QCY Crossky C30S

Contents

QCY Crossky C30S Open Ear Clip-On Earbuds User Manual

Model: Crossky C30S

1. Product Overview

The QCY Crossky C30S are open-ear clip-on earbuds designed for comfortable and immersive listening. They feature Hi-Res Audio with LDAC codec, Bluetooth 6.0 for stable connection, and a long battery life. The open-ear design allows you to stay aware of your surroundings while enjoying your audio.

QCY Crossky C30S Earbuds and Charging Case
QCY Crossky C30S Earbuds and Charging Case

Package Contents

  • Earbuds × 1 pair
  • Charging case × 1
  • User Manual × 1 set
  • Type-C charging cable × 1
Contents of the QCY Crossky C30S box
What's in the Box: Earbuds, Charging Case, User Manual, Type-C Charging Cable

2. Getting Started

2.1 Charging the Earbuds and Case

Before first use, ensure the earbuds and charging case are fully charged.

  • Earbuds Charging: Place the earbuds into the charging case. The red LED on the earbuds will glow solid while charging and turn off once fully charged.
  • Case Charging: Connect the Type-C charging cable to the charging port on the case and a power source. The white LED on the case will blink while charging and glow solid white when fully charged.

Note: A full charge for the case takes approximately 2 hours.

2.2 Wearing Instructions

For optimal sound and comfort, follow these steps:

  1. Gently place the earbud over your auricle (outer ear) and slide it down to the middle-lower position. Adjust until it feels comfortable and secure.
  2. Adjust the angle of the earbud so that the sound hole is vertically aligned with your ear canal.

Improper wear may affect call quality and listening experience.

Diagram showing how to properly wear the QCY Crossky C30S earbuds
Proper wearing technique for the earbuds

2.3 First-Time Pairing

  1. Pick up both earbuds from the charging case. Remove the isolation films from the earbuds.
  2. Place both earbuds back into the charging case to activate them.
  3. Take both earbuds out of the charging case again. They will automatically enter pairing mode.
  4. On your smartphone, open Bluetooth settings and search for "QCY Crossky C30S". Tap to connect.

2.4 Multi-Point Connection

To connect your earbuds to two devices simultaneously:

  1. Ensure earbuds are powered on and in pairing mode. Connect them to Device A (e.g., your phone).
  2. Once connected to Device A, turn off Bluetooth on Device A. The earbuds will re-enter pairing mode.
  3. On Device B (e.g., your laptop), open Bluetooth settings and connect to "QCY Crossky C30S".
  4. Turn on Bluetooth on Device A and tap on "QCY Crossky C30S" in the paired devices list. The earbuds are now connected to both Device A and Device B.

3. Operating Instructions

3.1 Basic Controls

The earbuds feature touch-sensitive panels for easy control:

Action Gesture
Power On Open charging case lid and take out earbuds, or long press touch panel for 1.5s (if earbuds are outside the case).
Power Off Place earbuds back into the charging case.
Play/Pause Double touch either earbud's panel.
Next Track Triple touch the right earbud's panel.
Answer/End Call Double touch either earbud's panel.
Reject Call Long press either earbud's panel for 1.5s.
Activate Voice Assistant Triple touch the left earbud's panel.
Diagram of earbud touch controls
Earbud Touch Controls

3.2 QCY App Integration

Download the official QCY app to unlock advanced features and customize your listening experience. The app allows you to:

  • Adjust EQ settings.
  • Customize touch controls (e.g., set triple touch for previous track or gaming mode).
  • Enable or disable LDAC codec for higher audio quality (LDAC is disabled by default).
  • Access 360° Spatial Sound settings.
QCY App interface on a smartphone
Customize settings via the QCY App

4. Maintenance and Safety

4.1 General Maintenance

  • If the product is not used for an extended period (more than 2 weeks), please recharge it to maintain battery health.
  • Do not use oil or other volatile liquids to clean the product. Use a soft, dry cloth.

4.2 Safety Precautions

  • Do not disassemble or modify the battery, insert foreign objects, expose it to high temperatures, or immerse it in water or other liquids to prevent battery leakage, overheating, ignition, or explosion. Battery replacement should only be done by the manufacturer.
  • Do not drop, crush, or puncture the battery. Prevent external pressure that may lead to internal short circuits and overheating.
  • Do not dismantle or modify the earbuds for any reason, as it may result in fire, electronic breakdown, or permanent damage to the product.
  • Do not expose the product to extremely low or high temperatures (below 0°C or above 45°C).
  • Do not use the product indicator light near the eyes of children or animals.
  • Do not use the product during thunderstorms, as it may cause abnormal operation and increase the risk of electric shock.
  • Prolonged use of earbuds at high volume may cause hearing damage. Please manage your listening time and volume responsibly.

