LEKATO OD-02

Contents

LEKATO Super Drive OD-02 Overdrive Pedal

Instruction Manual

1. Introduction

The LEKATO Super Drive OD-02 Mini Overdrive Pedal is designed to enhance your electric guitar's tone with versatile overdrive effects. Inspired by classic green box circuits, this pedal offers two distinct modes: 'Normal' for a smooth, classic drive and 'Super' for intense, saturated tones. Its true bypass design ensures your original signal remains pure when the effect is disengaged, providing dynamic grit and clarity when activated. The compact and robust design makes it suitable for various musical environments, from practice to stage performances.

2. Features

  • Classic Green Overdrive Circuit: Restores the dynamic overdrive sound cherished by musicians.
  • Dual Mode Flexibility: Easily switch between 'Super' and 'Normal' modes for varied tonal characteristics.
  • Overdrive Boost: Enhances signal penetration and clarity when placed before a distortion source.
  • Sturdy & Portable Design: Constructed with a lightweight metal shell for durability and easy transport.
  • True Bypass Technology: Ensures signal integrity and prevents tone loss when the pedal is off.

3. Setup

Follow these steps to set up your LEKATO Super Drive OD-02 pedal:

  1. Power Connection: Connect a DC 9V (center negative) power adapter to the 'DC 9V' input jack on the side of the pedal. Note: The power supply adapter is not included.
  2. Input Connection: Connect your electric guitar to the 'INPUT' jack on the right side of the pedal using a standard 1/4-inch instrument cable.
  3. Output Connection: Connect the 'OUTPUT' jack on the left side of the pedal to your amplifier or the next pedal in your effects chain using a standard 1/4-inch instrument cable.
  4. Placement in Signal Chain: For an overdrive boost effect, place the OD-02 before other distortion or high-gain pedals. For a standalone overdrive, place it directly into your amplifier's input.
Lekato Super Drive OD-02 pedal connected to guitar and amplifier, demonstrating true bypass.
Figure 3.1: Pedal connected in a typical guitar setup, illustrating true bypass.
Lekato Super Drive OD-02 pedal dimensions and construction details.
Figure 3.2: Physical dimensions and robust aluminum alloy shell of the pedal.

4. Operating Instructions

The LEKATO Super Drive OD-02 features three control knobs and a mode switch to shape your tone.

4.1 Controls Overview

Top view of Lekato Super Drive OD-02 pedal with DRIVE, LEVEL, TONE knobs and SUPER/NORMAL switch labeled.
Figure 4.1: Control layout of the OD-02 pedal.
  • DRIVE Knob: Adjusts the amount of distortion applied to the input signal. Turn clockwise for more gain, counter-clockwise for less.
  • LEVEL Knob: Controls the overall output volume of the pedal. Adjust to balance the effect volume with your bypassed signal.
  • TONE Knob: Adjusts the brightness or darkness of the distorted tone. Turn clockwise for brighter tones, counter-clockwise for warmer tones.
  • SUPER/NORMAL Switch: Toggles between the two overdrive modes.
  • Footswitch: Engages or bypasses the effect. The LED indicator illuminates when the effect is active.
Diagram showing the functions of the TONE, LEVEL, and DRIVE knobs.
Figure 4.2: Functions of the TONE, LEVEL, and DRIVE knobs.

4.2 Operating Modes

The OD-02 offers two distinct overdrive modes:

  • Normal Mode: Provides a slightly overdriven sound, characteristic of classic TS-style pedals. This mode adds granularity and warmth to your guitar tone, ideal for blues, rock, and subtle boosts.
  • Super Mode: Delivers high saturation overdrive, making chords and strumming more powerful. This mode highlights the mid-range frequencies, suitable for lead playing and heavier rock genres.
Lekato Super Drive OD-02 pedal in Normal Mode, showing the switch position and describing the sound.
Figure 4.3: Normal Mode operation and tonal characteristics.
Lekato Super Drive OD-02 pedal in Super Mode, showing the switch position and describing the sound.
Figure 4.4: Super Mode operation and tonal characteristics.

4.3 True Bypass

The pedal features true bypass circuitry. When the effect is disengaged (LED off), your guitar signal passes directly through the pedal without any electronic interference, preserving your original tone. When engaged (LED on), the effect circuit is active.

4.4 Working Scenarios

Images showing the Lekato Super Drive OD-02 pedal used alone, in an effect series, for room practice, and during stage gigs.
Figure 4.5: Versatile usage scenarios for the OD-02 pedal.

5. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the pedal's exterior. Avoid using abrasive cleaners or solvents.
  • Power Supply: Always use a regulated DC 9V (center negative) power supply with a current rating of at least 10mA. Using an incorrect power supply can damage the unit and void the warranty.
  • Storage: Store the pedal in a dry environment, away from direct sunlight, extreme temperatures, and high humidity.
  • Handling: Although built with a durable metal shell, avoid dropping or subjecting the pedal to harsh impacts to prevent internal damage.

6. Troubleshooting

If you encounter issues with your OD-02 pedal, refer to the following common troubleshooting steps:

  • No Sound:
    1. Ensure the power adapter is correctly connected and providing power (LED should light up when engaged).
    2. Check all instrument cables for proper connection and functionality.
    3. Verify that your guitar and amplifier are working correctly.
    4. If using other pedals, try connecting the OD-02 directly to your guitar and amplifier to isolate the issue.
  • Unwanted Noise/Hum:
    1. Ensure you are using a high-quality, regulated DC 9V (center negative) power supply. Unregulated power supplies can introduce noise.
    2. Check for faulty or unshielded instrument cables.
    3. Try moving the pedal away from other electronic devices that might cause interference.
  • Effect Not Engaging:
    1. Ensure the footswitch is pressed firmly.
    2. Check the power supply.
  • Tone Issues:
    1. Adjust the DRIVE, LEVEL, and TONE knobs to find your desired sound.
    2. Experiment with the SUPER/NORMAL mode switch.
    3. Consider the pedal's placement in your effects chain relative to other gain or modulation pedals.

7. Specifications

FeatureSpecification
BrandLEKATO
PowerDC 9V (Center Negative)
BypassTrue Bypass
Input Impedance100kΩ
Output Impedance100Ω
Current Draw10mA
CircuitAnalog
Weight6.4oz / 181g
Dimensions (L x W x H)3.82 x 2.01 x 1.97in / 97 x 51 x 50mm

Note: Power cable is not included.

Detailed specification table for the Lekato Super Drive OD-02 pedal.
Figure 7.1: Comprehensive specifications of the OD-02 pedal.

8. User Tips

  • Gain Staging: Experiment with the DRIVE knob in conjunction with your amplifier's gain settings. Lower DRIVE settings on the pedal can provide a clean boost, while higher settings offer more pronounced overdrive.
  • Pedalboard Placement: For optimal results, try placing the OD-02 before other modulation (chorus, flanger) or time-based (delay, reverb) effects. If you use a separate distortion pedal, placing the OD-02 before it can act as a boost, pushing the distortion into heavier saturation.
  • Tone Control: The TONE knob is highly interactive. Adjust it carefully to cut through a mix or to warm up your sound, depending on your guitar and amplifier's natural EQ.

9. Warranty & Support

For warranty information and customer support, please refer to the documentation provided at the time of purchase or contact the seller directly. Keep your proof of purchase for any warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.