Introduction
The Shimbol TP Nano is a compact and innovative wireless video transmission system designed for professional image transmission between cameras, cell phones, monitors, and projectors. Featuring a built-in 2000mAh battery, it offers up to 4 hours of continuous operation, freeing you from power cords. Its MagSafe compatibility allows for instant snap-on to compatible phones, making it ideal for mobile creators. With a 150m transmission range and ultra-low latency of 60ms, the TP Nano ensures cinema-grade clarity and reliable performance.
What's in the Box
The Shimbol TP Nano package includes the following components:
- 1x Shimbol TP Nano Transmitter (TX)
- 1x Shimbol TP Nano Receiver (RX)
- 1x HDMI Cable
- 1x Type-C to HDMI Cable
- 1x USB-A to Type-C Cable
- User Manual (this document)
Setup Guide
Follow these steps to set up your Shimbol TP Nano system for various applications.
Quick Start Video Guide
1. Camera to Monitor Setup
- TX Side Setup: Connect the HDMI cable to the TX unit's HDMI IN port. Then, connect the other end of the HDMI cable to your camera's HDMI output port.
- RX Side Setup: Connect an HDMI cable to the RX unit's HDMI OUT port. Then, connect the other end of the HDMI cable to your monitor's HDMI input port.
2. Action Camera to Monitor Setup
- TX Side Setup: Connect the TX unit (HDMI IN) to your action camera.
- RX Side Setup: Connect the RX unit (HDMI OUT) to your monitor.
3. Phone to Projector Setup
- TX Side Setup: Connect the TX unit (HDMI IN) to your phone. For iPhones (Pre-15 models), an HDMI-Lightning cable is required. The TP Nano is MagSafe compatible for easy attachment.
- RX Side Setup: Connect the RX unit (HDMI OUT) to your projector.
4. Phone to Screen Setup
- TX Side Setup: Connect the TX unit (HDMI IN) to your phone.
- RX Side Setup: Connect the RX unit (HDMI OUT) to your display screen.
- Screen Rotation: Short press the button on the RX side to rotate the screen display (portrait/landscape).
Operating Instructions
- Power On: Ensure both the TX (Transmitter) and RX (Receiver) units are powered on. The built-in 2000mAh battery provides approximately 4 hours of operation.
- Pairing:
- When pairing, the blue indicator light on both units will blink slowly.
- Once successfully paired, the blue indicator light will remain steady on.
- Re-pairing (if pairing fails):
- If pairing fails, hold and press the button on the RX side until the blue light flashes fast.
- Then, perform the same action on the TX side. Release both buttons to initiate re-pairing.
- Signal Transmission: Once paired, the display screen connected to the RX unit will show the video feed from the device connected to the TX unit.
Indicator Status
The LED indicators on the Shimbol TP Nano units provide important status information:
- Power On (TX/RX Side): Unit is powered on.
- Pairing: Blue light blinks slowly.
- Paired: Blue light is steady on.
- Re-pairing Mode: Blue light flashes fast (after holding the button).
Specifications
| Feature | Transmitter (TX) | Receiver (RX) |
|---|---|---|
| Brand Name | Shimbol | Shimbol |
| Model Number | TP Nano | TP Nano |
| Photography Accessories Type | Tools | |
| Electric | Yes | |
| Origin | Mainland China | |
| Signal Interface | HDMI input | HDMI output |
| Battery Life | ≥4 hours (Typical) | ≥4 hours (Typical) |
| Power Consumption | <2W (Typical) | <1.5W (Typical) |
| Battery Capacity | 2000mAh | 2000mAh |
| HDMI Input | 720P@50/60Hz, 1080I@50/60Hz, 1080P@24/25/30/50/60Hz | None |
| HDMI Output | None | 720P@50/60Hz, 1080P@24/25/30/50/60Hz |
| Weight | 88.26g | 88.26g |
| Dimensions | 70*62*20.5mm | 70*62*20.5mm |
| Transmission Frequency Band | 5GHz | 5GHz |
| Transmitting Power | 17dBm | None |
| Transmission Latency | As low as 60ms | |
| Receiving Sensitivity | None | -85dBm |
| Material | Plastic | |
Troubleshooting
If you encounter issues with your Shimbol TP Nano system, consider the following troubleshooting steps:
- Check Power & Pairing Status: Ensure both TX and RX units are powered on and the blue indicator lights are steady, indicating successful pairing. If not, attempt re-pairing as described in the Operating Instructions.
- Verify Signal Source & HDMI Cable: Confirm that the signal source (camera, phone) is active and outputting video. Check all HDMI cables for secure connections and ensure they are not damaged.
- Confirm Source Resolution: The system supports a maximum resolution of 1080P 60Hz. Ensure your source device is outputting a compatible resolution.
- Interference: The system operates on the 5GHz frequency band. If experiencing signal drops or instability, try to minimize interference from other 5GHz devices.
User Tips
- Optimal Placement: For best performance, ensure a clear line of sight between the TX and RX units and avoid placing them near large metal objects or other wireless devices that could cause interference.
- Battery Management: Fully charge both units before extended use to maximize the 4-hour battery life. Consider carrying a portable power bank for longer shoots.
- MagSafe Convenience: Utilize the MagSafe compatibility for quick and secure attachment to your iPhone, enhancing portability and ease of use for mobile content creation.
- Firmware Updates: Periodically check the Shimbol official website for any available firmware updates to ensure optimal performance and access to new features.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the exterior of the units. Avoid using liquid cleaners or solvents.
- Storage: When not in use, store the units in a cool, dry place, away from direct sunlight and extreme temperatures.
- Cable Care: Handle HDMI and Type-C cables with care to prevent bending or damage to the connectors.
Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official Shimbol website or contact their customer service department. Keep your proof of purchase for any warranty claims.
