XSDTS DF14XF

Contents

XSDTS DF14XF Smart Door Lock Instruction Manual

Tuya APP Smart Life APP Control Voice Intercom Smart Lock with 3D Face Recognition, Fingerprint, Password, and Camera

1. Introduction

Thank you for choosing the XSDTS DF14XF Smart Door Lock. This advanced smart lock offers multiple unlocking methods including 3D face recognition, fingerprint, password, card, mobile app, and mechanical key. It integrates a 1MP infrared night vision HD camera, a 4.5-inch HD display, and supports Tuya APP for voice intercom and remote control. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance and security.

2. Product Components

Before installation, please verify that all components are present and in good condition.

Product list showing smart lock panels, lock body, lock core, keys, magnetic cards, charging cable, screw fittings, and instructions.

Figure 2.1: Product List

  • Front Panel * 1
  • Rear Panel * 1 (with built-in lithium battery)
  • Lock Body * 1
  • Lock Core * 1
  • Keys * 2
  • Magnetic Cards * 2
  • Charging Cable * 1
  • Screw Fittings (various sizes)
  • Instructions + Installation Drawings

3. Specifications

FeatureDetail
Brand NameXSDTS
Model NumberDF14XF
MainboardTongxin fully automatic lock solution
Fingerprint Module120120 imported FPC sensor, 500DPI resolution
Cat's Eye Module1MP infrared night vision HD camera + 4.5-inch HD display
MaterialAluminium Alloy die-casting
Dimensions76mm x 420mm
Surface TechnologySpray painting
ColorStarry gray
PanelIn-mold injection IML
MotorDongshunda high-torque fully automatic lock motor
Power SupplyBuilt-in Rechargeable 7.4V lithium battery (3200mAh)
Unlocking MethodsFace recognition, Fingerprint, Password, Card swiping, WeChat applet, Mobile App (Tuya), Mechanical key, Tuya intercom
Special FeaturesBuilt-in Doorbell, Built-in Camera, Built-in Peephole, Built-in Screen, Two-way Audio, Anti-pry alarm, One-key quick opening, Automatic locking
ConnectivityWiFi (Tuya Smart home platform)
Suitable for Mortise6068
Installation MethodDrilling installation
Fit Door Thickness40-150mm
Suitable Door TypeSteel Door, Wooden Door, Brass Door, Stainless Steel Door, Other
Protection LevelNo Waterproof
Typical Quiescent Current<65μA
Total Users≤100 groups
Face Recognition Entries≤50 groups
Fingerprint Entries≤100 groups
Administrators9 groups
Ordinary Users≤100 groups
False Rejection Rate≤0.15%
False Acceptance Rate≤0.00004%
Operating Temperature-20℃~60℃
Relative Humidity20%~93%

4. Setup and Installation

Proper installation is crucial for the optimal performance and security of your smart lock. Please follow these steps carefully.

4.1 Preparation Before Installation

Before beginning installation, ensure you have the necessary tools and have chosen the correct screws based on your door's thickness.

Video 4.1: Installation Preparation Steps

  1. Choose Appropriate Screws: Select screws according to the thickness of your door.
  2. Secure Front Lock Stud: Screw the chosen screw onto the front lock stud.
  3. Tighten with Pliers: Use pliers to tighten the screw securely.
  4. Install Safety Strip: Install the safety strip on the deadbolt knob at the lower end of the rear lock.
  5. Insert Pin: Insert the pin in opposite directions.
  6. Bend and Fix Pin: Use needle-nosed pliers to bend the pin and fix it in place.
  7. Check Latch Clearance: Turn the safety strip to ensure the latch does not hit the motor.

4.2 Cutting and Installing Accessories

This step involves preparing the lock core and square rod for proper fitment.

