1. Introduction
The EPEVER IT-NC G3 Series MPPT Charge Controller is engineered for off-grid solar systems requiring both efficient solar charging and reliable DC load power. This advanced controller excels beyond standard MPPT devices by not only charging batteries effectively but also directly powering DC loads. This functionality makes it an ideal solution for diverse applications such as solar streetlights, recreational vehicles (RVs), marine vessels, and remote monitoring systems.
Featuring a robust charging capacity ranging from 50A to 100A, the IT-NC G3 boasts an impressive 99.9% MPPT tracking efficiency, ensuring maximum utilization of solar energy. Select models offer dual PV input options, further enhancing energy harvesting capabilities. For enhanced convenience, some models integrate a built-in BLE Bluetooth module, facilitating seamless wireless monitoring and management via a dedicated mobile application. Its intelligent load control system supports multiple operational modes, guaranteeing a stable power supply to connected DC devices. Remote monitoring is streamlined through an RS485 port, with optional Bluetooth, WiFi, or 4G modules available for real-time data access and system control.
Constructed with a durable all-metal die-cast housing and offering IP32 or IP43 protection (model dependent), the IT-NC G3 is built for long-lasting performance in various challenging off-grid environments. Whether your needs involve powering solar lighting, RV appliances, or industrial equipment, this MPPT controller with integrated load output delivers smart, efficient, and versatile solar power management.

Front view of the EPEVER IT-NC G3 Series MPPT Solar Charge Controller.
2. Safety Information
Please read all instructions and warnings in this manual carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or severe injury.
- Ensure all power sources (solar panels, battery) are disconnected before wiring or servicing the controller.
- Use appropriate tools and wear personal protective equipment during installation.
- Verify correct polarity for all connections to prevent damage to the controller and other components.
- Ensure proper grounding of the system as per local electrical codes.
- Do not exceed the maximum input voltage or current ratings of the controller.
- Install the controller in a well-ventilated area, away from flammable materials and direct sunlight.
- The controller is designed for indoor use or protected outdoor environments with IP32 or IP43 rating.
- This product is certified with CE, IEC62109, UL1741, and EMC (Class B) standards, indicating compliance with safety and electromagnetic compatibility requirements.
3. Product Overview
The IT-NC G3 Series MPPT Solar Charge Controller features a robust design with intuitive controls and comprehensive connectivity options. Below are the main components and key features:
3.1. Components

Angled view of the controller, highlighting input/output terminals and the LCD display.
- PV Input Terminals: Connect to solar panels. Some models (80A/100A) support dual PV inputs (PV1, PV2).
- Battery Terminals: Connect to the battery bank.
- Load Terminals: Connect to DC loads.
- LCD Display: Shows real-time data, events, and power recording. Allows setting most parameters.
- Control Buttons: For navigation and parameter adjustment on the LCD.
- Communication Ports: RS485 (COM), CAN, BMS ports for remote monitoring and system integration.
- Remote ON/OFF Terminal: For external control of PV charging.
- Relay Terminal: Dry contact output for auxiliary equipment control.
- Cooling Fins: Integrated heat sink for efficient heat dissipation.
3.2. Key Features

Overview of the main features of the IT-NC G3 Series.
- MPPT Charge: High tracking efficiency (≥99.5%) and conversion efficiency (up to 98.5%). Dual PV inputs on some models.
- Constant Voltage Output Function: Enables direct load supply from PV energy without a battery, provided sufficient solar power.
- Multi-unit Parallel: Supports up to 6 units in parallel for flexible system expansion (with or without battery).
- Battery Types: Compatible with various Lithium-ion and Lead-acid batteries (AGM, GEL, FLD).
- RTS/BMS Communication: Supports BMS-Link module or RTS-D47K temperature sensor for accurate charge/discharge control of lithium batteries.
- Load Output: Offers 6 load control modes to meet diverse application needs.
- Built-in Bluetooth: Select models include a built-in Bluetooth module for convenient APP management.
- Local Monitor: LCD screen allows setting most parameters and monitoring system status without additional accessories.
- Remote Monitor: Isolated RS485 COM port for firmware upgrades and optional Bluetooth, WiFi, or 4G modules for wireless monitoring.
- Data Log: Real-time data, events, and power recording with 15000 storage capacity, covering full capacity cycle.
- Work Environment: Full load operation in -25~40°C, with automatic power reduction during high-temperature charging.
- Low Static Loss: Designed for low power consumption (<50mA static loss) for long system standby time.
- Housing: All-metal die-cast housing with IP43 or IP32 protection level.
- Certifications: Designed with IEC62109, UL1741, and EMC (Class B) high certification standards.
4. Setup and Installation
Proper installation is crucial for the safe and efficient operation of your solar charge controller. Follow these steps carefully.
4.1. Mounting the Controller
- Choose a dry, well-ventilated location, protected from direct sunlight and moisture.
- Ensure sufficient clearance around the controller for proper airflow, especially around the cooling fins.
- Mount the controller vertically on a non-flammable surface using appropriate fasteners.
4.2. Wiring Connections
Always connect the battery first, then the solar panels, and finally the load. Disconnect in reverse order.

