Baseus Open-Ear TWS Earbuds |
| Model | PM153 |
| Bluetooth Version | V6.0 |
| Communication Range | 10 meters within an open environment |
| Earbud Battery Capacity | 40mAh / 0.148Wh |
| Charging Case Battery Capacity | 500mAh / 1.85Wh |
| Input | 5V-480mA |
| Output | 5V=130mA (65mA per port) |
| Frequency Response Range | 20 Hz – 20 kHz |
| Bluetooth Max Output Power | -3.42 dBm |
| Frequency Band | 2400 MHz – 2483.5 MHz |
| Charging Port | USB-C |
| Compatibility | Bluetooth-enabled playback devices |
*The above data is provided by the Baseus Lab; actual use will vary depending on the specific circumstances.

15. Warranty & Support
Baseus provides comprehensive support for its products. For FAQs, detailed manuals, and more information, please visit the official Baseus support center:
The product comes with a 24-month warranty and lifetime technical support.
You can also refer to the official user manual PDF for additional details: User manual (PDF)
Contact Us:
- Email: care@baseus.com
- Phone (US): +1 800 220 8056
16. Safety Information
Please read and follow these safety instructions to prevent fire, electric shock, damage, or other injuries:
Battery Safety:
- Replacement of a battery with an incorrect type can defeat its safeguard (e.g., for certain lithium battery types).
- Disposing of a battery in a fire or a hot oven or physically crushing or cutting it can lead to explosions.
- Leaving a battery in an environment with extremely high temperatures can cause explosions or the leakage of flammable liquid or gas.
- Using a battery in an environment with extremely low air pressure may result in explosions or flammable liquid or gas leakage.
- There is a risk of fire or explosion if the battery is replaced with an incorrect type.
- Avoid using the battery in extremely high or low temperatures and low air pressure at high altitudes during use, storage, or transportation.
Environmental Protection:
This product and its components should be recycled responsibly. Do not dispose of with household waste.

Manufacturer: Shenzhen Baseus Technology Co., Ltd.
Address: 2nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen
Website: www.baseus.com (Global)