LEKATO WS-60

Contents

LEKATO WS-60 Wireless Guitar System User Manual

6-Channel Zero Interference Wireless Guitar System

1. Introduction

The LEKATO WS-60 is a high-performance 6-channel wireless guitar system designed for musicians seeking freedom from cables without compromising sound quality. It features 24bit/48KHz stereo lossless digital transmission, ultra-low latency, and a robust 2.4GHz signal, making it ideal for live performances, studio recording, and practice sessions. Its versatile design supports both mono and stereo instruments, offering broad compatibility with various audio equipment.

2. Package Contents

Please check the box for the following items:

  • 1 x LEKATO WS-60 Wireless Transmitter
  • 1 x LEKATO WS-60 Wireless Receiver
  • 1 x USB Charging Cable (double-ended)
  • 1 x User Manual

3. Product Overview

The LEKATO WS-60 system consists of a transmitter and a receiver, both designed for ease of use and maximum compatibility.

LEKATO WS-60 Transmitter and Receiver with connector types

Figure 1: Transmitter and Receiver with Connector Types
The transmitter connects to your instrument, and the receiver connects to your amplifier or audio interface. Both units feature 6.35mm (1/4 inch) and 3.5mm (1/8 inch) connectors for broad compatibility.

LEKATO WS-60 Rotatable Design and Controls

Figure 2: Rotatable Design and Controls
The units feature a 280° rotatable head for flexible positioning. Controls include a USB charging port, a channel switch button, and an On/Off switch.

LEKATO WS-60 1/4 inch and 1/8 inch connectors

Figure 3: 1/4" & 1/8" 2-in-1 Connectors
The system supports both mono and stereo musical instruments with its versatile 1/4 inch and 1/8 inch connectors.

4. Specifications

FeatureSpecification
Model NumberWS-60
Audio Response Range20Hz-20kHz
FrequencyUHF, 2.4G ISM Worldwide
Transmission RangeMax. 50M (No obstacle); 30M (through-wall)
Transmission Delay< 12 ms
Power SupplyBuilt-in 3.7V 600mAh rechargeable lithium battery
Charge PortMicro USB
Working Time Per ChargeUp to 5 hours
Channels6 Channels
Item Size (each unit)11 x 4.5 x 1.5 cm (4.3 x 1.8 x 0.6 in)
Item Weight (each unit)35g (1.2 oz)
Total Weight (package)150g
Dimensions (package)6 x 3.9 x 1.7 inches
Suitable ForElectric Guitar, Keyboard, Mixer, Camera, Bass, Keytar, Mandolin, Synthesizer, etc.

5. Setup

5.1 Charging the Units

  • Before first use, fully charge both the transmitter and receiver.
  • Connect the included double-ended USB charging cable to both units and a USB power adapter (not included).
  • A full charge takes approximately 1.5 hours and provides up to 5 hours of continuous use.

5.2 Connecting to Instruments and Audio Devices

  • Transmitter: Plug the transmitter into your instrument's output jack (e.g., electric guitar, bass, keyboard). Use the appropriate 6.35mm (1/4 inch) mono or 3.5mm (1/8 inch) stereo connector as needed.
  • Receiver: Plug the receiver into the input of your amplifier, mixer, audio interface, or camera. Use the appropriate 6.35mm (1/4 inch) mono or 3.5mm (1/8 inch) stereo connector.
  • The 280° rotatable head allows for optimal positioning on various instruments and devices.

5.3 Pairing the Units

  • Turn on both the transmitter and receiver using their respective On/Off switches.
  • Long press the 'Pair' or 'Signal' button on both the transmitter and receiver simultaneously. The indicator lights will flash, then turn solid when successfully paired. No further operation is required for pairing.
  • The system supports 6 channels. If you experience interference, press the 'Channel switch button' on both units to cycle through available channels until a clear signal is found. Ensure both units are on the same channel.

6. Operating Instructions

6.1 Power On/Off

  • To power on, press and hold the On/Off button until the indicator light illuminates.
  • To power off, press and hold the On/Off button until the indicator light turns off.

6.2 Channel Selection

  • The WS-60 supports up to 6 channels for simultaneous use of multiple systems.
  • To change the channel, briefly press the 'Channel switch button' on both the transmitter and receiver. Ensure both units are set to the same channel for proper operation.

6.3 Multi-Device Usage

  • The system allows one transmitter to send a signal to several receivers simultaneously, provided they are all on the same channel. This is useful for sending your instrument's signal to multiple amplifiers or recording devices.

7. Troubleshooting

  • No Sound or Intermittent Signal:
    • Ensure both transmitter and receiver are fully charged and powered on.
    • Verify that both units are paired and set to the same channel.
    • Check that the transmitter is securely plugged into your instrument and the receiver into your audio device.
    • Try switching to a different channel to avoid interference from other 2.4GHz devices (e.g., Wi-Fi routers, other wireless systems).
    • Ensure the distance between the transmitter and receiver is within the effective range (up to 100 feet outdoors, less through walls).
  • Unit Does Not Power On:
    • The battery might be completely drained. Switch the unit off and recharge it for 1-2 hours before attempting to power it on again.
  • Excessive Noise or Hum:
    • Move the units away from strong electromagnetic fields or other wireless equipment that might cause interference.
    • Ensure your instrument and amplifier are properly grounded.

8. Maintenance

  • Keep the units clean and dry. Avoid exposure to moisture, extreme temperatures, or direct sunlight.
  • Clean the exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Store the units in a safe place when not in use to prevent physical damage.
  • Regularly charge the lithium battery to maintain its health, even if the units are not used frequently.

9. User Tips

  • For optimal performance, ensure a clear line of sight between the transmitter and receiver, especially in crowded wireless environments.
  • Always fully charge both units before a performance or extended use to avoid unexpected power loss.
  • Experiment with different channels if you encounter any signal drops or interference, as local wireless traffic can vary.
  • Utilize the 280° rotatable head to position the units in a way that minimizes physical obstruction and maximizes signal strength.

10. Warranty and Support

LEKATO products are designed for reliability and performance. If you encounter any issues or have questions regarding your WS-60 Wireless Guitar System, please do not hesitate to contact our customer service team. We are committed to providing support and will respond to your inquiries within 24 hours.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.