ToolkitRC M6DAC PRO V2 Dual Channel Battery Charger Discharger

1. Introduction

The ToolkitRC M6DAC PRO V2 series represents a new generation of smart dual-channel battery chargers and dischargers, designed for enthusiasts and professionals in the FPV drone and RC hobby. This device offers powerful AC and DC input capabilities, high-current charging, and support for a wide array of battery chemistries. It is available in two versions: the M6DAC PRO and the M6DAC V2, each tailored to meet different power requirements and featuring sets.

Key features include:

• Dual-channel charging and discharging.
• High power output: DC 800W, AC 200W (V2) / AC 300W (PRO).
• Max 16A per channel charging current.
• Support for 1-6S LiHV/LiPo/LiFe/Lion/LTO, 1-16S NiMH, and 1-10S Pb batteries.
• Integrated PD65W USB-C fast charging output.
• Wireless charging function (M6DAC PRO version only).
• Smart 2.8-inch IPS LCD display for clear information.
• Automated fan speed control for efficient cooling.
• Comprehensive security protection features.

2. Safety Instructions

WARNING: Failure to follow these safety instructions may result in fire, property damage, or injury.

• Always operate the charger in a well-ventilated area, away from flammable materials.
• Never leave the charger unattended while in use.
• Ensure the correct battery type, cell count, and charging parameters are selected for the battery being charged. Incorrect settings can lead to severe damage or fire.
• Do not charge damaged, swollen, or leaking batteries.
• Keep the charger away from water, moisture, and extreme temperatures.
• Use only the original or approved power cables and accessories.
• Do not attempt to disassemble or modify the charger.
• Keep out of reach of children.

3. What's in the Box

Upon unpacking your ToolkitRC M6DAC PRO V2 series charger, please verify that all the following items are included:

• M6DAC PRO Charger (or M6DAC V2 Charger) x 1
• AC Input Cable x 1
• USB Cable x 1
• Quick Manual x 1
• Screen Protector x 1

4. Product Overview

The M6DAC PRO V2 series chargers feature a compact and robust design with an intuitive user interface. The front panel includes a vibrant 2.8-inch IPS LCD display, providing real-time charging status and battery information. Navigation is managed via a scroll wheel and an 'Exit/CH' key.

4.1. Controls and Display

• Display: 2.8-inch IPS LCD (320x240 resolution) for clear visibility of charging parameters and status.
• Scroll Wheel: Used for menu navigation (turn left or right) and selection (press OK).
• Exit/CH Key: Used to exit menus or switch between charging channels.

4.2. Ports and Connectors

The charger is equipped with multiple ports for power input, battery connection, and additional functionalities:

• Main Port (x2): For connecting batteries for charging/discharging.
• Balance Port (x2): For balancing multi-cell batteries during charging.
• Temp. Sensor Port (DS18B20 Type): For external temperature monitoring.
• States LED (x2): Indicators for charging status.
• AC Input: For connecting to mains power (100-240V).
• DC Input: For connecting to a DC power source (7-28V).
• USBC Output/Upgrade Port: Provides PD65W fast charging and is used for firmware updates.
• Wireless Charging Pad: (M6DAC PRO only) For charging compatible devices wirelessly.

5. Specifications

Detailed technical specifications for the ToolkitRC M6DAC PRO and M6DAC V2 chargers:

6. Initial Setup

6.1. Unpacking and Inspection

1. Carefully remove the charger and all accessories from the packaging.
2. Inspect the charger for any signs of damage during transit. If damaged, do not use and contact support.
3. Ensure all items listed in the 'What's in the Box' section are present.

6.2. Power Connection

The M6DAC PRO V2 series supports both AC and DC power inputs.

1. AC Power: Connect the provided AC input cable to the AC input port on the rear of the charger, then plug the other end into a suitable wall outlet (100-240V).
2. DC Power: Connect a DC power source (7-28V, MAX 30A) to the DC input port on the rear of the charger. Ensure correct polarity.
3. The charger will power on automatically once connected to a power source.

