Roborock A30 Pro Steam Electric Wet and Dry Handheld Vacuum Cleaner

1. Product Overview

The Roborock A30 Pro Steam is a versatile electric wet and dry handheld vacuum cleaner designed for comprehensive household cleaning. It combines powerful vacuuming with steam mopping capabilities, offering an efficient solution for various floor types.

Main unit of the Roborock A30 Pro Steam vacuum cleaner.

2. Safety Instructions

Before using the appliance, please read this instruction manual carefully and keep it for future reference. Always follow basic safety precautions to reduce the risk of fire, electric shock, or injury.

• Do not use the appliance outdoors or on wet surfaces.
• Do not allow to be used as a toy. Close attention is necessary when used by or near children.
• Use only as described in this manual. Use only manufacturer’s recommended attachments.
• Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
• Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Do not handle plug or appliance with wet hands.
• Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow.
• Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
• Turn off all controls before unplugging.
• Use extra care when cleaning on stairs.
• Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Do not use without dust bag and/or filters in place.

3. Setup

3.1 Unpacking

Carefully remove all components from the packaging. Inspect for any damage during transit. Retain packaging for future storage or transport.

3.2 Assembly

1. Attach the handle to the main body of the vacuum cleaner. Ensure it clicks securely into place.
2. Verify that the brush head is correctly attached to the main unit.
3. Ensure the clean water tank and dirty water tank are properly installed.

The Roborock A30 Pro Steam with its various components and attachments.

3.3 Initial Charging

Before first use, fully charge the vacuum cleaner. Connect the power adapter to the charging port and plug it into a suitable power outlet. The indicator lights will show charging status.

3.4 Filling Water Tanks

Open the clean water tank and fill it with tap water. For enhanced cleaning, you may add a recommended cleaning solution. Do not overfill. Ensure the dirty water tank is empty and correctly seated before operation.

Diagram illustrating the intelligent cleaning liquid addition system.

4. Operating Instructions

The Roborock A30 Pro Steam offers powerful wet and dry cleaning with advanced features for optimal performance.

4.1 Power On/Off

Press the power button located on the handle to turn the device on or off.

4.2 Cleaning Modes

The device features multiple cleaning modes, including:

• Wet Mopping & Vacuuming: For simultaneous washing and vacuuming of hard floors. The intelligent system automatically adds cleaning liquid as needed.
• Steam Washing: Utilizes 150°C steam for deep cleaning and sanitization.
• Dry Vacuuming: For picking up dry debris and dust.

Key features including 150°C Steam Washing, 86°C high temperature water, double teeth for hair, 12.5cm lie-flat design, intelligent cleaning liquid, 22000Pa washing, AI assistance, 150°C steam self-cleaning, 80min battery life, and 14-day sewage odor prevention.

4.3 Advanced Features

• AI Assistance: The device provides all-round assistance for optimized cleaning performance.
• Double Teeth Brush Roll: Designed to prevent hair entanglement, ensuring consistent cleaning performance.
• Ultra-Thin Lie-Flat Design: The 12.5cm low-profile design allows for easy cleaning under furniture and hard-to-reach areas.

The vacuum's low-profile design allows it to lie flat for cleaning under furniture.

5. Maintenance

Regular maintenance ensures the longevity and optimal performance of your Roborock A30 Pro Steam.

5.1 Self-Cleaning Function

The device features a 150°C steam self-cleaning function. After each use, place the vacuum on its charging dock and activate the self-cleaning cycle as per the on-screen instructions or manual controls. This helps to clean the brush roll and internal pathways, preventing odors and maintaining hygiene.

5.2 Emptying and Cleaning Dirty Water Tank

After each wet cleaning session, empty the dirty water tank. Rinse the tank thoroughly with clean water and allow it to air dry before re-installing. This prevents the accumulation of dirt and odors, contributing to the 14-day sewage odor prevention feature.

5.3 Cleaning the Brush Roll

Periodically inspect the brush roll for tangled hair or debris. The double teeth design helps prevent entanglement, but manual cleaning may still be required. Remove the brush roll as instructed in the manual and clear any obstructions. Rinse if necessary and ensure it is dry before re-installation.

Close-up of the brush head, highlighting the double teeth design for preventing hair entanglement.

5.4 Filter Maintenance

The device is equipped with a washable filter. Remove the filter, rinse it under running water, and allow it to completely air dry before placing it back into the vacuum. Replace the filter if it shows signs of wear or damage.

6. Troubleshooting

If you encounter issues with your Roborock A30 Pro Steam, refer to the following common problems and solutions:

• Device not turning on: Ensure the battery is charged. Check if the power button is pressed correctly.
• Low suction power: Check if the dirty water tank is full or if the filter is clogged. Clear any blockages in the brush roll or air pathways.
• No steam or insufficient steam: Ensure the clean water tank has enough water. Check if the steam function is activated.
• Water leakage: Verify that both clean and dirty water tanks are correctly installed and sealed. Check for any cracks or damage to the tanks.
• Unusual noise: Turn off the device and check for any foreign objects caught in the brush roll or suction inlet.

If the problem persists after attempting these solutions, please contact customer support.

7. Specifications

8. User Tips

To maximize your cleaning experience and the lifespan of your Roborock A30 Pro Steam:

• Always ensure the clean water tank is filled and the dirty water tank is empty before starting a wet cleaning session.
• For stubborn stains, allow the steam function to work on the area for a few seconds before moving the vacuum.
• Regularly check the brush roll for any debris, even with the anti-tangle design, to maintain optimal performance.
• Utilize the self-cleaning function after every use to keep the device hygienic and prevent odors.
• Store the vacuum in a dry place and ensure it is fully charged for its next use.

9. Warranty and Support

For any product-related inquiries, technical support, or warranty claims, please contact the seller directly. You can reach out via:

• Email: lisa@strovan.com
• WhatsApp: +86 19073168614

Please provide your purchase details and model number when contacting support for faster assistance.