Yeelight YLDD05YL

Contents

Yeelight LED Smart Strip 1S RGB Colorful WiFi Light Strip User Manual

Model: YLDD05YL

Introduction

The Yeelight LED Smart Strip 1S is a versatile RGB colorful light strip designed to enhance your home lighting experience. It offers 16 million colors, adjustable brightness, and smart control features, making it an ultimate tool for creating personalized ambiance. This light strip is Wi-Fi enabled and integrates seamlessly with popular smart home platforms like Apple HomeKit, Amazon Alexa, and Google Assistant.

What's in the Box

Please check the package contents to ensure all items are present:

  • Lightstrip (80 inches / 2 meters)
  • Data cable (60 inches)
  • Controller
  • Connector
  • Power cable
  • Adapter (plug type subject to sales territory standard)

Note: Lightstrip Plus Extension (40 inches each) needs to be purchased separately.

Diagram showing all components included in the Yeelight Lightstrip 1S package: lightstrip, data cable, controller, connector, power cable, and adapter.
Product components diagram. The extension strip is sold separately.

Setup Instructions

Follow these steps to install your Yeelight LED Smart Strip 1S:

  1. Prepare the Adapter: Plug the power cable into the adapter. Rotate by 45 degrees clockwise and snap into place.
  2. Clean Surface: Clean the installation surface thoroughly to ensure proper adhesion.
  3. Paste Lightstrip: Remove the adhesive tape from the back of the lightstrip and paste it firmly onto the desired surface.
  4. Connect Power: Connect the lightstrip to the power supply.
  5. Initial Operation: Tap the button on the controller to turn on the lightstrip. Tap again to turn it off. Press and hold the button to cycle through desired colors.
Diagram illustrating the setup steps: plugging into adapter, cleaning surface, pasting lightstrip, connecting power, and using the controller button.
Visual guide for lightstrip installation and basic control.

Extending the Lightstrip

To extend the lightstrip beyond 2 meters, you will need to purchase Yeelight Lightstrip Plus Extension strips. Match the end of the original lightstrip with the connection port of the extension strip and secure it with the fastener. Ensure each strip is tightly connected before mounting. The maximum extendable length is 10 meters.

Image showing how to connect an extension strip to the main Yeelight lightstrip.
Connecting an additional 1m extension strip.

Operating Instructions

Intelligent Control via Yeelight App

The Yeelight App allows for comprehensive control and automation of your light strip:

  1. Download App: Search for "Yeelight" in your app store or scan the QR code provided in the manual (refer to the User Manual PDF for QR code).
  2. Connect: Turn on the lightstrip. Open the Yeelight app and follow the on-screen prompts to connect your device.

Ensure your Wi-Fi network is available and has proper internet access.

Screenshots of the Yeelight smartphone app interface showing color selection, preset scenes like Sunrise, Sunset, Night Mode, Birthday Party, Movie, and Dating Night.
Yeelight App interface for color and scene selection.

Apple HomeKit Smart Control

To integrate with Apple HomeKit:

  1. Open Home App: On your iPhone or iPad, open the Home app.
  2. Add Accessory: Click the "+" button and follow the prompts to add an accessory. You can scan the QR code on the light strip's base or manually input the 8-digit code.

Important: Ensure your Wi-Fi network is available and connected to the internet. This product is not compatible with 5G Wi-Fi networks. iOS 9.0 or above is recommended for proper HomeKit compatibility. HomeKit codes are located under the controller's base and are required for resets.

Voice Control and Smart Home Integration

The Yeelight Smart Strip 1S works with:

  • Apple HomeKit
  • Amazon Alexa
  • Google Assistant
  • Mi Home

You can use voice commands to control your light strip, such as turning it on/off, changing colors, or adjusting brightness.

Image showing Google Home and Amazon Echo devices with text bubbles indicating voice commands for controlling the Aurora lightstrip.
Voice control integration with Google Assistant and Amazon Alexa.

Key Features and Functions

  • 16 Million Colors: Choose from a vast spectrum of colors to match any mood or occasion.
  • Brightness Dimming: Adjust brightness from 1% to 100%.
  • Customizable Schedules: Set time schedules and countdowns for automated lighting.
  • Music Sync: Sync your light strip with music for dynamic lighting effects.
  • Group Control: Control multiple Yeelight strips or other Yeelight products simultaneously.
  • Flexible Design: Made with mercury-free soft PU gel, allowing it to be bent and shaped to fit furniture and various surfaces.
  • One-Key Operation: Use the physical button on the controller to switch the lightstrip on/off or long-press to change colors, useful when your smartphone isn't readily available.

Maintenance

To ensure the longevity and optimal performance of your Yeelight LED Smart Strip 1S:

  • Cleaning: Gently wipe the light strip with a dry, soft cloth. Avoid using harsh chemicals or abrasive cleaners.
  • Regular Inspection: Periodically check the power cable, adapter, and the light strip itself for any signs of damage. If any part is damaged, discontinue use and replace it.
  • Storage: If storing the light strip for an extended period, ensure it is clean, dry, and stored in a cool, dark place.