  1. Install Lock Core: Pass the lock core through the lock body gourd groove from the outside of the door, ensuring the keyhole faces the outside.
  2. Check Lock Tongue Rebound: Turn the lock core square bar and check if the lock tongue rebounds. If it rebounds, keep it still and tighten the lock core fixing screw.
  3. Mark and Cut Lock Core Strip: Mark the square strip of the lock core and cut it. Mark the 1.8cm-2cm position on the door surface. Use a cutting machine to remove the excess part.
  4. Install Square Rod: Insert the shorter part of the square rod into the square groove of the indoor lock body.
  5. Mark and Cut Square Rod: Mark the cutting point on the square rod, 1cm-1.5cm position from the door surface. Use a cutting machine or vise to trim off the excess.

4.3 Installing the Smart Lock

Once the components are prepared, proceed with the main lock installation.

  1. Install Front Lock and Power Cord: Install the front lock. Pass the power cord from outside the door into the door. Align the lock core hole with the lock core. Buckle the panel to the door surface.
  2. Insert Spring: Put the spring in the hole of the rear lock square rod.
  3. Connect Power Cords: Connect the front and rear lock power cords.
  4. Hide Excess Power Cord: Hide any excess power cord inside the door to prevent it from being crushed.
  5. Align Components: Align the square rod, lock core square bar, and safety bar slot. Close the panel.
  6. Check Handle Operation: Turn the rear lock handle to check if the lock opens and closes smoothly.
  7. Secure Panels: Place the bamboo screw into the rear lock screw hole. Measure the length of the bamboo screw according to the thickness of the door. Fit the door frame and mark it one centimeter shorter than the door frame. The safety strip should also be marked one centimeter shorter than the door frame. Use a vise to trim off the excess.
  8. Final Tightening: Use the cut bamboo screws to align with the screw tube and screw them in. When tightening the screws with tools, leave a certain degree of tightness.
  9. Adjust Alignment: Adjust the front lock and rear lock to be parallel to the door edge.
  10. Check Keyhole Alignment: Open the keyhole to check if the lock core is in the middle.
  11. Complete Tightening: Then tighten the upper and lower bamboo screws completely.
Diagram showing the smart lock installed on a door, highlighting its sleek design.

Figure 4.1: Installed Smart Lock

5. Operating Instructions

Your XSDTS DF14XF Smart Door Lock offers multiple convenient ways to unlock your door.

5.1 Unlocking Methods

  • 3D Face Recognition: The lock features infrared 3D recognition for fast identification of facial features (forehead, eyeball, ear, nose, chin, mouth). It works with makeup, hats, eyeglasses, and in both day and night conditions. Simply approach the lock for automatic waking and no-touch unlocking.
  • Fingerprint Unlock: Utilizes an AI Fingerprint Algorithm with a 99.9% success rate for instant recognition (≤0.5s). The sensor is wear-resistant, exceeding 1 million uses. Place your registered finger on the sensor for quick access.
  • Password Unlock: Enter your registered password on the keypad. The lock supports virtual passwords to prevent peeping, allowing you to enter random digits before or after your actual password.
  • Card Unlock: Present your registered magnetic card to the card reader area on the lock.
  • Mobile App Unlock (Tuya/Smart Life APP):
    • Remote Unlocking: Use the Tuya APP to remotely unlock the door from anywhere.
    • Active Intercom: The Tuya APP active intercom version allows you to actively check the camera status through the APP at any time without ringing the doorbell.
    • Two-way Audio: Engage in two-way audio communication via the built-in camera and peephole.
    • Temporary Password: Generate temporary passwords for guests or service providers directly from the app.
    • Intelligent Scene Linkage: Integrate with other smart home devices via the Tuya platform.
    • Doorbell Message Promotion: Receive notifications and messages from the doorbell directly on your app.
  • Mechanical Key: For emergency situations, a traditional mechanical key can be used to unlock the door. The lock core is a C Level Key Core with explosion protection.
Image showing the smart lock with 3D infrared face recognition and real-time video intercom via mobile app.

Figure 5.1: 3D Face Recognition and App Intercom

Image illustrating 3D infrared recognition working with various conditions like makeup, hats, eyeglasses, day, and night.

Figure 5.2: Infrared 3D Recognition Capabilities

Image demonstrating AI Fingerprint Algorithm with fast recognition and wear resistance.

