Introduction
Unleash your inner rockstar with the LEKATO WS-100 Wireless Guitar System! This system, featuring a rechargeable transmitter and receiver, provides crystal clear 2.4Ghz wireless audio for your electric guitar or bass. Say goodbye to tangled cords and hello to freedom on stage!
This manual provides detailed instructions for setting up, operating, and maintaining your LEKATO WS-100 Wireless Guitar System. Please read it thoroughly before use to ensure optimal performance and longevity of your device.
Package Contents
Please check the package carefully to ensure all items are present:
- 1 x LEKATO WS-100 Transmitter
- 1 x LEKATO WS-100 Receiver
- 1 x Type-C Charging Cable
- 1 x Portable Charging Box
- 1 x User Manual (this document)
Product Overview
The LEKATO WS-100 system consists of a transmitter and a receiver, designed for wireless audio transmission for musical instruments. Both units feature a 190° rotatable plug for versatile connection.
Figure 1: LEKATO WS-100 Wireless System components and key features.
Components and Indicators
- Transmitter: Connects to your instrument (e.g., guitar). Features a power/pairing button and LED indicators for battery and connection status.
- Receiver: Connects to your amplifier, mixer, or other audio input. Features a power/pairing button and LED indicators for battery and connection status.
- 190° Rotatable Plug: Both the transmitter and receiver are equipped with a 190° rotatable plug, allowing for optimal positioning and compatibility with various instrument jack placements.
- Portable Charging Box: A dedicated case for storing and charging both the transmitter and receiver. It includes a Type-C charging port and battery indicators.
Figure 2: Portable charging box with transmitter and receiver, showing Type-C charging port and battery indicators.
Setup
- Charge the Devices: Before first use, fully charge both the transmitter and receiver using the provided Type-C cable and charging box. The charging box can provide two full charges, extending battery life by 2 x 6 hours. The charging box input is 5V 2A, and device input is 5V 1A.
- Connect Transmitter: Plug the transmitter into your instrument's output jack (e.g., electric guitar, bass, keyboard). Adjust the 190° rotatable plug for the best fit. The system supports both 3.5mm and 6.35mm plugs.
- Connect Receiver: Plug the receiver into the input of your amplifier, mixer, or audio interface. Adjust the 190° rotatable plug as needed.
- Power On: Press and hold the power button on both the transmitter and receiver until the LED indicators light up.
- Pairing: The system features automatic channel setup for plug-and-play operation. If manual pairing is required or you wish to change channels, press and hold the button on both the transmitter and receiver for 3 seconds to pair them. The LED indicators will show connection status.
Figure 3: Transmitter connected to an electric guitar, demonstrating 6.35mm and 3.5mm plug compatibility.
Figure 4: Setup showing transmitter on guitar and receiver on amplifier, highlighting the 190° rotatable plug and instrument compatibility.
Operating Instructions
Once the transmitter and receiver are charged, connected, and paired, you are ready to use your wireless system.
- Power On/Off: Press and hold the power button on each unit for approximately 2-3 seconds to turn them on or off.
- Status Indicators: Observe the LED indicators on both units. A solid green light typically indicates a stable connection, while flashing lights may indicate pairing mode or low battery.
- Playing: Begin playing your instrument. The audio will be wirelessly transmitted to your amplifier or mixer with low latency and high fidelity.
Figure 5: The LEKATO WS-100 system offers 'Plug and Play' functionality for immediate use.
Multiple Devices and Channels
The LEKATO WS-100 system supports simultaneous broadcasts on 4 channels, allowing multiple pairs of devices to operate without interference under the same circumstances. Additionally, one transmitter can send a signal to multiple receivers at the same time, which is useful for monitoring or sending signals to multiple amplifiers.
Figure 6: Illustration of one transmitter broadcasting to multiple receivers and four independent pairs operating simultaneously.
Figure 7: Pairing process for simultaneous broadcasts on 4 channels.
Charging
The LEKATO WS-100 system is designed for convenience with its portable charging box.
- Using the Charging Box: Place the transmitter and receiver into the charging box. The box will automatically begin charging them. The charging box itself can be recharged via its Type-C port.
- Direct Charging: You can also charge the individual transmitter and receiver units directly using the Type-C cable, bypassing the charging box if preferred.
- Battery Life: Each full charge of the transmitter and receiver provides approximately 6 hours of continuous use. The charging box can recharge the devices twice, offering a total of 18 hours of usage (6 hours initial + 2x6 hours from box).
- Charging Indicators: The charging box and individual units have LED indicators to show charging status and battery levels.
Maintenance
To ensure the longevity and optimal performance of your LEKATO WS-100 Wireless Guitar System, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the units. Avoid using abrasive cleaners, solvents, or harsh chemicals.
- Storage: Store the system in a cool, dry place away from direct sunlight and extreme temperatures. Always store the transmitter and receiver in the charging box when not in use to protect them.
- Battery Care: For best battery health, avoid completely draining the batteries frequently. Recharge them regularly. If storing for an extended period, ensure the batteries are partially charged (around 50%).
- Avoid Moisture: Do not expose the devices to water or excessive moisture.
- Handle with Care: Avoid dropping or subjecting the units to strong impacts.
Troubleshooting
If you encounter any issues with your LEKATO WS-100 Wireless Guitar System, please refer to the following troubleshooting tips:
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound or intermittent sound |
|
|
| Poor sound quality (noise, distortion) |
|
|
| Units not charging |
|
|
Specifications
Figure 8: Key performance specifications of the LEKATO WS-100 system.
| Feature | Specification |
|---|---|
| Brand | LEKATO |
| Model | WS-100 |
| Frequency | 2.4GHz wireless transmission |
| Sampling Rate | 24bit/48KHz sample rate |
| Delay | <6.7ms |
| Transmission Distance | 30 meters (100 feet) effective outdoor distance; 15 meters through walls |
| Dynamic Range | >105dB |
| Frequency Response | 20-20KHz, +1dB/-3dB |
| Compatible Devices | Electric Guitar, Bass, Keyboard, Electric Violin, Electric Drum, Audio Mixer |
| Number of Channels | 4 (simultaneous use) |
| Power Source | Battery Powered (Internal rechargeable batteries) |
| Batteries Included | Yes |
| Charging Box Input | 5V 2A |
| Device Input | 5V 1A |
| Package Weight | 0.26 kg |
| Package Dimensions (L x W x H) | 11 cm x 7 cm x 5 cm |
Note: The 'Output Wattage: 100 Watts' mentioned in some descriptions typically refers to an amplifier's output, not the wireless system itself. The wireless system transmits the instrument's signal.
Warranty and Support
LEKATO products are designed for reliability and performance. For any warranty claims or technical support, please contact the retailer or manufacturer directly. Keep your proof of purchase for warranty purposes.
For additional information and resources, you may refer to the official user manual PDF available here.