Introduction
The LEKATO iG-10 Mini Guitar Amp is a 10W portable electric guitar amplifier designed for practice and small gigs. It features both clean and overdrive channels, adjustable reverb, Bluetooth connectivity for audio streaming, and a built-in rechargeable battery with USB-C charging. Its compact and lightweight design makes it an ideal companion for musicians on the go.
Product Overview: Controls and Interfaces
Familiarize yourself with the various controls and connection points on your LEKATO iG-10 Mini Guitar Amp.


Control Panel Functions:
- Guitar Input (1): 6.35mm jack used to connect your electric guitar audio cable.
- Power Switch/Guitar Volume (2): Rotate clockwise past 35 degrees to turn on the amplifier. Continue rotating clockwise to adjust the guitar's output volume. Rotate counter-clockwise to 30 degrees to turn off the unit.
- Power/Charging Indicator Light (3): Displays green when the amplifier is turned on. Shows red when the unit is charging. The red light turns off when the battery is fully charged.
- Mode Switch (4): Push the switch up for a clean tone. Press the switch down for an overdrive tone.
- Gain Knob (5): Adjusts the input gain level for your guitar signal.
- Tone Knob (6): Adjusts the guitar's tonal characteristics. Rotating clockwise enhances high frequencies, while rotating counter-clockwise enhances low frequencies.
- Bluetooth Switch (7): Long press to turn Bluetooth on or off. Tap briefly to play or pause Bluetooth music. Note that Bluetooth music volume is controlled by your source device, not the amplifier's volume knob (2).
- Reverb Knob (8): Adjusts the amount of reverb effect applied to the guitar channels.
Rear Panel Interfaces:
- Accompaniment Input (AUX IN) (9): 3.5mm socket used to connect external audio sources such as mobile phones, computers, MP3 players, or CD players for accompaniment. The volume of the AUX input is controlled by the source device, not the amplifier's volume knob (2).
- Earphone Interface (10): 3.5mm stereo socket. When headphones are inserted, the speaker output is automatically disconnected for private practice.
- Charging Input Port (11): USB Type-C port for charging the internal battery. Connect to a USB-5V power supply (e.g., mobile phone charger, computer, power bank). The charging indicator light (3) will be red during charging and turn off when fully charged.
Setup
1. Initial Charging
Before first use, or if the battery is low, charge the amplifier using the provided USB to Type-C charging cable. Connect the Type-C end to the Charging Input Port (11) on the amplifier and the USB-A end to a compatible USB-5V power source. The Power/Charging Indicator Light (3) will glow red during charging and turn off once fully charged. A full charge takes approximately 2 hours.

2. Powering On/Off
To turn on the amplifier, rotate the Power Switch/Guitar Volume knob (2) clockwise past the 35-degree mark. The Power/Charging Indicator Light (3) will turn green. To turn off, rotate the knob counter-clockwise to the 30-degree mark.
3. Connecting Your Guitar
Plug your electric guitar's audio cable into the Guitar Input (1) on the front panel.
4. Bluetooth Connection
To connect a Bluetooth device:
- Long press the Bluetooth Switch (7) to activate Bluetooth pairing mode.
- On your smartphone or other Bluetooth-enabled device, search for Bluetooth devices and select "10W AMP".
- Once connected, you can stream music wirelessly through the amplifier.

5. AUX Input Connection
To use an external audio source via AUX, connect a 3.5mm audio cable from your device (e.g., phone, MP3 player) to the Accompaniment Input (AUX IN) (9) on the rear panel.
Operating Instructions
1. Adjusting Guitar Volume
Rotate the Power Switch/Guitar Volume knob (2) to set the desired output volume for your guitar.
2. Selecting Tone Channel
Use the Mode Switch (4) to toggle between Clean and Overdrive tones. Push up for Clean, press down for Overdrive.

