FANTECH WGP15 V2 Wireless Gamepad User Manual

1. Introduction

Thank you for purchasing the FANTECH WGP15 V2 Wireless Gamepad. This multi-platform controller is designed to enhance your gaming experience across various devices, including PC, Nintendo Switch, Android, and iOS. Featuring Hall-Effect joysticks and triggers, RGB lighting, and a 1000Hz polling rate, the WGP15 V2 offers precision, responsiveness, and versatility. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure you get the most out of your new gamepad.

FANTECH WGP15 V2 EOS PRO II Multi-Platform Wireless Controller. Highlights Tri-Mode Connectivity, Mechanical Face Buttons, Replaceable Thumbsticks, and Hall-Effect Sticks & Triggers.

2. Package Contents

Please check the box for the following items:

• 1x FANTECH WGP15 V2 EOS PRO II Gamepad
• 1x Warranty Card
• 1x Thank You Letter
• 1x Quick Start Guide
• 2x Replaceable D-Pads
• 1x Set of Replaceable Thumbsticks
• 1x USB-C Data Cable
• 3x Sets of Precision Aim Rings
• 1x USB Receiver (Dongle)

What's in the Box: FANTECH WGP15 V2 Gamepad and accessories.

3. Setup and Connectivity

The FANTECH WGP15 V2 supports three connectivity modes: Wired, 2.4GHz Wireless (via USB dongle), and Bluetooth (BT 5.0). Choose the mode that best suits your device and preference.

3.1. Tri-Mode Connectivity Overview

Tri-Mode Connectivity: Wired, 2.4G Wireless, and Bluetooth.

• Wired Mode: Perfect for stable setup and charging. Connect the USB-C data cable directly to your device.
• 2.4G Strikespeed Wireless: Ideal for minimalism and low-latency gaming. Use the included USB receiver (dongle).
• Bluetooth (BT) Mode: For easy experience and broad compatibility with mobile devices.

3.2. Initial Charging

Before first use, fully charge the gamepad using the provided USB-C data cable. Connect the USB-C end to the gamepad's charging port and the USB-A end to a power source (e.g., PC, USB wall adapter). The charging port is located on the top edge of the controller.

USB-C Charging Port and Built-in 3.5mm Audio Port.

3.3. Connecting to Devices

3.3.1. Wired Connection (PC/Switch)

1. Connect the USB-C end of the data cable to the gamepad.
2. Connect the USB-A end of the data cable to an available USB port on your PC or Nintendo Switch dock.
3. The gamepad should be automatically recognized and ready for use.

3.3.2. 2.4GHz Wireless Connection (PC/Android TV/Tesla)

1. Insert the USB receiver (dongle) into an available USB port on your PC, Android TV, or Tesla vehicle.
2. Turn on the gamepad. It should automatically pair with the receiver.
3. The gamepad's indicator lights will confirm a successful connection.

3.3.3. Bluetooth Connection (Switch/Android/iOS/MacOS)

1. Ensure the gamepad is powered on and in Bluetooth pairing mode (refer to the Quick Start Guide for specific button combinations, usually holding a specific button for a few seconds).
2. On your device (Switch, Android phone/tablet, iOS device, Mac), go to Bluetooth settings.
3. Search for available devices and select "FANTECH WGP15 V2" (or similar name) to pair.
4. Once paired, the gamepad's indicator lights will confirm the connection.

4. Operating Instructions

The FANTECH WGP15 V2 is designed for intuitive control and enhanced gaming performance.

4.1. Key Features and Controls

• Hall-Effect Joysticks & Triggers: Provides ultra-precise, anti-drift input for superior accuracy and durability.
• RGB Lighting: Joysticks feature vibrant RGB lighting for a personalized gaming aesthetic.
• Mechanical Face Buttons & D-Pad: Offers tactile feedback and quick response.
• Replaceable Thumbsticks & D-Pads: Customize your controller feel with different sizes and styles.
• Adjustable 4-Level Vibration: Personalize haptic feedback intensity for immersive gameplay.
• Built-in Highly Sensitive Gyroscope: Detects motion, tilt, and rotation for intuitive and dynamic gaming, especially useful for Switch titles.
• Mappable Rear Paddles: Customize functions to gain shortcuts and dominate in-game reactions.
• Turbo Function: Enables rapid firing for specific buttons (refer to Quick Start Guide for activation).
• Macro Buttons: 12 macro buttons available for advanced customization.
• 3.5mm Audio Port: Connect your headset directly to the controller for in-game audio and communication.

