Lekato Drum Buddy V2

Contents

Lekato Drum Buddy V2 Instruction Manual

3-in-1 Looper, Drum Machine, and Tuner Pedal

1. Introduction

The Lekato Drum Buddy V2 is a versatile 3-in-1 pedal designed for digital electric guitar and bass players. It integrates a high-quality looper, a smart drum machine, and a precise tuner into a single compact unit. This manual provides detailed instructions on how to set up, operate, and maintain your Drum Buddy V2 to enhance your musical creativity and practice sessions.

Lekato Drum Buddy V2 pedal, top view
Figure 1: Lekato Drum Buddy V2 Pedal

2. Product Overview: Controls and Connections

Familiarize yourself with the various controls and connection points on your Drum Buddy V2.

Detailed diagram of controls and connections on the Drum Buddy V2
Figure 2: Front and Rear Panel Layout

Front Panel Controls:

  • LOOPER VOL Knob/Indicator: Adjusts the volume of the recorded loop. The indicator light shows the status of the looper.
  • DRUM VOL Knob/Indicator: Adjusts the volume of the drum machine. The indicator light shows the status of the drum machine.
  • LOOPER Footswitch: Controls looper functions (record, play, overdub, stop, undo/redo).
  • DRUM Footswitch: Controls drum machine functions (start/stop, fill beats).
  • Left Button (<): Navigates menus or decreases values.
  • Right Button (>): Navigates menus or increases values.
  • Display Screen: Shows current tempo, tuner notes, loop status, and drum patterns.
  • Tempo Button: Used for tap tempo input and fine-tuning tempo.
  • LED Indicators (I, II, III, IV): Represent the four available loop storage positions.

Rear Panel Connections:

  • IN (1/4'' MONO audio input): Connect your instrument (guitar, bass) here.
  • OUT (1/4'' MONO audio output): Connect to your amplifier or audio interface.
  • USB (Type-C Jack): For USB data transmission to/from PC/Mac.
  • Headphone Output Jack (3.5mm): For silent practice.
  • DC 9V (Power Jack): Connect a 9V DC power adapter (central negative, ≥150mA).

3. Setup

Follow these steps to set up your Lekato Drum Buddy V2:

  1. Power Connection: Connect a DC 9V power adapter (center negative, ≥150mA, not included) to the DC 9V jack. Alternatively, you can power the unit via the USB Type-C port (5V, ≥300mA) from a computer or USB power supply.
  2. Power adapter requirements (DC 9V, central negative) and included USB cable
    Figure 3: Power Connection Details
  3. Instrument Connection: Connect your guitar or bass to the 'IN' 1/4'' MONO audio input.
  4. Output Connection: Connect the 'OUT' 1/4'' MONO audio output to your amplifier, mixer, or audio interface.
  5. Headphone Connection (Optional): For private practice, connect headphones to the 3.5mm headphone output jack. Adjust the headphone volume using the LOOPER VOL and DRUM VOL knobs.
  6. User interacting with the pedal, showing headphone jack use
    Figure 4: Using the Headphone Jack

4. Operating Instructions

4.1. Looper Pedal Functions

The Drum Buddy V2 features 4 loop memory positions, each capable of storing up to 5 minutes of recording, with a total recording capacity of 11 minutes. Each track supports unlimited overdubs.

  • Start Recording: Press the LOOPER footswitch once. The LOOPER VOL indicator will turn red.
  • Stop Recording/Start Playback: Press the LOOPER footswitch again to stop recording and immediately start playback. The LOOPER VOL indicator will turn green.
  • Overdub: While a loop is playing, press the LOOPER footswitch once to enter overdub mode. The LOOPER VOL indicator will flash red. Press again to stop overdubbing and continue playback.
  • Stop Playback: Double-press the LOOPER footswitch to stop playback.
  • Undo/Redo: While playing or overdubbing, press and hold the LOOPER footswitch for 2 seconds to undo the last recording. Hold again to redo.
  • Clear Loop: When the looper is stopped, press and hold the LOOPER footswitch for 2 seconds to clear the current loop.
  • Switch Loop Memory: Use the Left (<) and Right (>) buttons to select between the four loop memory positions (I, II, III, IV). The corresponding LED will light up.
  • Smart Fill Beats: The pedal automatically adjusts the length of your recorded phrase to units of one measure, ensuring seamless looping regardless of when you stop recording.
  • Diagram illustrating 'Smart Fill Beats' with drum cycles
    Figure 5: Smart Fill Beats Functionality

4.2. Drum Machine Functions

The drum machine offers 30 types of drum rhythms, including common time signatures like 4/4, 3/4, and 6/8.