Troubleshooting

How to Reset the Lightstrip

If you encounter connectivity issues or need to set up the lightstrip in a new network environment, perform a reset:

  1. Disconnect Power: Unplug the lightstrip from its power source.
  2. Press and Hold: While keeping the power button on the controller pressed, reconnect the lightstrip to the power supply.
  3. Observe Color Flow: Continue holding the button for five seconds until the lightstrip cycles through red, green, and blue, and then turns yellow.
  4. Release Button: Release the button. The reset is now complete.

Common Issues and Solutions

  • Lightstrip not turning on: Check power connections, ensure the adapter is properly plugged in, and verify the power outlet is functional.
  • Connectivity issues (Wi-Fi): Ensure your Wi-Fi network is 2.4GHz (5G networks are not supported). Check Wi-Fi signal strength. Try resetting the lightstrip as described above.
  • Inaccurate colors or dimming: Ensure the Yeelight app or smart home platform is updated to the latest version. Perform a reset if issues persist.
  • Physical damage: If the lightstrip, cable, or adapter is physically damaged, discontinue use immediately and replace the affected component or the entire unit.

Specifications

FeatureDetail
Model No.YLDD05YL
Communication ModeWi-Fi IEEE 802.11 b/g/n 2.4GHz
Color Adjustable16 Million Colors
Brightness1%-100%
Rated Power (2m)7.5W
Rated Power (10m)24W
Rate Input (2m)100-240V~50/60Hz 0.17A
Rate Input (10m)100-240V~50/60Hz 0.6A
Lifetime25000hrs
Platform SupportedAndroid 4.4 and above; iOS 9.0 and above
Operating Temperature-10°C to +40°C (10°F to 104°F)
Frequency Bands (Wi-Fi)2400MHz-2483.5MHz
Frequency Bands (BT)2402MHz-2480MHz
Maximum Output Power (WiFi)15.7 dBm
Maximum Output Power (BT)5.7 dBm
CertificationCE
Installation MethodSelf-contained
Smart DeviceYes
Power SourceAC
Luminous Flux249-2000

For a detailed overview of specifications, you can also refer to the official User Manual (PDF).

Warnings and Safety Information

Please read and adhere to the following warnings to ensure safe operation and prevent damage:

  • Voltage Check: Always check the voltage before using the product. Incorrect voltage can damage the product and pose safety hazards.
  • Indoor Use Only: This product is designed for indoor use only.
  • Operating Environment: To prevent premature product failure, install the lightstrip in an environment ranging between -10°C to +40°C (10°F to 104°F).
  • Not Waterproof: The lightstrip is not waterproof. Avoid exposure to water or high humidity.
  • Inspect for Damage: Regularly inspect the cable, power supply, and all other parts. Do not use the luminaire if any part is damaged.
  • Non-Replaceable Parts: The external flexible cable or cord of this luminaire cannot be replaced. Do not use the luminaire if the cable or cord is damaged. The lamps are not replaceable; the entire luminaire must be replaced when the light source reaches its end of life.
  • No Disassembly: Do not attempt to disassemble the product.
  • Child Safety: Keep the lightstrip away from children under 3 years old.
  • Maximum Length: The maximum interconnected length is 10 meters (400 inches).
  • Bending Limit: Do not bend the LEDs inside the lightstrip more than 90 degrees to prevent damage.
  • Power Connection: Do not connect the lightstrip to the power supply while it is still in its package.
  • Extension Compatibility: The Lightstrip Plus 1S is only compatible with Yeelight Lightstrip Plus Extension.
  • Connectors: Interconnection must only be made using the supplied connectors. Any open end must be sealed off before use.
  • Installation Restrictions: Do not use the rope light when covered or recessed into a surface. Do not open or cut the rope light.
  • RF Exposure: Under normal use, a separation distance of at least 20cm should be maintained between the antenna and the user's body.

Compliance Information

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

EU Declaration of Conformity

We, Qingdao Yeelink Information Technology Co., Ltd., hereby declare that this equipment is in compliance with the applicable Directives and European Norms, and amendments.

WEEE Disposal and Recycling

The symbol on the product indicates that it should not be disposed of with other household waste throughout the EU. To prevent potential harm to the environment or human health from uncontrolled waste disposal, please recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.

User Tips

  • Power Source: The Yeelight LED Smart Strip 1S is designed to be powered by an AC outlet using the provided adapter (100-240V~50/60Hz). It is not directly compatible with USB power sources, so avoid attempting to power it via a TV's USB port or similar.
  • Placement: The flexible design and adhesive backing make it ideal for indirect lighting. Consider placing it behind TVs, under sofas, around artwork, or under beds to create a soft, ambient glow.
  • Preset Scenes: Explore the preset scenes in the Yeelight app (e.g., Sunrise, Sunset, Night Mode, Birthday Party, Movie, Dating Night) for quick and easy atmosphere changes. You can also save your favorite custom settings.

Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official Yeelight website or contact your retailer. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.