1. Introduction
Thank you for choosing the VGR V-996 Professional Hair Clipper. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new hair clipper. Please read it thoroughly before first use and keep it for future reference.
Image 1.1: VGR V-996 Hair Clipper highlighting DLC Blade.
2. Product Features
- Professional Finishing Machine: Designed for precision and a flawless finish.
- Advanced DLC T-Blade: Durable DLC T-Blade for ultra-smooth cutting performance and minimized skin irritation.
- User-Friendly LED Display: Integrated LED display shows battery status and charging levels.
- Cordless Convenience & USB Interface: Cordless design with USB charging for flexible usage anywhere.
- Ceramic Blade with Oil Head: High-quality ceramic blade for longevity and sharpness, with an oil head for smooth operation.
Image 2.1: Visual representation of key product features.
3. Package Contents
Ensure all items are present and in good condition upon unpacking:
- 1 x VGR V-996 Hair Clipper Machine
- 4 x Limit Combs (1.5mm, 3mm, 4.5mm, 6mm)
- 1 x USB Charging Cable
- 1 x Cleaning Brush
- (Note: Due to air transport limitations, this product does not contain oil.)
Image 3.1: All included components of the VGR V-996 package.
4. Specifications
| Feature | Specification |
|---|---|
| Brand | VGR |
| Model | V-996 |
| Motor Speed | 7000 RPM |
| Battery Capacity | 2000mAh Lithium Battery |
| Charging Time | 3 Hours |
| Usage Time | 300 Minutes |
| Blade Material | DLC Coated Stainless Steel (Fixed), Ceramic (Moving) |
| Power Type | Mains and Battery Operation |
| Function | Charging Indication (LED Display) |
| Certification | CE, CCC |
Image 4.1: Battery and charging specifications, along with guide comb sizes.
5. Setup
- Unpack: Carefully remove all components from the packaging.
- Initial Charge: Before first use, fully charge the clipper for 3 hours using the provided USB charging cable. The LED display will indicate the charging status and battery percentage.
- Blade Inspection: Ensure the DLC T-Blade is clean and properly aligned.
- Attach Guide Comb (Optional): Select the desired limit comb (1.5mm, 3mm, 4.5mm, or 6mm) and securely attach it to the clipper head.
Video 5.1: Product demonstration showing the clipper's features and operation.
6. Operating Instructions
- Power On/Off: Press the power button to turn the clipper on or off. The LED display will illuminate when powered on.
- Adjusting Length: If using a guide comb, ensure it is securely attached. The clipper provides fixed lengths based on the comb used.
- Trimming:
- For best results, use on clean, dry hair.
- Hold the clipper with the blade flat against the skin or at the desired angle.
- Move the clipper slowly against the direction of hair growth.
- Use short, controlled strokes for precision.
- Monitoring Battery: The LED display shows the remaining battery percentage. Recharge when the battery level is low to avoid interruptions.
Image 6.1: Example of using the VGR V-996 clipper for grooming.
7. Maintenance and Care
- Cleaning the Blades:
- After each use, turn off the clipper and detach any guide comb.
- Use the provided cleaning brush to remove loose hairs from the blades.
- For a more thorough clean, the blades can be rinsed under running water (ensure the clipper body is not submerged). Dry thoroughly before reattaching.
- Oiling the Blades:
- Regularly apply a few drops of clipper oil (not included) to the blades to maintain sharpness and smooth operation.
- Turn on the clipper for a few seconds to distribute the oil evenly.
- Storage: Store the clipper in a cool, dry place, away from direct sunlight and moisture. Keep it out of reach of children.
Image 7.1: The VGR V-996 clipper and its cleaning accessories.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Clipper does not turn on. | Low battery or not charged. | Charge the clipper fully for 3 hours. |
| Blades pull hair or cut poorly. | Blades are dull, dirty, or not oiled. | Clean and oil the blades. If problem persists, blades may need replacement. |
| Clipper makes unusual noise. | Blades are not properly aligned or need oiling. | Check blade alignment and apply oil. |
9. User Tips
- To minimize skin irritation, always ensure the blades are clean and well-oiled before use.
- For optimal performance and battery longevity, avoid completely draining the battery before recharging.
- When trimming, use a mirror to ensure even cuts, especially for hard-to-reach areas.
- Experiment with different guide comb lengths to find the perfect style for your hair.
10. Warranty and Support
For any product-related inquiries, technical support, or warranty claims, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.
This product is certified with CE and CCC, ensuring it meets relevant safety and quality standards.
