HUTT C7 Intelligent Window Cleaning Robot

Introduction

The HUTT C7 Intelligent Window Cleaning Robot is designed to provide an efficient and thorough cleaning solution for various vertical surfaces, including high-rise windows. Featuring innovative dual-wheel drive suspension pressurization, AI frequency conversion, and a water jet system, the C7 ensures deep decontamination without damaging surfaces. This manual provides essential information for the safe and effective use of your new window cleaning robot.

Important Safety Information

• Always ensure the safety rope is securely attached before operating the robot, especially for high-rise windows. The safety rope is rated for 148kg load-bearing capacity.
• Do not use the robot on cracked or damaged glass.
• Ensure the power cord is properly connected and not tangled. The patented double-line design integrates the security rope with the power cord to prevent entanglement.
• Keep hands and loose clothing away from moving parts during operation.
• Do not immerse the robot in water.
• Store the robot in a dry, safe place when not in use.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Package Contents

Please check the box for the following items:

• HUTT C7 Host (Window Cleaning Robot)
• Turntable (installed)
• Remote control
• EAS (Emergency Stop System)
• Safety rope
• Adapter
• Plug (appropriate for your region: EU, US, AU, UK, KR)
• Kettle (for filling water tank)
• User Manual
• Nozzle

Note on Plug Adapters: As China exports electrical appliances, the correct plug adapter suitable for the country in the shipping address will be provided. For example:

• EU Plug Adapter: Most Europe Countries, Most African Countries, Most Middle East Countries, South Korea, Chile, Paraguay, etc.
• US Plug Adapter: United States, Canada, Most North and South American Countries, Japan, Philippines, Thailand, etc.
• AU Plug Adapter: Australia, New Zealand, Argentina.
• UK Plug Adapter: England, Ireland, Scotland, Hongkong, Pakistan, Singapore, Malaysia, Vietnam, etc.

Specifications

Setup Guide

1. Unpack the Robot: Carefully remove all components from the packaging.
2. Attach Cleaning Pads: Ensure the turntable cleaning pads are securely attached to the robot.
3. Fill Water Tank: Open the water tank cap and fill the 80ml visual water tank with clean water or a special cleaning fluid using the provided kettle. The water tank shell is made of high-quality corrosion-resistant material.
4. Connect Power and Safety Rope:
   • Connect the power adapter to the robot and then to a power outlet.
   • Attach the safety rope to a sturdy anchor point, such as a window frame or a heavy piece of furniture. The robot features a patented double-line design that integrates the security rope with the power cord to prevent entanglement and ensure easy storage.

   

   

5. Placement: Place the robot on the surface you wish to clean. Ensure it is flat against the surface.

Operating Instructions

1. Power On: Press the enlarged start button on the robot. The robot will adhere to the surface using its powerful 5500Pa suction.
2. Start Cleaning: Once adhered, press the start button again or use the remote control to begin the cleaning cycle. The robot utilizes HUTT SLAM4.0 Intelligent Path Planning for 99% clean coverage, intelligently planning water paths and adjusting to obstacles like window frames and handles.
3. Cleaning Modes: The robot offers three cleaning modes: Deep mode, Daily mode, and Spot mode. You can switch between these modes as needed.
4. Water Spray Function: The robot features an innovative air booster water spray technology with ultra-V wide-angle booster spraying. Water droplets are 20um, ensuring they are not blown away by wind and effectively dissolve various stains.





5. Automatic Return: After completing the cleaning cycle, the robot will automatically return to its original starting point for easy access.
6. Power Off: Press and hold the power button to turn off the robot. Carefully remove it from the surface.

Key Features in Operation:

• Dual-Wheel Drive Suspension Pressurization: The independent dual motors increase climbing force by 30%, and the 3D suspended chassis provides 55N pressurized suction without loss, preventing slipping even on wet surfaces.



• High-Speed Rotation: The double discs rotate at 70 rpm, mimicking human hand wiping in circular motions for deep decontamination without damaging the glass.



• Edge Cleaning: The thickness of the chassis is increased by 1.5cm, allowing the robot to clean edges and window frames more thoroughly, rejecting dead corners.



• AI Intelligent Frequency Conversion: The robot intelligently identifies materials (glass, marble, wooden door) and automatically adjusts adsorption force for optimal cleaning.

Product Video:

Maintenance

• Clean Cleaning Pads: After each use, remove and clean the cleaning pads. They can be washed and reused.
• Empty Water Tank: Empty any remaining water from the 80ml visual water tank.
• Wipe Down Robot: Wipe the robot's exterior with a soft, dry cloth to remove any dust or residue.
• Store Properly: Store the robot and its accessories in a cool, dry place.

Troubleshooting

Robot is not adhering to the surface:

Ensure the surface is clean and dry. Check if the suction cups or cleaning pads are worn out or dirty. Verify the power connection is secure.

Robot is slipping or leaving streaks:

Check the cleaning pads for excessive dirt or wear. Ensure the water tank is filled with appropriate cleaning fluid. The triangular structure of the bottom plate is designed to prevent slipping by increasing friction.

Robot stops unexpectedly:

Check the power connection. The built-in 650mAh battery provides power-off adsorption for 25 minutes, but continuous operation requires external power. Ensure there are no obstacles preventing movement.

Water spray is not working:

Check if the 80ml water tank is filled. Ensure the nozzle is not clogged.

User Tips

• For best results, pre-clean heavily soiled windows to remove loose dirt before using the robot.
• Use distilled water or a recommended window cleaning solution in the water tank to prevent mineral buildup and ensure streak-free cleaning.
• Regularly inspect the safety rope and its attachment points for any signs of wear or damage.
• The robot's AI intelligent frequency conversion allows it to adapt to different surfaces; however, always test on a small, inconspicuous area first.

Warranty and Support

The HUTT C7 Intelligent Window Cleaning Robot is backed by a manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions. For technical support, troubleshooting assistance, or spare parts, please contact the seller or authorized service center. Keep your purchase receipt as proof of purchase for warranty claims.