1. Introduction
Thank you for choosing the LEKATO JA-02 II 5W Mini Guitar Amplifier. This portable and versatile amplifier is designed for guitarists who need a compact solution for practice, warm-ups, and jamming. Featuring 5W output, built-in distortion, Bluetooth connectivity for audio playback, and a headphone output for silent practice, the JA-02 II offers a rich set of features in a small package. Please read this manual carefully to ensure proper use and to maximize your experience with the amplifier.
2. Package Contents
Upon unpacking, please verify that all items listed below are included:
- 1 x LEKATO JA-02 II Mini Guitar Amplifier
- 1 x USB Charging Cable (Note: Power adapter not included)
3. Product Overview
Familiarize yourself with the amplifier's controls and ports:
- B.T. Button: Activates/deactivates Bluetooth mode.
- B.T./AUX VOL Knob: Adjusts the volume for Bluetooth audio or AUX input.
- VOLUME Knob: Controls the overall output volume of the guitar.
- TONE Knob: Adjusts the tonal characteristics of your guitar sound.
- CLEAN & OVER DRIVE Switch: Toggles between clean and overdrive (distortion) modes.
- GAIN Knob: Controls the amount of gain/distortion in overdrive mode.
- INPUT Jack: Standard 1/4'' input for your guitar cable.
- AUX IN Jack: 3.5mm input for external audio devices.
- HEADPHONE Jack: 3.5mm output for headphones for silent practice.
- DC 5V Port: USB-C port for charging the built-in battery.
- MIC IN Jack: Input for a microphone (if applicable, though primarily for guitar).
4. Setup and First Use
4.1 Charging the Amplifier
The amplifier comes with a built-in 2000mAh rechargeable lithium battery. Before first use, it is recommended to fully charge the device.
- Connect the provided USB charging cable to the DC 5V port on the back of the amplifier.
- Connect the other end of the USB cable to a standard 5V USB power adapter (not included) or a computer's USB port.
- The battery indicator on the small screen will show charging status. Charge until the indicator shows a full battery.
4.2 Connecting Your Guitar
- Ensure the amplifier is powered off or volume is set low.
- Connect your guitar to the 1/4'' INPUT jack on the front panel using a standard guitar cable (not included).
4.3 Bluetooth Pairing
To play backing tracks or music through the amplifier:
- Press the 'B.T.' button on the front panel to activate Bluetooth mode. The Bluetooth indicator light will blink.
- On your audio device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
- Select "LEKATO JA-02 II" (or similar name) from the list to pair. The indicator light will become solid once connected.
- Adjust the B.T./AUX VOL knob to control the playback volume.
4.4 Using Headphones
For silent practice, connect your headphones to the 3.5mm HEADPHONE jack on the back panel. The main speaker output will be muted automatically.
5. Operating Instructions
5.1 Powering On/Off
Press and hold the VOLUME knob for a few seconds to turn the amplifier on or off.
5.2 Adjusting Guitar Sound
- VOLUME: Turn this knob to adjust the loudness of your guitar.
- TONE: Experiment with this knob to brighten or darken your guitar's sound.
- GAIN: In Overdrive mode, this knob controls the intensity of the distortion.
5.3 Clean and Overdrive Modes
Use the 'CLEAN & OVER DRIVE' switch to select your desired sound:
- CLEAN: Provides a clear, undistorted guitar tone.
- OVER DRIVE: Engages the built-in distortion effect for a rock or blues sound. Adjust the GAIN knob for more or less distortion.
5.4 Mixing Audio
The amplifier allows you to mix your guitar sound with external audio sources (Bluetooth or AUX IN). Simply adjust the individual VOLUME and B.T./AUX VOL knobs to achieve your desired balance.
6. Specifications
| Feature | Specification |
|---|---|
| Output Power | 5W |
| Battery Capacity | 2000mAh Lithium Battery |
| Input Voltage | DC 5V |
| Connectivity | Bluetooth, 1/4'' Guitar Input, 3.5mm AUX Input, 3.5mm Headphone Output, MIC Input |
| Material | PVC |
| Dimensions (L x W x H) | 147mm x 75mm x 96mm |
| Weight | Approximately 0.33 kg |
7. Maintenance
- Cleaning: Use a soft, dry cloth to clean the exterior of the amplifier. Do not use abrasive cleaners or solvents.
- Storage: Store the amplifier in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Recharge the amplifier regularly, even if not in use for extended periods.
- Handling: Avoid dropping or subjecting the amplifier to strong impacts.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound from guitar | Amplifier not powered on; Volume too low; Guitar cable faulty; Guitar volume off. | Ensure amplifier is on; Increase VOLUME knob; Check guitar cable and guitar's volume. |
| No Bluetooth audio | Bluetooth not paired; B.T./AUX VOL too low; Audio device volume low. | Ensure Bluetooth is paired (solid indicator light); Increase B.T./AUX VOL; Check audio device volume. |
| Distorted sound (unexpected) | Overdrive mode engaged; GAIN too high; Input signal too strong. | Switch to CLEAN mode; Reduce GAIN knob; Lower guitar's output volume. |
| Amplifier not charging | Faulty USB cable or adapter; Charging port issue. | Try a different USB cable and power adapter; Ensure cable is securely connected. |
9. User Tips
- Versatile Use: The amplifier's Bluetooth functionality allows it to double as a portable mini speaker for general audio playback.
- Great for Beginners: Its straightforward controls and decent functionality make it an excellent choice for those new to electric guitar.
- Silent Practice: Utilize the headphone jack for private practice sessions without disturbing others.
10. Warranty & Support
The LEKATO JA-02 II Mini Guitar Amplifier comes with a one-year warranty from the date of purchase. For technical support, troubleshooting assistance, or warranty claims, please contact the seller or manufacturer directly.
An electronic version of the user manual is available for download: LEKATO JA-02 II User Manual (PDF)