Lekato RCK.889X3/RCK.889X6

Contents

Lekato RCK.889X3/X6 Pancake Patch Cables User Manual

Ultra-Low Profile, Gold Plated 1/4" Right Angle Cables for Guitar Effect Pedals

1. Introduction

The Lekato RCK.889X3/X6 Pancake Patch Cables are designed for connecting guitar effect pedals, microphones, amplifiers, mixing consoles, and other audio equipment. These cables feature a heavy-duty, ultra-low profile pancake design with high-end gold plating for increased conductivity and tarnish resistance. Their compact design helps save valuable space on your pedalboard, contributing to a tidy and professional setup.

2. Setup and Connection

These patch cables are engineered for easy integration into your audio setup, particularly pedalboards.

  1. Identify Connections: Locate the 1/4-inch (6.35mm) input and output jacks on your guitar effect pedals or other audio equipment.
  2. Connect Cables: Insert one right-angle 1/4-inch plug into the output jack of the first pedal and the other right-angle plug into the input jack of the next pedal in your signal chain. The low-profile design allows for close placement of pedals.
  3. Adjust Pedal Placement: The flexible yet durable nature of these cables allows you to easily fit and adjust pedals of different dimensions on the same vertical height or horizontal position, optimizing your pedalboard layout.
  4. Secure Connections: Ensure all plugs are fully inserted into their respective jacks to establish a solid connection and prevent signal loss.
Lekato patch cables connecting multiple guitar pedals on a wooden floor, demonstrating a compact setup.
Figure 2.1: Example of Lekato patch cables connecting multiple guitar pedals, showcasing a compact and organized setup.
Close-up of a Lekato patch cable connecting two guitar pedals, highlighting the low-profile right-angle design.
Figure 2.2: Detailed view of a patch cable connecting two pedals, illustrating the space-saving right-angle connectors.

3. Operating Principles

These cables are designed to deliver high-fidelity audio signals with minimal interference:

  • Signal Integrity: The cables feature an ultra-pure oxygen-free copper core, which ensures excellent signal transmission and minimizes signal degradation.
  • Noise Reduction: A high-density OFC 99% braided shield, combined with a low capacitance of only 38 Picofarads Per Foot, effectively rejects handling noise and external interference, ensuring a clean audio signal.
  • Durability: The cross-linked polyethylene dielectric is heat resistant, preventing shrinkage and maintaining cable integrity over time.

4. Maintenance

To ensure the longevity and optimal performance of your Lekato patch cables, follow these simple maintenance guidelines:

  • Cleaning: Wipe the cables and connectors with a soft, dry cloth to remove dust and grime. Avoid using harsh chemicals or abrasive materials.
  • Storage: When not in use, coil the cables loosely to prevent kinks and store them in a dry, cool place away from direct sunlight and extreme temperatures.
  • Inspect Connectors: Periodically check the gold-plated connectors for any signs of tarnish or damage. While gold plating is tarnish-resistant, proper care helps maintain optimal conductivity.
  • Avoid Strain: Do not pull on the cable itself when disconnecting; always grasp the connector housing. Avoid sharp bends or excessive tension on the cables.

5. Troubleshooting

If you experience issues with your audio signal, consider the following troubleshooting steps:

  • No Signal:
    • Ensure all cables are securely plugged into their respective input and output jacks.
    • Check that all connected devices (pedals, amplifier, instrument) are powered on and functioning correctly.
    • Test each cable individually by swapping it with a known working cable to identify if a specific cable is faulty.
  • Intermittent Signal or Noise:
    • Verify that the connectors are clean and free of debris.
    • Ensure the cables are not excessively bent or kinked, which can damage internal wiring.
    • Check for any loose connections at the pedal jacks or cable plugs.
    • Minimize electromagnetic interference by keeping cables away from power supplies or other high-current devices where possible.

6. Specifications

FeatureSpecification
Length2.36 inches / 6 cm (cable length between connectors)
Plug Diameter1/4-inch / 6.35mm
Connector TypeRight Angle, Pancake Style
Connector PlatingGold Plated
Cable TypeShielded Multiconductor
Core MaterialOxygen-Free Copper Wire (OFC)
ShieldingHigh-density OFC 99% braided shield
Capacitance38 Picofarads Per Foot
Jacket MaterialPVC
Outer Diameter (OD)OD4.0 x 2 (mm)
Dielectric MaterialCross-linked polyethylene (heat resistant)
Main PurposesAudio, musical instruments, engineering, information transmission
CertificationsFCC, CE, CQGC
Material (Connectors)ABS, Metal
Package Options3-Pack or 6-Pack
Diagram showing the overall dimensions of a Lekato patch cable, with a total length of 12cm (4.72 inches) and a cable segment length of 5.5cm (2.17 inches).
Figure 6.1: Overall cable dimensions.
Diagram showing the dimensions of the Lekato patch cable connector, with a width of 2cm (0.79 inches), height of 3cm (1.18 inches), and thickness of 0.5cm (0.2 inches).
Figure 6.2: Connector dimensions.

7. User Tips

  • Pedalboard Optimization: Utilize the ultra-low profile and right-angle design to maximize space on your pedalboard, allowing for more effects or a more compact setup.
  • Signal Chain Planning: Plan your pedal signal chain carefully to ensure optimal sound quality. These cables are designed to maintain signal integrity across your chain.
  • Cable Management: Even with short patch cables, good cable management can prevent tangles and accidental disconnections during performances or practice.

8. Warranty and Support

For any questions regarding product performance, technical support, or warranty claims, please contact the manufacturer or your point of purchase. Keep your purchase receipt as proof of purchase.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.