Key features including responsive triggers, anti-drift Hall-Effect thumbsticks, and mappable rear paddles.

Advanced features like RGB lighting, 1000Hz polling rate, and macro recording for perfect combos.

4.2. Customization

• Interchangeable Components: Easily swap out thumbsticks and D-pads to find your preferred ergonomic and control style.
• Rear Paddle Mapping: Utilize the mappable rear paddles for quick access to complex commands or frequently used buttons. Consult the Quick Start Guide for instructions on how to program these paddles.
• Vibration Adjustment: Adjust the vibration intensity through the controller's settings or companion software (if available) to match your comfort level.

5. Maintenance and Care

Proper care will extend the life and performance of your FANTECH WGP15 V2 Gamepad.

• Cleaning: Use a soft, dry cloth to wipe down the controller. For stubborn dirt, a slightly damp cloth with mild soap can be used, ensuring no liquid enters openings. Avoid harsh chemicals or abrasive materials.
• Storage: Store the gamepad in a cool, dry place away from direct sunlight and extreme temperatures.
• Battery Care: To maintain battery health, avoid fully discharging the battery frequently. If storing for an extended period, charge the battery to about 50% every few months.
• Cable Management: Avoid sharp bends or kinks in the USB-C data cable to prevent damage.
• Component Replacement: When replacing thumbsticks or D-pads, handle them gently to avoid damaging the internal mechanisms.

6. Troubleshooting

If you encounter issues with your gamepad, try the following solutions:

• Gamepad not connecting:
  • Ensure the gamepad is charged.
  • Verify the correct connectivity mode (Wired, 2.4G, Bluetooth) is selected and properly initiated.
  • For 2.4G, ensure the USB receiver is securely plugged in.
  • For Bluetooth, ensure your device's Bluetooth is enabled and the gamepad is in pairing mode. Try unpairing and re-pairing.
  • Try connecting the gamepad via USB-C cable to see if it functions in wired mode.
• Input lag or dropped connections (Wireless):
  • Ensure there are no obstructions between the gamepad and the receiver/device.
  • Move closer to the receiver/device.
  • Minimize interference from other wireless devices (Wi-Fi routers, other Bluetooth devices).
  • Ensure the gamepad's battery is not critically low.
• Joysticks or triggers drifting:
  • The WGP15 V2 uses Hall-Effect sensors, which are highly resistant to drift. If drift occurs, ensure the gamepad's firmware is up to date (check FANTECH's official website for updates).
  • Try recalibrating the joysticks through your device's controller settings (e.g., Nintendo Switch controller calibration, Windows Game Controller settings).
• Buttons not responding:
  • Ensure the gamepad is properly connected.
  • Test the buttons in different games or a controller test utility.
  • Check for any physical obstructions or debris under the buttons.
• Vibration not working:
  • Ensure vibration is enabled in the game or system settings.
  • Check the gamepad's vibration intensity settings.

7. Technical Specifications

Detailed technical specifications and dimensions of the FANTECH WGP15 V2 Gamepad.

8. User Tips

Maximize your gaming experience with these helpful tips:

• Experiment with Thumbsticks and D-Pads: The interchangeable components allow for significant customization. Try different combinations to find what feels most comfortable and precise for your playstyle.
• Utilize Rear Paddles: Map frequently used actions or complex combos to the rear paddles for a competitive edge. This can significantly improve reaction times in fast-paced games.
• Keep Firmware Updated: Periodically check the FANTECH official website for any firmware updates. Updates can improve performance, add new features, or fix bugs.
• Optimize Polling Rate: The 1000Hz polling rate ensures minimal input delay. For competitive gaming, ensure you are using a wired or 2.4G wireless connection to fully leverage this feature.
• Gyroscope for Immersion: For compatible games, especially on Nintendo Switch, utilize the built-in gyroscope for an added layer of immersion and control.

9. Warranty and Support

FANTECH products are built with quality and reliability in mind. For warranty information, technical support, or service inquiries, please refer to the Warranty Card included in your package or visit the official FANTECH website. Keep your proof of purchase for any warranty claims.

For further assistance, you may also contact FANTECH customer support through their official channels.