Environmental Protection Use Period:

Under normal use conditions, the environmental protection use period for this product is 10 years. During this period, the product will not leak any hazardous substances. This product can be recycled and must be disposed of according to local regulations.

5. Troubleshooting (FAQ)

  • Only one earbud has sound: Place both earbuds back into the charging case, close the lid, then take them out again. If the issue persists, perform a factory reset.
  • Phone shows "unable to connect": Delete the pairing record for "QCY Crossky C30S" from your phone's Bluetooth settings, then search and pair again.
  • No sound during music/calls: For Android phones, check the Bluetooth settings for "QCY Crossky C30S" and ensure "Phone audio" and "Media audio" are enabled. If still no sound, re-pair the earbuds with your phone.
  • Video/game audio delay: Audio delay can occur due to environmental factors, network conditions, or phone codec issues. Ensure you are using Bluetooth 6.0 for optimal performance. The earbuds feature ultra-low 60ms latency for gaming.
  • Audio stuttering/disconnection: Interference from strong Wi-Fi, 5G/4G signals, or high-power electrical appliances nearby can cause stuttering. Try moving to a different environment or re-pairing the earbuds.

5.1 Factory Reset

If you experience persistent connection issues, perform a factory reset:

  1. Disconnect the earbuds from your device's Bluetooth settings.
  2. Take both earbuds out of the charging case.
  3. Within 30 seconds, touch both earbud panels 5 times. The earbuds' white LEDs will flash 5 times, indicating a successful reset.
  4. After the reset, follow the "First-Time Pairing" steps to reconnect.

6. Specifications

Feature Specification
Product Name QCY Crossky C30S
Type Open Ear Clip-On Earbuds
Driver φ10.8mm Dual-Magnet Driver
Audio Codec LDAC/SBC
Call Noise Cancellation Dual-mic ENC Call
Bluetooth Version Bluetooth 6.0
Maximum Wireless Range 10m-20m (Effective Bluetooth Range: 10m)
Earbud Battery Capacity 32mAh (single earbud)
Charging Case Battery Capacity 460mAh
Single Playtime 6 hours
Total Battery Life (with case) Up to 40 hours
Charging Port USB Type-C
Cable Charge Time 2 hours
Waterproof Rating IPX5
Weight 5g (single earbud)
Charging Case Dimensions 66.0*49.0*25.6mm
Earbud Dimensions 29.0*26.0*15.7mm
Material PC, ABS
Features Waterproof, Dual Connection, Playback Control
Support APP Yes
Detailed specifications and dimensions of QCY Crossky C30S
Detailed Product Specifications

7. Warranty and Support

7.1 Manufacturer's Warranty

Your QCY product is covered by a one-year limited manufacturer warranty from the date of delivery. Please retain your purchase receipt. If any defects occur due to quality issues within the warranty period, please contact your authorized dealer for complimentary replacement or repair services.

Warranty Exclusions: The manufacturer's warranty is void under the following circumstances, but not limited to:

  • Improper or inadequate maintenance or modification.
  • Accident, misuse, abuse, contamination, or other external causes.
  • The use of unspecified adapter and accessories.
  • Malfunctions or damages resulting from natural disasters, earthquakes, lightning, abnormal voltage, or environmental factors.
  • Damages that occur as a result of failure to follow the instructions in this manual.

7.2 Support Information

For after-sales service and support, please contact:

Manufacturer: Dongguan Hele Electronics Co., Ltd.

Address: No. 325 Yuehui Rd. Daojiao Town Dongguan City Guangdong Province China

A user manual in PDF format is available for download from the manufacturer's website.

8. User Tips

  • Optimize Audio Quality: Remember that LDAC is disabled by default. For the best audio experience, enable LDAC through the QCY app.
  • App Customization: Explore the QCY app to personalize your EQ settings and touch controls to match your preferences.
  • Stay Aware: The open-ear design is great for outdoor activities. Ensure the earbuds are worn correctly to maximize awareness of your surroundings.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.