Introduction
Thank you for choosing the LEKATO L6 Wireless Guitar System. This compact and versatile transmitter and receiver set provides a reliable, low-latency wireless connection for your electric acoustic instruments. Designed for ease of use and portability, the L6 system ensures a clear, uncompressed sound signal for optimal performance.
Features
- Universal Compatibility: Suitable for electric acoustic instruments such as guitar, bass, and violin.
- UHF Uncompressed Sound: Delivers high-quality, uncompressed audio signal transmission.
- Anti-interference & Ultra-short Delay: Engineered for stable performance with less than 4ms latency.
- Multi-device Support: Allows up to 4 sets of devices to operate simultaneously without interference.
- Extended Range: Offers a maximum transmission range of 50 meters in open fields and 30 meters through walls.
- Long Battery Life: Built-in rechargeable 600mAh lithium battery provides up to 4 hours of continuous working time.
- Convenient Charging: Includes a USB cable for easy recharging.
- Plug and Play: Simple operation for quick setup and use.
- Compact & Lightweight: Small size and light weight ensure excellent portability.
- Rotatable Plug: Features a 270-degree rotatable 1/4-inch plug, accommodating instruments with input jacks in various positions.
Specifications
| Parameter | Value |
|---|---|
| Frequency Response | UHF |
| Latency | Less than 4ms |
| Charging Port | Micro USB |
| Charging Time | Approximately 2 hours |
| Battery Life | Approximately 4 hours |
| Power Supply | Built-in Rechargeable Lithium Battery (3.7V/600mAh) |
| Transmission Range (Open Field) | Max. 50 meters |
| Transmission Range (Through-wall) | Max. 30 meters |
| Item Size (each unit) | 12.8 x 4.3 x 1.5 cm (5 x 1.69 x 0.59 inches) |
| Item Weight (each unit) | 38g (1.34 oz) |
| Package Size | 18.3 x 8.4 x 5 cm (7.2 x 3.31 x 1.97 inches) |
| Package Weight | 235g (8.29 oz) |
Package Contents
The LEKATO L6 Wireless Guitar System package includes:
- 1 x Wireless Receiver
- 1 x Wireless Transmitter
- 1 x USB Charging Cable
- 1 x User Manual (English)
Setup Guide
- Initial Charge: Before first use, fully charge both the transmitter and receiver using the provided USB cable. Connect the Micro USB end to the devices and the standard USB end to a compatible USB power adapter (not included). The indicator light will show charging status (usually red while charging, off or green when fully charged).
- Connect Transmitter: Plug the transmitter (marked "TX" or with a guitar icon) into the output jack of your instrument (guitar, bass, violin, etc.). Adjust the rotatable plug to fit securely.
- Connect Receiver: Plug the receiver (marked "RX" or with an amplifier icon) into the input jack of your amplifier, pedal, or audio interface. Adjust the rotatable plug as needed.
- Power On: Press and hold the power button on both the transmitter and receiver until their indicator lights illuminate. They should automatically pair. A solid green light typically indicates a successful connection.
- Channel Selection (if needed): The system supports up to 4 sets working simultaneously. If you experience interference or need to use multiple sets, consult the full manual for specific channel switching instructions (usually a short press of the power button or a dedicated channel button).
Operating Instructions
- Power On/Off: Press and hold the power button on each unit for a few seconds to turn them on or off.
- Status Indicators:
- TX (Transmitter): Red light indicates power/charging, Green light indicates signal transmission.
- RX (Receiver): Red light indicates power/charging, Green light indicates signal reception.
- A blinking light may indicate low battery or a pairing issue.
- Volume Control: Adjust the volume directly on your instrument and amplifier as you normally would. The wireless system transmits the signal without its own volume control.
- Optimal Placement: For best performance, ensure a clear line of sight between the transmitter and receiver, especially in environments with many obstacles.
- Avoiding Feedback: When using, avoid pointing the instrument directly at the speaker, and maintain a distance of at least 1.5 meters to prevent whistling or feedback. If feedback occurs, try reducing the amplifier's volume or adjusting the position of the speaker.
Maintenance
- Charging: Recharge the devices regularly, especially after prolonged use, to maintain battery health. Avoid completely draining the battery frequently.
- Cleaning: Wipe the units with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Storage: Store the system in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
- Handle with Care: Avoid dropping the units or subjecting them to strong impacts, as this can damage internal components.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound or intermittent sound |
|
|
| Whistling or feedback noise |
|
|
| Short battery life |
|
|
User Tips
No specific user tips were available from reviews or Q&A for this product. However, general tips for wireless guitar systems include:
- Always fully charge your units before a performance or long practice session.
- Keep the transmitter and receiver in line of sight for the most stable connection.
- Experiment with different positions for your amplifier and instrument to minimize potential interference or feedback.
- Turn off the units when not in use to conserve battery life.
Warranty and Support
LEKATO products are designed for reliability and performance. For any technical assistance, warranty claims, or support inquiries, please refer to the contact information provided with your purchase or visit the official LEKATO website. Please retain your proof of purchase for warranty purposes.