Dual PV input wiring diagrams: Independent (INDE) and Centralized (CEN) modes.
- Battery Connection: Connect the battery to the controller's battery terminals (+ and -). Ensure correct polarity.
- PV Input Connection:
- 50A/60A/75A Models: Feature only 1 PV input. Connect your solar array to the single PV input terminals.
- 80A/100A Models: Support 2 PV inputs (PV1, PV2). These can be configured in two modes:
- INDE Mode (Independent): Two PVs can have different specifications, orientations, and connection modes.
- CEN Mode (Centralized): Requires external parallel connection of PVs.
- The minimum PV input voltage must be Battery voltage + 2V and must be higher than 28V.
- Load Connection: Connect your DC loads to the controller's load terminals (+ and -).
- Charge Enable Terminal: This standard accessory allows you to control PV charging by plugging or removing the terminal. This is useful for battery maintenance or replacement without disconnecting PV connections.

Comparison of PV input configurations for different amperage models.
4.3. Multi-unit Parallel Connection
The IT-NC G3 series supports up to 6 units working in parallel for flexible system extension, with or without a battery.

Multi-unit parallel wiring diagram with battery connection.

Multi-unit parallel wiring diagram without battery connection.
- In parallel applications, the PV side and load side of each controller must be independent.
- In the same parallel system, all product models must be the same, but their IDs must be different.
- Parallel communication cables (CC-RJ45-RJ45-120) and terminal resistors (RJ45-CAN-R120) are optional and may be required.
- Ensure parallel communication cables do not cross with PV, battery input, or AC output cables to avoid interference.
4.4. BMS Communication
For accurate charge/discharge control of lithium batteries, the controller can communicate with a Battery Management System (BMS).

Diagram showing BMS communication setup with an optional BMS-Link module.
- The controller is compatible with 33 lithium battery protocols.
- For EPever batteries or some Pylontech batteries, direct communication is possible. Other brands may require a BMS-Link module.
- BMS parameters can be displayed and managed for precise charging/discharging.
- The communication cable is an accessory of the BMS-Link module and may need customization.
5. Operating Instructions
5.1. Local Monitoring and Parameter Settings
The integrated LCD display provides real-time system status and allows for parameter adjustments.

LCD display showing PV status, battery status, and load status.
- Monitor PV, battery, and load running status, real-time data, software, and hardware versions.
- Fault information of the system is displayed via the LCD screen.
- All load modes and control parameters can be set directly via the LCD.
- A one-click restore factory default function is available.
5.2. Load Output Modes
The controller supports 6 load modes to cater to various application needs:

Visual representation of different load output modes.
- Manual Mode: Load is controlled manually (ON/OFF).
- Sunset Load ON Mode: Load turns on at sunset.
- Sunrise Load ON Mode: Load turns on at sunrise.
- Sunset Load ON + Timer Mode: Load turns on at sunset and stays on for a set duration.
- Timer Mode: Load turns on and off based on a programmed schedule.
- Always ON Mode: Load remains on 24 hours a day until battery over-discharge protection is triggered.
5.3. Remote Monitoring
The controller offers various options for remote monitoring and management.

Remote monitoring setup using RS485, Bluetooth, WiFi, or 4G modules.
- Built-in Bluetooth: Models with "BLE" (e.g., IT6415NCG3BLE, IT10415NCG3BLE) have built-in Bluetooth for convenient APP management.
- Isolated RS485 COM Port: Used for firmware upgrades or connecting optional Bluetooth, WiFi, or 4G modules to achieve wireless monitoring.
5.4. Data Logging
The controller records real-time data, events, and power information.

Data logging and download capability.
- Features 15000 storage capacity, providing full capacity cycle coverage.
- Data is not lost in case of power failure.
- SCADA software (Solar Guardian) can query and download historical data for statistics and analysis.
6. Maintenance
Regular maintenance ensures optimal performance and longevity of your solar charge controller.
- Cleaning: Periodically clean the controller's exterior, especially the cooling fins, to prevent dust accumulation and ensure efficient heat dissipation. Use a dry cloth.
- Connection Checks: Regularly inspect all wiring connections (PV, battery, load) for tightness and corrosion. Loose connections can cause overheating and performance issues.
- Cable Integrity: Check all cables for signs of wear, damage, or fraying. Replace damaged cables immediately.
- Ventilation: Ensure the installation area remains well-ventilated and free from obstructions that could impede airflow to the controller.
- Firmware Updates: Check the manufacturer's website for any available firmware updates to ensure your controller has the latest features and bug fixes.
- Battery Maintenance: For battery maintenance or replacement, utilize the "Charge Enable Terminal" to safely disconnect PV charging without rewiring.
7. Troubleshooting
This section provides solutions to common issues you might encounter with your IT-NC G3 Series controller.
7.1. Common Issues and Solutions
- No Power to Controller:
- Check battery connections and ensure the battery voltage is within the controller's operating range.
- Verify that the battery fuse (if installed) is intact.
- No PV Charging:
- Ensure solar panels are connected correctly and receiving sufficient sunlight.
- Check PV input voltage and current.
- Verify that the "Charge Enable Terminal" is properly connected (if used).
- Inspect PV fuses (if installed).
- Load Not Working:
- Check load connections and ensure the load is not drawing excessive current.
- Verify the battery voltage is above the low voltage disconnect (LVD) setting.
- Check the selected load control mode on the LCD display.
- Ensure the load fuse (if installed) is intact.
- Overheating:
- Ensure adequate ventilation around the controller.
- Clean any dust or debris from the cooling fins.
- Reduce system load or PV input if operating in extreme temperatures.
7.2. Protection Features
The controller is equipped with multiple protection features to safeguard the system:

