BASEUS BS-CH013

Contents

Baseus 4-in-1 Car Jump Starter User Manual

Model: BS-CH013 | Brand: BASEUS

1. Introduction

The Baseus 4-in-1 Car Jump Starter is a versatile and essential tool for any vehicle owner. It integrates four critical functions into one compact device: a powerful car jump starter, a high-pressure tire inflator, a portable power bank for charging electronic devices, and an emergency LED light. This manual provides detailed instructions for safe and effective use of your device.

2. Safety Information

WARNING: Read all safety warnings and instructions before using this product. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

  • Always keep the device away from children.
  • Do not disassemble, modify, or attempt to repair the device yourself.
  • Use the device in a well-ventilated area.
  • Avoid exposing the device to extreme temperatures, direct sunlight, or moisture.
  • Do not short-circuit the battery clamps.
  • Disconnect the jump starter from the car battery within 30 seconds after successfully starting the vehicle.
  • When inflating, do not over-inflate tires. Always monitor the pressure.
  • Use only the accessories provided or recommended by the manufacturer.

3. Package Contents

Please check the package for the following items:

  • Baseus 4-in-1 Jump Starter Unit
  • Smart Battery Cable Clamps (Alligator Clips)
  • USB-A to USB-C Charging Cable
  • Air Tube
  • Various Air Nozzles (for car, motorcycle, bicycle, balls)
Baseus 4-in-1 Jump Starter and accessories
Image: Baseus 4-in-1 Jump Starter unit, smart battery clamps, and charging cable.
Air nozzles for various inflation needs
Image: Included air nozzles for different applications like car tires, bicycle tires, and balls.

4. Product Overview

The Baseus 4-in-1 Jump Starter features a sleek design with an intuitive interface.

Components and Controls:

  • LED Digital Display: Shows tire pressure, battery level, and output status.
  • Power Button: Turns the device on/off, starts/stops inflation.
  • Light Button: Activates and cycles through lighting modes.
  • Mode Button: Selects inflation modes (e.g., car, motorcycle, bicycle, ball).
  • '+' / '-' Buttons: Adjusts preset air pressure.
  • USB-A Output Port: For charging external devices.
  • USB-C Input/Output Port: For charging the jump starter and external devices.
  • EC5 Port: For connecting the smart battery cable clamps for jump starting.
  • Air Tube Connection Port: For attaching the air tube for inflation.
Front view of Baseus 4-in-1 Jump Starter with LED display and control buttons
Image: Front view showing the LED display and control buttons.
Side view of Baseus 4-in-1 Jump Starter showing ports
Image: Side view illustrating the USB, Type-C, and EC5 ports, along with the air tube connection.

5. Setup and Initial Use

5.1 Initial Charging

Before first use, fully charge the Baseus 4-in-1 Jump Starter. Connect the provided USB-A to USB-C charging cable to the device's USB-C port and a suitable USB power adapter (not included). The LED display will show the charging progress. Ensure the device is fully charged for optimal performance, especially for jump starting.

5.2 Checking Battery Level

Press the power button once to check the current battery level displayed on the LED screen. It is recommended to keep the device charged above 50% for reliable jump starting.

6. Operating Instructions

6.1 Jump Starting a Car

  1. Preparation: Ensure the jump starter is adequately charged. Press the power switch to turn on the product.
  2. Connect to Jump Starter: Plug the smart battery cable clamps into the EC5 port of the jump starter. The indicator on the clamps will flash red and green alternately, indicating it's ready.
  3. Connect the Clamps: Open the engine hood of your vehicle. Connect the red (+) clamp to the positive terminal of your car battery and the black (-) clamp to the negative terminal. Ensure the polarities are connected correctly to avoid damage.
  4. Start Your Car: Go back inside your car and start the engine.
  5. Disconnect: Once the car starts, immediately disconnect the clamps from the car battery, then from the jump starter.
Connecting smart battery clamps to car battery
Image: Proper connection of smart battery clamps to a car battery for jump starting.
Starting the car engine after connecting jump starter
Image: Pressing the start button in the car after the jump starter is connected.
Video: Demonstration of jump starting a car and inflating a tire using the Baseus 4-in-1 device.

6.2 Inflating Tires

  1. Connect the Air Tube: Connect the air tube to the inflation pump's port.
  2. Attach Nozzle: Choose an appropriate air nozzle for your item (car tire, motorcycle tire, bicycle tire, or ball) and securely attach it to the air tube.
  3. Connect to Valve: Connect the nozzle to the tire valve or item to be inflated. The LED screen will display the current pressure.
  4. Preset Air Pressure: Use the '+' and '-' buttons to set the desired air pressure.
  5. Start Inflation: Press the power button to begin inflation. The device will automatically stop once the preset pressure is reached. Press the button again to stop manually if needed.
Connecting air tube to the inflator
Image: Connecting the air tube to the Baseus inflator unit.
Setting desired tire pressure on LED display
Image: Adjusting the target air pressure using the '+' and '-' buttons on the device's display.
Tire inflation in progress
Image: The device actively inflating a car tire, showing the current pressure on the display.
Recommended pressure ranges for various items
Image: Recommended pressure ranges for car, motorcycle, bicycle tires, and balls.

