1. Introduction
The SpeedyBee Master 5 V1 V2 is a programmable WS2812 Cellular LED board designed for FPV drones. This 5V RGB LED offers customizable lighting options, making your drone stand out with bright and durable illumination. This manual provides essential information for the proper setup, operation, and maintenance of your LED board.
2. Setup and Installation
The SpeedyBee Master 5 LED board offers flexible connection options to your Flight Controller (FC).
2.1 Connection Methods
You can connect the LED strip using two primary methods:
- Direct Plugging: Connect the LED strip directly to your FC via the provided connector.
- Soldering: Solder the connection cable to the appropriate pads on your FC. This method supports both soldering and free-soldering configurations.
2.2 ESC Protection
A shockproof foam is included to protect the LED board from potential interference or damage from the Electronic Speed Controller (ESC). Ensure proper placement of this foam during installation.
3. Operating Instructions
The SpeedyBee Master 5 V1 V2 LED board features programmable WS2812 cellular LEDs, allowing for extensive customization of lighting patterns and colors. Configuration is typically done via your Flight Controller's software (e.g., Betaflight, EmuFlight, INAV) where you can define LED sequences, colors, and effects. Refer to your Flight Controller's documentation for specific software setup instructions for WS2812 LEDs.
3.1 Powering On/Off
The LED board is powered directly from your Flight Controller's 5V output. It will illuminate when the FC receives power and is configured to control the LEDs.
3.2 Customization
Utilize your Flight Controller's configurator software to program desired LED patterns, colors, and responses to flight modes or events. Ensure the correct LED type (WS2812) and number of LEDs are selected in the software.
4. Maintenance
To ensure the longevity and optimal performance of your SpeedyBee Master 5 V1 V2 LED board, follow these maintenance guidelines:
- Cleaning: Gently clean the LED board with a soft, dry brush or compressed air to remove dust and debris. Avoid using liquids or harsh chemicals.
- Inspection: Periodically inspect the solder joints and connections for any signs of damage or corrosion.
- Storage: When not in use, store the LED board in a dry, anti-static environment.
- Handling: Handle the board by its edges to avoid touching the electronic components, especially the LEDs, which can be sensitive to static discharge.
5. Troubleshooting
If you encounter issues with your LED board, consider the following troubleshooting steps:
- LEDs not lighting up:
- Check all connections to the Flight Controller (5V, GND, DIN) for proper seating and continuity.
- Verify that the Flight Controller is supplying 5V power to the LED output.
- Ensure the LED feature is enabled and correctly configured in your Flight Controller's software (e.g., Betaflight LED Strip tab).
- Confirm the correct number of LEDs and the WS2812 type are selected in the software.
- Incorrect colors or flickering:
- Check for loose connections or damaged wires.
- Ensure the data line (DIN) is properly connected and not experiencing interference.
- Review your Flight Controller's software configuration for any errors in LED setup.
- Partial LED failure:
- This may indicate a damaged LED or a break in the data line. Inspect the board for physical damage.
If problems persist after these steps, contact SpeedyBee support or your retailer for further assistance.
6. Specifications
Below are the detailed specifications for the SpeedyBee Master 5 V1 V2 Programmable WS2812 Cellular LED board:
6.1 General
- Model Number: Master 5 V1 V2
- Material: Metal
- Quantity: 1 pcs
- For Vehicle Type: Airplanes (FPV Drones)
- Tool Supplies: Assembled class
- Four-wheel Drive Attributes: Assemblage
- Remote Control Peripherals/Devices: ESC (for context, not part of the LED board itself)
- Upgrade Parts/Accessories: Programmable 2812 Cellular LED
- RC Parts & Accs: Programmable 2812 Cellular LED
- Recommend Age: 14+y
- Use: Vehicles & Remote Control Toys
- Certification: CE
- Is Electric: No Battery
- Is it battery/power supply: N
- Is it charger/adapter: N
- Is Batteries Included: No
- High-concerned chemical: None
- Size: NA (Specific dimensions provided below)
6.2 Dimensions and Weight
| Measurement | Value |
|---|---|
| Width | 21 mm |
| Height | 19 mm |
| Thickness | 4.7 mm |
| Weight | 1 g |
6.3 Lamp Beads Electrical Characteristics
Absolute Maximum Ratings (Temperature=25°C)
| Specifications | Symbol | Range | Unit |
|---|---|---|---|
| Logic power voltage | VDD | 3.0~7.5 | V |
| R/G/B output withstand voltage | Vds | 9 | V |
| Logic input voltage | VI1 | 0.5~5.5 | V |
| R/G/B output current | Iout | 12 | mA |
| Working temperature | Topr | -40~+85 | °C |
| Storage temperature | Tstg | -50~+150 | °C |
| ESD withstand voltage | Vesd | 5k | V |
Notice: Pulse width ≤0.1ms, duty ratio ≤1/10
Electrical Optical Characteristics (Temperature=25°C)
| Specifications | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Chip working voltage | VDD | - | 5 | 7.5 | V |
| R/G/B output withstand voltage | Vds | - | - | 9 | V |
| R/G/B output drive current | Iou | - | 12 | - | mA |
| High level input voltage | VIH | 0.7Vdd | - | - | V |
| Low level input voltage | VIL | - | - | 0.3Vdd | V |
| PWM frequency | FPWM | - | 4 | - | KHZ |
| Static power consumption | Idd | - | 0.3 | - | mA |
7. User Tips
- Pre-flight Check: Always perform a visual check of your LED connections before each flight to ensure they are secure.
- Software Configuration: Take time to explore the LED configuration options in your Flight Controller software. Many advanced features and effects can be unlocked with proper setup.
- Power Considerations: While the board operates on 5V, ensure your Flight Controller's 5V regulator can supply sufficient current for all connected LEDs, especially if you are using multiple LED strips.
8. Warranty and Support
For warranty information and technical support regarding your SpeedyBee Master 5 V1 V2 Programmable WS2812 Cellular LED, please refer to the official SpeedyBee website or contact the retailer from whom you purchased the product. Keep your proof of purchase for any warranty claims.
