1. Important Safety Information
⚠️ Disclaimer: Please mind potential fire risk and strictly follow the instruction manual for charging and storage. While using the product, please wear protective equipment and fully comply with the applicable law and regulations.
Always perform a pre-ride inspection to ensure all components are in good working order. Familiarize yourself with local e-bike regulations before riding.
2. Product Overview
The DUOTTS E29 is a high-performance off-road electric bicycle designed for versatile terrain. It features a powerful motor, long-lasting battery, and robust suspension system to provide an exhilarating riding experience.


3. Setup and Assembly
Your DUOTTS E29 electric bike comes partially assembled. Follow these steps to complete the assembly and prepare for your first ride.
3.1 Unpacking
- Carefully remove the bike and all components from the packaging.
- Inspect for any shipping damage. Contact customer support immediately if you find any issues.
- Remove all protective packaging materials.
3.2 Handlebar Installation
- Attach the handlebar to the stem, ensuring it is centered and the brake levers and shifters are in a comfortable position.
- Tighten the stem bolts securely.
3.3 Pedal Installation
- Identify the left (L) and right (R) pedals.
- Apply a small amount of grease to the pedal threads.
- Screw the right pedal (R) clockwise into the right crank arm.
- Screw the left pedal (L) counter-clockwise into the left crank arm.
- Tighten both pedals firmly with a wrench.
3.4 Seat Post and Saddle Adjustment
- Insert the seat post into the frame's seat tube.
- Adjust the saddle height so your leg has a slight bend at the knee when the pedal is at its lowest point.
- Ensure the quick-release lever or seat post clamp is securely tightened.
3.5 Tire Inflation
- Check the recommended tire pressure on the sidewall of the tires.
- Inflate the tires to the recommended pressure using a suitable pump.
3.6 Battery Installation and Initial Charge
- Ensure the bike is turned off.
- Insert the battery pack into its compartment on the frame. Ensure it clicks securely into place and is locked to prevent misoperation.
- Connect the charger to the battery charging port and then to a power outlet.
- Allow 6-7 hours for the initial full charge. The charger indicator will change when fully charged.

4. Operating Instructions
4.1 Powering On/Off
Press and hold the power button on the 5-speed multi-function LCD display to turn the bike on or off.
4.2 Display Functions
The LCD display shows speed, battery level, assist level, trip distance, and other vital information. Use the control buttons near the display to cycle through different modes and adjust settings.

4.3 Pedal Assist System (PAS)
The DUOTTS E29 features a mid-axis torque sensor that detects your pedaling force for smoother and smarter power assistance. Select your desired assist level (1-5) using the display controls. The motor will provide assistance as you pedal.

4.4 Gear Shifting
The bike is equipped with a Shimano 14-speed gear system. Use the shifters on the handlebar to change gears according to terrain and desired speed. Shift smoothly to avoid strain on the drivetrain.

4.5 Braking
The DUOTTS E29 features front and rear hydraulic disc brakes for instant and powerful stopping power in all conditions. Squeeze both brake levers simultaneously for effective braking. Avoid sudden, hard braking, especially at high speeds or on loose surfaces.

4.6 Suspension Adjustment
The bike is equipped with DNM Air Suspension, including a tunable front fork and adjustable rear air shock. Refer to the suspension manufacturer's guide for detailed adjustment procedures to match your weight and riding style.

5. Maintenance
Regular maintenance ensures the longevity and safe operation of your DUOTTS E29 electric bike.
5.1 Cleaning
- Clean the bike regularly with a damp cloth and mild soap. Avoid high-pressure washers directly on electrical components.
- Lubricate the chain after cleaning or riding in wet conditions.
5.2 Battery Care
- Charge the battery regularly, even if not in use, to maintain its health.
- Store the battery in a cool, dry place, away from direct sunlight and extreme temperatures.
- Do not fully discharge the battery frequently.
- Use only the original charger provided.
5.3 Brake System
- Regularly check brake pads for wear and replace them when necessary.
- Ensure brake levers have proper tension and the hydraulic system is free of leaks.
5.4 Tires
- Check tire pressure before each ride.
- Inspect tires for cuts, punctures, or excessive wear.
5.5 Fasteners
- Periodically check all bolts and nuts for tightness, especially on the handlebars, stem, seat post, and wheels.
6. Troubleshooting
Here are some common issues and their potential solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Bike does not power on | Battery not charged or not properly installed; loose connections | Ensure battery is fully charged and securely seated. Check all electrical connections. |
| Motor not assisting | Low battery; PAS level set to 0; brake levers engaged; motor connection issue | Charge battery; increase PAS level; ensure brake levers are fully released; check motor cable connection. |
| Brakes feel weak | Worn brake pads; air in hydraulic line; misaligned calipers | Inspect and replace brake pads; bleed hydraulic system (professional service recommended); adjust caliper alignment. |
| Gears not shifting smoothly | Derailleur out of adjustment; bent hanger; dirty chain | Adjust derailleur; check for bent hanger; clean and lubricate chain. |
| Unusual noises | Loose components; dry chain; brake rub | Inspect and tighten all bolts; lubricate chain; adjust brake calipers. |
7. Specifications
Detailed technical specifications for the DUOTTS E29 Electric Bike:

| Feature | Specification |
|---|---|
| Model Name | E29 Electric Bicycle |
| Frame Material | All-Aluminum Alloy Frame |
| Front Fork | Aluminum Suspension Front Fork |
| Motor | Bafang 48V*250W (Peak 720W) Brushless Motor |
| Battery | 48V 13.5Ah Lithium Battery (Removable) |
| Display | 5-Speed Multi-Function LCD with Bluetooth |
| Max Speed | 25 KM/H (Speed Limited) |
| Range per Power | Pure Electric: 35-45 KM, Auxiliary: 80-90 KM |
| Charging Time | 6-7 Hours (54.6V 2A Charger) |
| Tires | 27.5*2.6 Inch MAXXIS Off-Road Tyre |
| Gear System | Shimano 14-Speed Gear System |
| Brakes | Front and Rear Hydraulic Disc Brakes |
| Net Weight | 26.6 KG |
| Gross Weight | 34.5 KG |
| Package Size | 1500*250*810 MM |
| Recommended Rider Height | 170-200 cm |
| Max Payload | 150 KG |
| Waterproof Rating | IPX4 |
| Certification | CE |
| Rated Passenger Capacity | One Seat |
| Origin | Mainland China |

8. User Tips
Based on general e-bike usage and available information:
- Pre-Ride Check: Always check tire pressure, brake function, and battery level before each ride.
- Terrain Adaptability: The 27.5"x2.6" MAXXIS off-road tires are designed for various terrains including forest roads, snow roads, sand roads, and mountain roads. Adjust your riding style and speed accordingly.
- Charging Habits: For optimal battery life, avoid completely draining the battery frequently. Charge it after each significant ride.
- Security: Always lock your bike and remove the battery when leaving it unattended to prevent theft and misoperation.

9. Warranty and Support
For warranty claims, technical support, or spare parts, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.
For general inquiries or further assistance, refer to the contact information provided at the point of purchase.