Introduction
The PGST E10D-EN Solar PIR Alarm Detector is an advanced security device designed to protect your property with its passive infrared (PIR) motion sensing capabilities and loud siren. Featuring solar charging, USB backup charging, and smart home integration via Tuya Smart Life, this outdoor-rated alarm provides reliable security in various environments. This manual provides essential information for the proper installation, operation, and maintenance of your device.
Product Overview
The PGST E10D-EN combines a solar panel, PIR motion sensor, siren, and flashing lights into a compact, weather-resistant unit. It can be controlled via a remote or integrated into smart home systems.
Setup
1. Charging the Device
Before initial use, ensure the device is adequately charged.
- Solar Charging: Place the device in direct sunlight for at least 4 hours. The solar panel on top will charge the internal battery.
- USB Charging: For faster or initial charging, connect the device to a 5V USB power source. Full charge typically takes over 8 hours via USB.
2. Mounting the Device
Choose a mounting location that provides optimal sunlight exposure for the solar panel and an unobstructed view for the PIR motion sensor.
- Mount the device securely on a wall or pole using appropriate hardware (not included).
- Ensure the sensor has a clear line of sight to the area you wish to monitor. The detection range is 9-12 meters with a 125° ultra-wide detection angle.
- The device is IP65 waterproof, making it suitable for outdoor installation in various weather conditions.
3. Smart Home Integration (Tuya Smart Life)
For smart control and integration with platforms like Alexa and Google Assistant, connect the device to your home Wi-Fi network via the Tuya Smart Life app. Refer to the Tuya Smart Life app's instructions for pairing new devices.
Operating the Device
1. Remote Control Functions
The included remote control allows for easy management of the alarm detector from up to 5 meters (16 feet) away.
- Arm/Disarm: Activate or deactivate the alarm system.
- Volume Levels: Adjust the siren volume (High, In, Low).
- Working Modes: Switch between the three available modes.
- Alarm Ringtones: Select from 2 different alarm sounds.
- Sound/Light On/Off: Control the siren sound and flashing light independently.
2. Working Modes
The device offers three distinct working modes to suit different security needs:
- Mode 1 (All-day Alarm Mode): The alarm will activate with both flash and sound upon motion detection, 24 hours a day.
- Mode 2 (Daytime Alarm Mode): The alarm will activate with both flash and sound upon motion detection during daylight hours.
- Mode 3 (Night Alarm Mode): The alarm will activate with flash only upon motion detection during nighttime hours.
3. High-Volume Alarm
The siren produces a high-pitched alarm of 120dB, providing a strong deterrent effect. Volume can be adjusted to High, In (medium), or Low.
4. Application Scenarios
The versatility of the PGST E10D-EN allows for deployment in various locations:
- Garage: Secure your vehicle and tools.
- Courtyard: Protect outdoor living spaces.
- Indoor: Add an extra layer of security inside your home.
- Doorway: Monitor entry and exit points.
- Garden, Yard, Farm, Orchard: Ideal for protecting outdoor areas from intruders or animals.
Maintenance
1. Cleaning
- Regularly wipe the solar panel with a soft, damp cloth to ensure maximum charging efficiency.
- Keep the PIR sensor lens clean and free from dust or obstructions to maintain optimal detection performance.
2. Battery Care
- The device is designed for long-term use with its solar charging capability. When fully charged, it can last for approximately 365 days in standby mode.
- If the device is stored for an extended period, ensure it is fully charged before storage and periodically recharged to prolong battery life.
3. Weather Protection
While the device is IP65 waterproof, extreme weather conditions (e.g., heavy snow, prolonged sub-zero temperatures) may affect performance. Ensure the device is securely mounted to prevent damage from strong winds.
Troubleshooting
- No Alarm/Flash:
- Check if the device is powered on and sufficiently charged (solar or USB).
- Verify the selected working mode (Mode 1, 2, or 3) is appropriate for the current conditions.
- Ensure the remote control is within range (5m) and its battery is functional.
- Check for any obstructions blocking the PIR sensor's view.
- False Alarms:
- Adjust the sensitivity setting on the remote control (if available, check for 'SENSITIVITY HIGH/LOW' options).
- Ensure there are no moving objects (e.g., tree branches, large pets) within the detection zone that could trigger the sensor.
- Avoid placing the device near heat sources or areas with rapid temperature changes.
- Charging Issues:
- For solar charging, ensure the solar panel receives at least 4 hours of direct sunlight daily.
- For USB charging, ensure the USB cable and power adapter are working correctly and connected securely.
- Remote Control Not Responding:
- Replace the battery in the remote control.
- Ensure you are within the 5-meter operating range of the device.
Specifications
| Feature | Detail |
|---|---|
| Model Number | E10D-EN |
| Brand Name | PGST |
| Origin | Mainland China |
| Certification | CE, FCC, RoHS |
| Smart Home Platform | Alexa, Tuya, Google Assistant |
| Alarm Volume | 120dB (3 adjustable levels) |
| Detection Distance | 9-12 meters |
| Detection Angle | 125° (Ultra-wide) |
| Waterproof Rating | IP65 |
| Charging Options | Solar, USB |
| Device Dimensions (H x W x D) | 13.3cm (5.24in) x 8cm (3.15in) x 7.2cm (2.83in) |
| Remote Dimensions (H x W x D) | 8.55cm (3.36in) x 3.95cm (1.555in) x 0.65cm (0.255in) |
User Tips
- Smart Home Connectivity: For full smart home functionality, ensure your device is successfully connected to your home Wi-Fi network via the Tuya Smart Life app. This enables integration with voice assistants like Alexa and Google Assistant.
- Optimal Solar Charging: Position the device where the solar panel receives direct sunlight for the longest duration possible, especially during winter months, to maximize battery life and minimize the need for USB charging.
- PIR Sensor Placement: When mounting, consider the height and angle to optimize detection for human-sized movement while minimizing triggers from small animals or environmental factors.
Warranty and Support
For any product-related inquiries, technical support, or warranty claims, please contact the manufacturer or your point of purchase. Keep your purchase receipt as proof of purchase.
