1. Introduction
The LEKATO 5.8GHz Wireless XLR Microphone System is designed to provide convenient and secure wireless connectivity for dynamic microphones and audio equipment. This system offers freedom of movement and high-quality audio transmission, making it ideal for use with PA systems, audio mixers, and DSLR cameras. It operates on the 5.8GHz ISM frequency band, ensuring stable and interference-free performance.


2. Package Contents
Please check the package carefully to ensure all items are present:
- 1 x MW-1 Wireless Microphone Receiver
- 1 x MW-1 Wireless Microphone Transmitter
- 1 x Dual-end Rechargeable Power Cable
- 1 x User Manual
3. Product Overview
Familiarize yourself with the components of your LEKATO wireless system:

- XLR Interface: Connects to microphones (Transmitter) or audio equipment (Receiver).
- Paring Button: Used for initiating the pairing process and switching channels.
- Battery Indicator/Channel Indicator: Displays battery level and current channel.
- Power Switch: Turns the unit on or off.
- Micro-USB Port: For charging the built-in lithium battery.
- Status Indicator: Provides visual feedback on device status, including charging.
- Fastener Button (Transmitter only): Secures the transmitter to the microphone.
4. Specifications
| Feature | MW-1 Receiver | MW-1 Transmitter |
|---|---|---|
| Power Supply Mode | Built-in lithium battery | Built-in lithium battery |
| Cell Capacity | 3.7V 400mAh | 3.7V 400mAh |
| Reception Sensitivity | -85dBm | N/A |
| Transmission Power | N/A | 7dBm |
| Working/Received Frequency | 5.8GHz frequency | 5.8GHz frequency |
| Anti-jamming Method | Frequency hopping | Frequency hopping |
| Signal Distortion | <0.02% | N/A |
| Gain | 0 dB | N/A |
| SNR (Signal-to-Noise Ratio) | 105dB | N/A |
| Frequency Response | 20Hz-20KHz | 20Hz-20KHz |
| Delay Time | <5ms | <5ms |
| Sampling Rate | 24-bit / 48KHz | 24-bit / 48kHz |
| Output Impedance | 680Ω | N/A |
| Input Impedance | N/A | 3.3K |
| Port's Type | XLR male port | XLR female port |
| Transmission Range | ≥30M / 100ft | |
| Working Time (Fully Charged) | ≥5 hours | |

5. Setup Instructions
- Charge the Units: Before first use, fully charge both the transmitter and receiver using the provided dual-end USB charging cable. The status indicator will be red while charging and turn off when fully charged.
- Connect the Transmitter: Plug the MW-1 Wireless Microphone Transmitter (XLR female port) directly into your dynamic microphone's XLR output. Ensure it is securely fastened if your microphone has a compatible mechanism.
- Connect the Receiver: Plug the MW-1 Wireless Microphone Receiver (XLR male port) into the XLR input of your audio equipment (e.g., mixer, PA system, sound card, or DSLR camera with XLR input).
- Power On: Turn on both the transmitter and receiver using their respective power switches.
- Pairing: Long press the "Paring Button" on both the transmitter and receiver simultaneously. The units will automatically pair. The battery/channel indicators will show the connection status. The system supports 4 switchable channels, allowing up to 4 sets of receivers to be matched with the same transmitter simultaneously.
- Ready to Use: Once paired, the system is ready for use. "Just plug then you can play."
Note: This system is designed for dynamic/harmonic microphones and will not work with condenser microphones.



6. Operation
- Power On/Off: Use the power switch on each unit to turn them on or off.
- Checking Battery Level: When the unit is turned on, the battery/channel indicators will illuminate to show the current battery level. Each illuminated LED represents approximately 25% charge.
- Channel Switching: Briefly press the "Paring Button" on either the transmitter or receiver to cycle through the 4 available channels. Ensure both units are on the same channel for proper operation. This allows multiple sets to be used simultaneously without interference.
- Performance: The system provides stable and reliable wireless transmission with less than 5ms delay and a transmission range of up to 100ft (30M).


7. Maintenance and Charging
- Charging: Use the provided dual-end USB cable to charge both the transmitter and receiver simultaneously. Connect the cable to a standard USB power adapter (not included).
- Charging Indicators: While charging, the status indicator will be red. Once fully charged, the red status indicator will go off.
- Battery Life: A full charge provides over 5 hours of working time.
- Low Battery Warning: When the battery is low, the status indicator will start to flicker in red. Recharge the unit promptly to avoid interruption.
- Storage: Store the units in a cool, dry place when not in use. Avoid extreme temperatures and humidity.
- Cleaning: Wipe the units with a soft, dry cloth. Do not use liquid cleaners or solvents.

8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound or intermittent signal |
|
|
| Red status indicator flickering | Low battery | Recharge the unit immediately. |
| Units not charging |
|
|
9. User Tips
- Always fully charge both units before an important performance or recording session to ensure maximum operating time.
- For optimal signal quality, try to maintain a direct line of sight between the transmitter and receiver, especially in environments with many obstacles.
- If using multiple wireless systems in the same area, utilize the 4 available channels to prevent interference between units.
- Remember that this system is specifically designed for dynamic microphones. Using it with condenser microphones will not yield expected results.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the contact information provided by your retailer or visit the official LEKATO website. Keep your purchase receipt as proof of purchase.