Shark RV2310, RV2310AE, AV2501S, AV2501AE, RV2502AE Compatible Filter Kit

Contents

Instruction Manual: Shark AI Robot Vacuum Replacement Base Pre-Motor Filter Kit

For Models: RV2310, RV2310AE, AV2501S, AV2501AE, RV2502AE, AV2511AE, RV2400WS, RV240BLXUS, RV2502AECA, RV2300S, RV2320S, RV2360AE, RV2360S, UR0200SR, UR2500SRCA, UR2350AE, UR2360S

1. Product Overview

This kit provides replacement pre-motor filters and a cleaning brush for various Shark AI Robot Vacuum models. The filters are designed to maintain high-efficiency filtration and protect your vacuum's motor by capturing dust, dirt, and allergens.

Image showing six sets of white foam and felt filters, along with one cleaning brush.
Figure 1: Contents of the Replacement Filter Kit, including foam filters, felt filters, and a cleaning brush.

2. Setup and Installation

Ensure your Shark AI Robot Vacuum is powered off and unplugged before proceeding with filter replacement.

2.1 Compatibility

These replacement parts are compatible with the following Shark AI Robot Vacuum models:

  • AV2310, AV2310AE, AV2501AE, AV2501S, AV2511AE
  • RV2400WS, RV240BLXUS, RV2502AE, RV2502AECA
  • RV2300S, RV2310, RV2310AE, RV2320S, RV2360AE, RV2360S
  • UR0200SR, UR2500SRCA, UR2350AE, UR2360S

They replace part #XBPFRV2500. Please double-check your robot model before installation.

Image showing a Shark AI Robot Vacuum on a floor with debris, and a set of replacement filters in the foreground. Text indicates 'Great Fit Models'.
Figure 2: The filters are designed for a great fit with compatible Shark AI Robot Vacuum models.

2.2 Installation Steps

  1. Locate the dirt-tank on your Shark AI Robot Vacuum.
  2. Remove the dirt-bin by firmly grasping it and pulling it out from the vacuum.
  3. To access the filters, find the release latch on the dirt-bin and pull it to open and empty the bin.
  4. Carefully remove the old pre-motor filters (both foam and felt).
  5. Insert the new replacement foam and felt filters into their designated slots within the dirt-bin. Ensure they are seated correctly.
  6. Close the dirt-bin securely and re-install it into the vacuum cleaner.

3. Filter Function and Operation

These premium foam and felt filters are crucial for your robot vacuum's performance. They are engineered for high-efficiency filtration, capturing 99.7% of contaminants and impurities from the air.

  • High Quality Felt Filters: Designed to capture fine dust and allergens.
  • Premium Foam Filter: Acts as a pre-filter, capturing larger particles and protecting the felt filter and motor.
  • Motor Protection: Prevents dust and debris from reaching and damaging the vacuum's motor.
  • Air Purification: Helps prevent captured particles from being released back into your home's air, contributing to a cleaner environment.
Diagram illustrating high efficiency filtration with felt filters, a foam filter, and a cleaning brush. Text highlights 'High Quality Felt Filters' and 'Premium Foam Filter'.
Figure 3: High-efficiency filtration system components.

4. Maintenance

Regular cleaning and timely replacement of your filters are essential for maintaining your Shark AI Robot Vacuum's peak performance and extending its lifespan.

4.1 Cleaning Instructions

The filters are washable and reusable:

  1. Remove the filters from the dirt-bin as described in the installation steps.
  2. Wash the filters by hand with warm water. Avoid using harsh detergents or abrasive materials.
  3. Gently squeeze out excess water.
  4. IMPORTANT: Allow the filters to completely air dry for at least 24 hours before re-installing them. Do not use a dryer or other heating elements, as this can damage the filter material.
  5. Use the included multifunctional cleaning brush to remove any stubborn debris from the filters or the dirt-bin.
Image showing a foam filter and a felt filter being splashed with water, illustrating their washable and reusable nature. Text advises to let air dry completely before replacing.
Figure 4: Washable and reusable filters. Ensure complete air drying before re-installation.

4.2 Replacement Schedule

It is recommended to:

  • Wash the filters once a month.
  • Replace the filters every 2-3 months, or more frequently depending on usage and household conditions (e.g., presence of pets, high dust levels).

5. Troubleshooting

  • Reduced Suction Power: If your vacuum's suction power decreases, the filters may be clogged. Remove and clean them as per the maintenance instructions. Ensure they are completely dry before re-installation. If the issue persists after cleaning, replace the filters with new ones.
  • Filter Not Fitting Correctly: Double-check that you have purchased the correct replacement filters for your specific Shark AI Robot Vacuum model. Refer to the compatibility list in Section 2.1. Ensure the filters are inserted into the dirt-bin correctly and securely.
  • Unusual Odors: If you notice unusual odors from your vacuum, the filters might be holding onto trapped debris or moisture. Clean the filters thoroughly and ensure they are completely dry. If odors persist, consider replacing the filters.

6. Specifications

FeatureDetail
MaterialPremium Foam Felt (Sponge)
ColorWhite
Density60 PPI (Pores Per Inch)
Filtration EfficiencyCaptures 99.7% of contaminants
Package Contents6 sets of filter cotton (foam and felt filters), 1 multifunctional cleaning brush
OriginMainland China
Image highlighting product advantages: 60 PPI density, ultra-thick, protects vacuum motor, captures large particles, extends HEPA filter life, washable and reusable.
Figure 5: Key advantages and features of the replacement filters.

7. User Tips

  • For optimal performance, always ensure filters are completely dry before placing them back into the vacuum's dirt-tank. Installing wet filters can lead to mold growth and damage to the vacuum.
  • Regularly check your vacuum's dirt-tank and filters, especially if you have pets or live in a dusty environment, to prevent premature clogging and maintain strong suction.
  • Consider keeping a spare set of filters on hand. This allows for quick replacements, ensuring continuous cleaning while one set is being washed and air-dried.

8. Warranty and Support

For any questions regarding the installation, maintenance, or performance of these replacement filters, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase for any potential warranty claims or support inquiries.

© 2023 Replacement Parts Manual. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.