  • Start/Stop Drum Machine: Press the DRUM footswitch once to start or stop the drum pattern. The DRUM VOL indicator will turn green when playing.
  • Select Drum Pattern: Use the Left (<) and Right (>) buttons to cycle through the 30 available drum patterns when the drum machine is stopped.
  • Tap Tempo: Press the 'Tempo' button twice continuously to set the tempo. The speed range is 40-240 beats per minute. You can fine-tune the tempo using the Left (<) and Right (>) buttons after tapping.
  • Close-up of the display showing 'Smart Tempo Setting' with a tempo value
    Figure 6: Smart Tempo Setting
  • Customizing Drum Patterns: The Drum Buddy V2 supports customizing, editing, and saving drum patterns via an APP in real-time. Refer to the official Lekato website or app store for the companion application.
  • Image showing a drum rhythm grid for 30 drum rhythms
    Figure 7: Drum Rhythm Grid Interface (App/Software)

4.3. Tuner Function

The built-in high-precision tuner allows you to quickly and accurately tune your instrument.

  • Activate Tuner: Press and hold the 'Tempo' button for 2 seconds. The display screen will show the note being played.
  • Tuning Display: The display will show the note name (e.g., E, A, D, G, B, e). Sharp or flat signs will be indicated.
  • Exit Tuner: Press the 'Tempo' button again or any footswitch to exit tuner mode.
  • Close-up of the display showing tuner mode ('E')
    Figure 8: High Precision Tuner Display

4.4. Data Transfer

You can easily import and export WAV audio files to/from your PC or Mac using the USB Type-C connection.

  • Connect to PC/Mac: Use the provided USB cable to connect the Drum Buddy V2 to your computer.
  • Access Files: The pedal will appear as a removable storage device. You can then drag and drop WAV files for loops.
  • Supported Format: Ensure WAV files are 48KHz/24bit for optimal performance.
  • Image showing USB Type-C connection for data transfer to PC/Mac
    Figure 9: USB Data Transfer

5. Specifications

FeatureSpecification
InputStandard 1/4'' jack-MONO/TS
OutputStandard 1/4'' jack-MONO/TS
LOOP Recording Capacity11 minutes (total)
Single LOOP Position Recording Capacity5 minutes
Quantity of LOOP Storage Position4
LOOP Sampling Rate44.1KHz/24bit
Power Supply 1 (DC)DC 9V ≥150mA (center negative)
Power Supply 2 (USB)USB 5V ≥300mA
Working Current90mA (DC 9V), 125mA (USB 5V)
Input Impedance1Mohm
Output Impedance100 ohm
USB Connection TypeType-C

6. User Tips

  • Practice Timing: For seamless loops, practice your timing when pressing the LOOPER footswitch to start and stop recording. The Smart Fill Beats feature helps, but precise timing improves overall quality.
  • Experiment with Drum Patterns: Don't stick to just one drum pattern. Explore the 30 available rhythms to find what best suits your musical style and the loop you're creating.
  • Use the App: If available, utilize the companion app to customize and edit drum patterns, expanding your rhythmic possibilities.
  • Monitor Levels: Pay attention to the LOOPER VOL and DRUM VOL knobs to ensure a balanced mix between your instrument's loop and the drum track.
  • Headphones for Focus: Use headphones for focused practice sessions, especially when working on intricate loops or drum patterns.

7. Troubleshooting

If you encounter issues with your Drum Buddy V2, try the following troubleshooting steps:

  • No Power:
    - Ensure the DC 9V power adapter is correctly connected and providing power (center negative).
    - If using USB power, ensure the USB cable is securely connected and the power source is sufficient (5V, ≥300mA).
  • No Sound Output:
    - Check all audio cable connections (instrument to IN, OUT to amplifier/mixer). Ensure cables are fully inserted.
    - Verify that your instrument is working correctly and your amplifier/mixer is turned on and set to the correct input.
    - Adjust the LOOPER VOL and DRUM VOL knobs to ensure they are not set to minimum.
  • Looper Not Recording/Playing:
    - Ensure the LOOPER footswitch is pressed correctly to initiate recording or playback.
    - Check if a loop memory position is selected (LED I, II, III, or IV).
  • Drum Machine Not Playing:
    - Ensure the DRUM footswitch is pressed to start the drum pattern.
    - Check the DRUM VOL knob.
  • Tuner Not Activating:
    - Make sure you press and hold the 'Tempo' button for 2 seconds to activate the tuner.
  • Poor Audio Quality:
    - Ensure all connections are secure and free from interference.
    - If importing WAV files, verify they are 48KHz/24bit.

8. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the pedal's exterior. Do not use abrasive cleaners or solvents.
  • Storage: Store the pedal in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity.
  • Power Off: Always disconnect the power supply when the pedal is not in use for extended periods to prevent damage and conserve energy.
  • Avoid Impact: Protect the pedal from drops and impacts, which can damage internal components.

9. Warranty and Support

For warranty information and technical support, please refer to the documentation provided at the time of purchase or contact your retailer/manufacturer directly. Keep your proof of purchase for any warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.