1. Introduction
The FNIRSI FAM-02 is a professional-grade, high-precision handheld instrument designed for comprehensive environmental monitoring. It accurately measures wind speed, ambient temperature, and relative humidity. Featuring a robust eight-blade wind wheel for quick response, a clear display with dual themes, five types of unit switching, and a triple alarm system (sound, light, and vibration), the FAM-02 is suitable for various applications requiring precise environmental data.
2. Package Contents
Please check the package contents upon receipt to ensure all items are present and in good condition:
- FNIRSI FAM-02 Anemometer Unit
- User Manual
- Charging Cable (if applicable)
- Protective Case (if included)
3. Setup
3.1 Battery Installation and Charging
The FAM-02 comes with a built-in battery. Before first use, ensure the device is fully charged using the provided charging cable. Connect the cable to the device's charging port and a suitable USB power source. The charging indicator on the device will show its status.
3.2 Initial Power On
Press and hold the power button (usually located on the side or front panel) for a few seconds until the display illuminates. The device will perform a self-test and then enter the default measurement mode.
3.3 Basic Settings
Upon initial power-on or after a factory reset, you may need to configure basic settings:
- **Unit Switching**: Navigate through the settings menu to select your preferred units for wind speed (e.g., m/s, km/h, mph, knots, ft/min), temperature (°C/°F), and humidity (%). The device supports five types of unit switching for wind speed.
- **Theme Display**: The device offers a dual theme display. Access the display settings to switch between available themes for optimal readability in different lighting conditions.
- **Alarm Thresholds**: Set the desired wind speed threshold for the triple alarm function.
4. Operating Instructions
4.1 Power On/Off
- **Power On**: Press and hold the power button until the screen turns on.
- **Power Off**: Press and hold the power button until the screen turns off, or allow the device to auto-power off after a period of inactivity (configurable in settings).
4.2 Taking Measurements
Hold the device upright, ensuring the wind wheel is exposed to the airflow you wish to measure. The device will simultaneously display wind speed, temperature, and humidity on the screen.
4.3 Curve Recording Mode
The FAM-02 features a curve recording mode to visualize wind speed changes over a period of time. To activate this mode, navigate to the 'Curve Recording' option in the menu. The display will show a graphical representation of the wind speed data, making trends more intuitive to observe.
4.4 Strong Wind Warning
When the measured wind speed reaches or exceeds the preset threshold, the device will activate its triple alarm system, providing alerts through sound, light, and vibration. This feature is crucial for safety and timely awareness in high-wind conditions.
5. Maintenance
5.1 Cleaning
- Regularly clean the exterior of the device with a soft, dry cloth.
- For the wind wheel, use a soft brush or compressed air to gently remove any dust or debris that might impede its rotation. Avoid using liquids or harsh chemicals.
5.2 Storage
When not in use, store the FAM-02 in a cool, dry place, away from direct sunlight and extreme temperatures. If storing for extended periods, ensure the battery is partially charged (around 50%) to prolong its lifespan.
5.3 Battery Care
Avoid fully discharging the battery frequently. Recharge the device when the battery level is low to maintain optimal battery health.
6. Troubleshooting
- **Device not powering on**: Ensure the battery is charged. If the issue persists, try connecting to a different charging source.
- **Inaccurate readings**: Check if the wind wheel is obstructed or dirty. Ensure the device is held correctly in the airflow.
- **Alarm not triggering**: Verify that the alarm threshold is set correctly in the device settings.
- **Display issues**: Try restarting the device. If the problem continues, ensure the device is not exposed to extreme temperatures.
7. Specifications
| Feature | Description |
|---|---|
| Brand | FNIRSI |
| Model Number | FAM-02 |
| Type | Anemometer |
| Measurements | Wind Speed, Temperature, Humidity |
| Wind Wheel | Eight-blade, Quick Response |
| Display | Dual Theme Display |
| Unit Switching | Five types for Wind Speed |
| Alarm System | Triple (Sound, Light, Vibration) |
| Battery Included | Yes |
| Origin | Mainland China |
| Package Dimensions | 10cm (Length) x 10cm (Width) x 10cm (Height) |
| Package Weight | 0.34 kg |
8. User Tips
- For the most accurate wind speed readings, ensure the device is held in an open area, free from obstructions that could create turbulence.
- When using the curve recording mode, allow sufficient time for data collection to observe meaningful trends.
- Regularly check and clean the wind wheel to prevent debris from affecting measurement accuracy.
- Keep the device away from strong electromagnetic fields, which could interfere with its sensors.
9. Warranty and Support
The FNIRSI FAM-02 is a Certified Original product. For any manufacturing defects or issues arising from normal use, please refer to the manufacturer's warranty policy. The product is typically covered by a standard manufacturer's warranty. For support, please contact the retailer or manufacturer directly. Free returns are available within 90 days of purchase, subject to the retailer's terms and conditions.