Diagram illustrating the comprehensive protection features.
- Reverse Polarity: Protects against incorrect battery or PV connections.
- Over Current: Prevents damage from excessive current draw.
- Over Voltage: Protects against high voltage from PV or battery.
- Over Discharging: Prevents battery damage from excessive discharge.
- Overload: Protects the load circuit from excessive current.
- Over Temperature: Reduces power or shuts down to prevent damage from high internal temperatures.
- Short Circuit: Protects against short circuits in PV, battery, or load circuits.
- Night Reverse Charging: Prevents battery discharge back into PV panels at night.
8. Specifications
Detailed technical specifications for the EPEVER IT-NC G3 Series MPPT Solar Charge Controller.

Full technical specifications for various IT-NC G3 models.
| Parameter | Value |
|---|---|
| Battery Rated Voltage | 12V/24V/48VDC Auto |
| Controller Operating Voltage Range | 8-62V |
| Battery Type | AGM (Default) / Gel / Flooded / User / LiFePO4 / Li(NiCoMn)O2 / User |
| Rated Charging/Discharging Current | 100A |
| Rated Charging Power | 1250W/12V, 2500W/24V, 5000W/48V |
| Maximum Charging Power | 1300W/12V, 2600W/24V, 5200W/48V |
| Rated Load Current | 100A |
| Maximum Load Current | 100A |
| PV Maximum Open-circuit Voltage | 200V (98V lowest operating temperature) |
| MPPT Operating Voltage Range | Battery voltage plus 2V, and ~188V (25°C) |
| Tracking Efficiency | ≥99.5% |
| Maximum Conversion Efficiency | 98.5% |
| Full Load Efficiency | 97.5% |
| Temperature Compensation Coefficient | -3mV/°C/2V (Default) |
| Self-Consumption (Enabled Communication) | 59mA/12V, 36mA/24V, 46mA/48V |
| Self-Consumption (Disabled Communication) | 48mA/12V, 25mA/24V, 14mA/48V |
| Grounding Type | Common negative grounding |
| Dry Contact Output (Relay) | Rated value: 5A/30VDC, Maximum value: 0.5A/60VDC |
| RS485 Communication Port | 5VDC/200mA (RJ45) |
| Dimension (L x W x H) | 307 × 255 × 145mm |
| Net Weight | 5.09kg |
| Operating Temperature Range | -25°C to +60°C |
| Storage Temperature Range | -30°C to +70°C |
| Enclosure | IP43 (Controller & White Terminal Cover), IP32 (Controller Only) |
| Certification | CE, IEC62109-1, UL1741, EMC (Class B) |
8.1. Work Environment and Derating
The controller is designed for robust operation, but performance may be affected by extreme temperatures.

Power derating curve for IT-NC G3 (100A) and ET-NC G3 (100A) models when temperature exceeds 40°C.
- Full load operation is supported in temperatures ranging from -25°C to +40°C.
- When the ambient temperature is higher than 40°C, the charging power will automatically reduce to prevent overheating and ensure stable operation.
9. User Tips
Here are some practical tips to enhance your experience with the EPEVER IT-NC G3 Series MPPT Solar Charge Controller:
- Match Components: Always ensure your solar panel array voltage and current, and battery bank voltage, are compatible with the controller's specifications to prevent damage and ensure optimal performance.
- Wire Sizing: Use appropriately sized wires for all connections (PV, battery, load) to minimize voltage drop and heat loss, especially for longer cable runs. Refer to electrical codes for guidance.
- Battery Settings: If using a 'User' defined battery type, carefully configure the charging parameters (e.g., float voltage, boost voltage, LVD) to match your battery manufacturer's recommendations for maximum battery life.
- Monitor Performance: Regularly check the LCD display or use the mobile app/remote monitoring tools to observe system performance, battery state of charge, and any error codes. This helps in early detection of potential issues.
- Environmental Protection: While the controller has an IP32/IP43 rating, protecting it from direct heavy rain, snow, or extreme dust can further extend its lifespan.
10. Warranty and Support
EPEVER products are designed for reliability and performance. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official EPEVER website.
If you encounter any issues or have questions regarding the installation, operation, or maintenance of your IT-NC G3 Series MPPT Solar Charge Controller, please contact your authorized dealer or EPEVER customer support. Provide your product model number and a detailed description of the issue for efficient assistance.