Figure 5.3: AI Fingerprint Algorithm

Image showing the Tuya APP interface for active intercom, remote unlocking, and other smart features.

Figure 5.4: Tuya APP Features

5.2 Language Settings

The smart lock supports 9 languages for voice screen phonetic system and quick code switching.

Image displaying the smart lock supporting 9 languages including English, Portuguese, Arabic, Spanish, Thai, Vietnamese, Indonesian, Russian, and Chinese.

Figure 5.5: Multi-language Support

5.3 Security Features

  • Anti-Pry Alarm: The lock is equipped with an anti-pry alarm that triggers in case of tampering.
  • False Alarm Prevention: Designed to minimize false alarms.
  • Low Battery Alarm: Notifies you when the battery is low, ensuring you have time to recharge.
  • Electromagnetic Interference Prevention: Protects against illegal unlocking attempts via electromagnetic interference.
  • C Level Key Core: Provides enhanced security against picking and drilling.
  • Virtual Password: Enter random digits before or after your actual password to prevent others from guessing it.
  • One-Key Switch Locking Knob: Allows for quick manual locking from the inside.
Diagram illustrating multiple security features including anti-pry alarm, false alarm, low battery alarm, electromagnetic interference prevention, and one-key switch locking knob.

Figure 5.6: Multiple Alarms Under Abnormal Situations

6. Maintenance

To ensure the longevity and optimal performance of your XSDTS DF14XF Smart Door Lock, follow these maintenance guidelines:

  • Regular Cleaning: Wipe the lock's surface and fingerprint sensor with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals that could damage the finish or electronic components.
  • Battery Charging: The lock has a built-in rechargeable 7.4V 3200mAh lithium battery. Charge the battery when the low battery alarm is triggered. Use the provided charging cable.
  • Avoid Water Exposure: This product is not waterproof. Avoid exposing it to rain, excessive humidity, or direct water spray to prevent damage to internal electronics.
  • Check for Obstructions: Periodically check the lock mechanism and door frame for any obstructions that might hinder smooth operation.
  • Software Updates: If available, perform system card swiping to upgrade programs as instructed by the manufacturer to ensure the latest features and security patches.
  • Keyhole Access: Keep the mechanical keyhole clear of debris. In case of emergency, ensure the mechanical key can be inserted and turned smoothly.

7. Troubleshooting

Here are some common issues and their solutions:

ProblemPossible CauseSolution
Lock not respondingLow batteryCharge the built-in lithium battery using the provided charging cable.
Fingerprint not recognizedFingerprint sensor dirty; unregistered fingerprint; improper placementClean the sensor. Ensure the fingerprint is registered. Place your finger flat on the sensor. Try re-registering the fingerprint.
Face not recognizedObstruction (e.g., hair, mask); poor lighting; unregistered faceEnsure your face is clear and well-lit. Re-register your face if necessary.
Password not workingIncorrect password; keypad malfunctionDouble-check the password. Try using the virtual password feature. If issue persists, use another unlocking method or mechanical key.
Lock does not open/close smoothlyMisalignment during installation; obstruction in lock mechanismRe-check installation steps for alignment. Clear any debris from the lock body or door frame.
App connectivity issuesWiFi signal weak; incorrect app settings; lock not pairedEnsure strong WiFi signal. Check Tuya APP settings and re-pair the lock if needed.
Voice system not working or wrong languageLanguage settings incorrectAccess the lock's settings menu to change the voice screen phonetic system language.

8. User Tips

  • Door Handing: The lock features a reversible handle direction. Ensure it is set correctly for your door's opening direction (left or right).
  • Language Update: If you require the lock's voice system or display to be in a specific language (e.g., Hebrew), check the lock's settings or contact customer support for potential firmware updates or language pack availability.
  • Door Thickness: Always verify your door thickness (40-150mm supported) and choose the appropriate screws and adjust the square rod length during installation for a secure fit.

9. Warranty and Support

For any issues not covered in this manual, or for warranty claims, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

  • Manufacturer: XSDTS
  • Model: DF14XF
  • Origin: Mainland China

© 2024 XSDTS. All rights reserved.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.