6.3 Using as a Power Bank

The device can also serve as a portable power bank to charge your electronic devices.

  1. Connect your smartphone, tablet, or other USB-powered device to the USB-A or USB-C output port of the jump starter using a compatible charging cable.
  2. The device will automatically begin charging your connected device.
Baseus jump starter charging a smartphone and tablet
Image: The jump starter being used to charge a smartphone and a tablet in a car interior.

6.4 Using LED Lighting

The built-in LED lamp offers multiple lighting modes for various situations.

  1. Double-press the light button to cycle through the available lighting modes.
  2. The modes include:
    • Emergency Light Mode: Provides a steady, regular light for illumination.
    • SOS Mode: Flashes alternately to signal for help.
    • Strobe Light Mode: Emits an alarmingly bright, rapid flash to deter danger or attract attention.
Baseus jump starter used as an emergency light
Image: The jump starter illuminating a car engine bay at night.
Diagram of LED lighting modes: Emergency, SOS, Strobe
Image: Visual representation of the three LED lighting modes: Emergency, SOS, and Strobe.

7. Maintenance

  • Cleaning: Wipe the device with a dry, soft cloth. Do not use harsh chemicals or abrasive cleaners.
  • Storage: Store the jump starter in a cool, dry place, away from direct sunlight and moisture.
  • Charging: If the device is not used for an extended period, charge it every 3-6 months to maintain battery health.
  • Attachment Storage: Utilize the built-in storage for air nozzles and the air tube to keep them organized and prevent loss.
Built-in storage for air nozzles and tube
Image: The integrated storage compartment for air nozzles and the air tube, ensuring neatness and convenience.

8. Troubleshooting

ProblemPossible CauseSolution
Device not turning onLow battery or no chargeRecharge the device fully.
Car not startingIncorrect clamp connection (polarity)
Jump starter battery too low
Car battery severely damaged
Ensure clamps are connected to correct terminals (+ to +, - to -).
Recharge the jump starter.
Consult a professional mechanic.
Tire not inflatingAir tube not securely connected
Nozzle not properly attached to valve
Leak in tire or valve
Check and secure all connections.
Ensure nozzle is tightly screwed onto the valve.
Inspect tire and valve for damage.
External device not chargingCharging cable faulty
Device not compatible
Jump starter battery low
Try a different charging cable.
Check device's charging requirements.
Recharge the jump starter.

9. Specifications

FeatureDetail
Product NameBaseus Super Energy Series 4-in-1 Car Jump Starter
Model No.BS-CH013
ColorBlack
MaterialABS+Silica
Battery TypeLi-polymer battery
Battery Capacity6000mAh / 14.8V / 22.2Wh (4 cells * 1500mAh)
Rated Output Capacity3700 mAh
Input (USB-C)5V/2.4A
Output (USB-A)5V/2.4A (Max.)
Rated Power45W
Working Temperature35 ℃ (Max.)
Peak Current600 A
Voltage12 V
Conversion Rate85%~90%
External Testing CertificationCE, RoHS, FCC
Number Of Built-in Batteries4
Powerful Inflation150psi
Applicable Vehicles12V/4.0L gas cars & 12V/2.5L diesel cars
Dimensions (L x W x H)165mm x 104mm x 54mm
Safety ProtectionsOvervoltage, Undervoltage, Charge overheating, Charge low-temperature, Overcurrent, Over-discharge, Discharge overheating, Discharge low-temperature, Short circuit, Reverse polarity, Anti-reverse charging, Start-up timeout protection
Product dimensions and safety features
Image: Diagram showing product dimensions (165mm x 104mm x 54mm) and a list of 12 safety protections.
Icons representing 12 safety protections
Image: Icons illustrating the 12 safety protections, including overvoltage, undervoltage, overcurrent, short circuit, and reverse polarity protection.

10. User Tips

  • Vehicle Compatibility: While designed for 12V/4.0L gas and 12V/2.5L diesel cars, always verify your vehicle's battery voltage and engine displacement to ensure compatibility. For electric vehicles, consult your car's manual or a professional.
  • Pre-Charge for Emergencies: Always keep the jump starter fully charged, especially before long trips, to ensure it's ready for unexpected emergencies.
  • Familiarize with Lighting Modes: Practice cycling through the emergency, SOS, and strobe light modes in a non-emergency situation so you can quickly select the correct mode when needed.
  • Correct Nozzle Selection: Ensure you select and securely attach the appropriate air nozzle for the item you are inflating to prevent air leakage and achieve accurate pressure.

11. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the manufacturer's official website or contact their customer service department. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.