6.3. Battery Connection

1. Connect the main power lead of your battery to one of the main output ports (e.g., XT60) on the front of the charger.
2. For multi-cell batteries (LiPo, LiHV, etc.), connect the balance lead of the battery to the corresponding balance port next to the main output port. This is crucial for safe and balanced charging.
3. Ensure all connections are secure before proceeding.

7. Operation

7.1. Navigating the User Interface

The charger's functions are accessed via the 2.8-inch IPS LCD display and controlled by the scroll wheel and Exit/CH key.

• Scroll Wheel: Turn to scroll through menu options or adjust values. Press to confirm a selection or enter a submenu.
• Exit/CH Key: Press to go back to the previous menu or to switch between Channel 1 and Channel 2 when multiple channels are active.

7.2. Charging and Discharging Batteries

1. Select Channel: If using dual channels, press the Exit/CH key to select the desired channel (CH1 or CH2).
2. Select Battery Type: From the main menu, navigate to 'Battery Type' and select the chemistry of your battery (e.g., LiPo, LiHV, NiMH).
3. Set Parameters: Adjust the cell count (for Li-based batteries), charging current (Amps), and charging mode (e.g., Charge, Fast Charge, Balance Charge, Storage, Discharge).
4. Start Operation: Once all parameters are set, confirm the settings and start the charging/discharging process. The display will show real-time status, including voltage, current, capacity, and internal resistance.
5. Dynamic Light Strip: Observe the dynamic light strip on the charger, which provides a visual indication of the charging status.

7.3. Wireless Charging (M6DAC PRO Only)

The M6DAC PRO version features a convenient wireless charging pad on its top surface.

1. Ensure the charger is powered on.
2. Place a Qi-compatible device (e.g., smartphone) on the designated wireless charging area.
3. The charger will automatically detect the device and begin wireless charging.

7.4. USB-C Power Delivery (PD65W)

The USB-C port on the rear of the charger provides up to 65W of power delivery, suitable for fast charging laptops, smartphones, and other compatible devices.

1. Connect your device to the USB-C output port using a compatible USB-C cable.
2. The charger will automatically negotiate the appropriate power output for your device.

8. Maintenance

• Cleaning: Use a soft, dry cloth to clean the exterior of the charger. Do not use solvents or abrasive cleaners.
• Storage: Store the charger in a cool, dry place away from direct sunlight and moisture when not in use.
• Firmware Updates: Periodically check the ToolkitRC official website for firmware updates. Updates can be performed via the USB-C port.
• Cooling Fan: Ensure the cooling fan vents are clear of obstructions to maintain optimal performance and prevent overheating. The charger features automated fan speed control to manage heat effectively.

9. Troubleshooting

• Charger not powering on: Ensure the AC or DC power cable is securely connected and the power source is active. Check for any blown fuses in the power supply or charger.
• Battery not charging: Verify that the battery is correctly connected to both the main and balance ports (if applicable). Double-check that the selected battery type, cell count, and charging parameters match the battery's specifications.
• Error message on display: Refer to the quick manual for specific error codes and their meanings. Common errors relate to incorrect battery settings, connection issues, or battery faults.
• Overheating: Ensure the charger is in a well-ventilated area and the cooling fan vents are not blocked. Reduce the charging current if the charger consistently overheats.
• Wireless charging not working (PRO version): Ensure your device is Qi-compatible and correctly placed on the wireless charging pad. Remove any thick cases that might interfere.

10. User Tips

• Battery Health: Regularly check your battery's internal resistance using the charger's display to monitor its health and performance.
• Synchronous Mode: For maximum power output, utilize the synchronous charging mode when charging compatible batteries, allowing for up to 700W total power.
• Firmware Updates: Keep your charger's firmware updated to ensure optimal performance, access new features, and benefit from bug fixes. Check the ToolkitRC website for the latest versions.
• Power Distribution: The charger features intelligent power distribution. When using both AC and DC inputs, or charging multiple batteries, the charger will optimize power allocation.

11. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official ToolkitRC website or contact your authorized dealer. Keep your proof of purchase for warranty claims.