3. Fine-Tuning Your Sound
- Gain Knob (5): Adjust for more or less distortion/sustain, especially in Overdrive mode.
- Tone Knob (6): Sculpt your sound by adjusting the balance of high and low frequencies.
- Reverb Knob (8): Add depth and space to your guitar sound by increasing the reverb effect.
4. Playing with Accompaniment
When using Bluetooth or AUX IN, the volume of the accompaniment track is controlled by your source device (smartphone, MP3 player, etc.). Adjust the volume on your external device accordingly.
5. Using Headphones
Plug your 3.5mm stereo headphones into the Earphone Interface (10) for silent practice. The amplifier's speakers will automatically mute.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the exterior of the amplifier. Do not use abrasive cleaners or solvents.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Recharge the unit when the battery is low. If storing for an extended period, charge the battery to about 50% every few months.
- Splash Resistance: The amplifier is IPX4 splash-resistant, meaning it can withstand splashes of water from any direction. Do not immerse the unit in water or expose it to heavy rain. Ensure all ports are dry before charging.
- Storage: Store the amplifier in a cool, dry place away from direct sunlight and extreme temperatures.
Troubleshooting
- No Sound from Guitar:
- Ensure the amplifier is powered on and the Power/Guitar Volume knob (2) is turned up.
- Check that your guitar cable is securely connected to both the guitar and the Guitar Input (1).
- Verify your guitar's volume knob is turned up.
- If headphones are plugged in, unplug them to enable speaker output.
- No Sound from Bluetooth/AUX:
- Ensure the amplifier is powered on.
- Check that your Bluetooth device is properly paired and connected, or that the AUX cable is securely plugged in.
- Adjust the volume on your source device (phone, MP3 player, etc.).
- Amplifier Not Charging:
- Ensure the Type-C cable is correctly inserted into the Charging Input Port (11) and the power source.
- Try a different USB-5V power adapter or USB port.
- Check the charging cable for any damage.
- Poor Sound Quality:
- Adjust the Gain (5), Tone (6), and Reverb (8) knobs to find your desired sound.
- Ensure your guitar cable is not faulty.
- If using Bluetooth, ensure your device is within the effective range (15M) and there are no significant obstructions.
Specifications
| Feature | Specification |
|---|---|
| Rated Power | 10W |
| Peak Power | 20W |
| Speaker Unit | Full frequency 1.75 inches * 5W x 2 |
| Frequency Response | 40Hz-16KHz |
| Signal to Noise Ratio (AUX) | 95dB |
| Signal to Noise Ratio (Instrument) | 80dB |
| Input Impedance (AUX) | 10 Kohm |
| Input Impedance (Instrument) | 1 Mohm |
| Charging Input | USB Type-C DC5V 1000mA |
| Charging Time | 2 hours |
| Battery | 3.7V 2000mA lithium battery |
| Battery Life | ≈ 4-6 hours |
| Bluetooth Version | V5.0 |
| Bluetooth Effective Distance | 15M |
| Headphone Output | 3.5mm socket (stereo) |
| AUX Input | 3.5mm socket |
| Instrument Input | 6.35mm socket |
| Effects | Clean sound, Overload (Overdrive), Reverb |
| Net Weight | 15oz / 435g |
| Gross Weight | 18oz / 505g |
| Packaging Volume | 6.3 x 4.13 x 4.33in / 160 x 105 x 110mm |
| Batteries Included | Yes |
| High-concerned chemical | None |
| Origin | Mainland China |
User Tips
No specific user tips from reviews or Q&A were provided for this product. However, general tips for mini guitar amps include:
- Experiment with the Gain, Tone, and Reverb knobs to discover a wide range of sounds.
- When practicing with headphones, remember to adjust the volume on your audio source for Bluetooth/AUX input, as the amp's volume knob only controls the guitar signal.
- For outdoor use, ensure the amp is protected from direct heavy rain, despite its splash-resistant rating.
Warranty and Support
For warranty information and technical support, please refer to the seller's policies or contact the manufacturer directly. Keep your proof of purchase for any warranty claims.
Package Contents
- 1 x LEKATO iG-10 Mini Guitar Amp
- 1 x USB to Type-C Charging Cable
- 1 x User Manual
Note: Phone, guitar, and bass shown in promotional images are not included.