Zealot-P1 Portable Karaoke Bluetooth Speaker User Manual

Introduction

Thank you for choosing the Zealot-P1 Portable Karaoke Bluetooth Speaker. This manual provides essential information for the safe and efficient operation of your device. Please read it thoroughly before use and keep it for future reference. The Zealot-P1 is designed to deliver powerful sound with multiple playback options, including Bluetooth, TF card, USB, and AUX, along with a karaoke function for an enhanced audio experience.

Important Safety Information

Please read all safety warnings and instructions carefully before using this product to prevent injury or damage.

• To ensure correct use and trouble-free operation, please read this user manual carefully first.
• For the first use, it is recommended to fully charge the speaker.
• Use and store the product at room temperature.
• Do not expose the product to fire, high temperatures, direct sunlight, or similar environments.
• Keep the speaker volume moderate to avoid temporary or permanent hearing impairment.
• Do not use organic solvents or other chemicals to clean the product.
• Do not allow small particles to enter the product.
• Do not disassemble the product or make any modifications to its structure or any part thereof.
• If the battery is not replaced correctly, there is a risk of explosion. Only the same type of battery can be replaced.
• The battery (battery pack) must not be exposed to direct sunlight, fire, or similar overheating conditions.
• Do not throw or drop the product to avoid damage.
• If using a power adapter for charging, ensure it is CCC certified and meets required standards.

Product Overview

The Zealot-P1 is a portable karaoke Bluetooth speaker designed for versatile audio playback and entertainment. It features a robust design with a comfortable handle for easy portability.

Key Features:

• 40W powerful sound output with tweeter and woofer.
• IPX6 waterproof rating for outdoor use.
• Multiple playback modes: Wireless (Bluetooth 5.0), TF card, USB flash drive, AUX input, and Karaoke.
• Built-in 7200mAh battery for extended playback.
• Reverb adjustment for microphone.
• RGB colorful light effects.
• Comfortable handle for portability.

Ports and Controls:

The speaker features various ports for connectivity and charging, typically located on the rear or side panel.

• TF Card Slot: For playing music directly from a TF (MicroSD) card.
• USB Port: For playing music from a USB flash drive.
• AUX Input: For wired connection to external audio devices using a 3.5mm audio cable.
• OUT/5V Port: Likely a USB output for charging other devices (power bank function).
• USB-C Charging Port: For charging the speaker's internal battery.
• Karaoke Input: For connecting the included microphone.
• Control Buttons: Power, volume, mode selection, play/pause, etc. (Refer to the physical device for exact button layout).

Specifications

Setup Guide

1. Initial Charging

Before first use, it is highly recommended to fully charge the Zealot-P1 speaker.

• Connect the provided USB Type-C charging cable to the speaker's charging port.
• Connect the other end of the cable to a compatible DC 5V power adapter (CCC certified and standard-compliant adapter recommended, not included).
• The charging indicator (if present) will show the charging status. A full charge typically takes about 3 hours.

2. Powering On/Off

• To power on, press and hold the Power button (refer to device for exact location) for approximately 2 seconds.
• To power off, press and hold the Power button again for approximately 2 seconds.

3. Bluetooth Pairing

The speaker will automatically enter Bluetooth pairing mode when powered on for the first time or if no device is connected.

1. Ensure the speaker is powered on and in Bluetooth mode (a voice prompt or indicator light may confirm this).
2. On your mobile device (smartphone, tablet, etc.), enable Bluetooth.
3. Search for available Bluetooth devices and select "Zealot-P1" from the list.
4. Once paired, the speaker will indicate a successful connection (e.g., a sound prompt).
5. If you encounter issues, disconnect other Bluetooth devices from your phone first, then retry pairing.

4. Connecting the Microphone

Connect the included microphone to the designated Karaoke input port on the speaker.

Operating Instructions

1. Playback Modes

The Zealot-P1 supports multiple audio input sources. Use the Mode button (refer to device for exact location) to switch between modes.

• Wireless (Bluetooth 5.0): Connect wirelessly to your Bluetooth-enabled devices as described in the Setup Guide.
• TF Card: Insert a TF (MicroSD) card loaded with MP3 audio files into the TF card slot. The speaker will automatically detect and play music.
• USB Flash Drive: Insert a USB flash drive loaded with MP3 audio files into the USB port. The speaker will automatically detect and play music.
• AUX Input: Connect an external audio device (e.g., MP3 player, computer) using a 3.5mm audio cable to the AUX port.
• Karaoke: Connect the microphone to the Karaoke input. Adjust reverb as needed.

2. Volume Control

Use the volume buttons on the speaker (typically labeled '+' and '-') to adjust the playback volume. You can also control the volume from your connected device.

3. Reverb Adjustment (Karaoke Mode)

When using the microphone for karaoke, you can adjust the reverb effect to enhance your vocals. Refer to the speaker's control panel for specific reverb adjustment buttons or knobs.

4. RGB Colorful Light Effect

The speaker features RGB colorful light effects that can add a dynamic visual element to your music. These lights typically synchronize with the audio. Refer to the speaker's controls for any specific light mode adjustments.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the speaker. Do not use organic solvents, alcohol, or other chemical cleaners, as these may damage the surface or internal components.
• Storage: Store the product at room temperature, away from direct sunlight, high humidity, and extreme temperatures.
• Battery Care: To prolong battery life, avoid fully discharging the speaker frequently. If storing for an extended period, charge the battery to about 50% every few months.
• Protection: Do not allow small particles or liquids to enter the speaker's openings. Avoid dropping or subjecting the speaker to strong impacts.

Troubleshooting (FAQ)

Q: What should I do if I can't turn on my speaker?

A: After receiving the speaker, please charge it first. It should then turn on normally. Ensure the battery is not completely depleted.

Q: What should I do if the battery isn't charging?

A: Sometimes the battery may be in a state of waiting to be activated due to low temperature or other conditions. Usually, after continuous charging for 1 hour, the charging status will return to normal. Ensure you are using a compatible DC 5V charger.

Q: What should I do if the sound cannot be output?

A: This is often a formatting issue when playing music from a TF card or USB drive. Please adjust the music file format to MP3. Also, check if the volume is turned up on both the speaker and the connected device.

Q: What should I do if I can't connect or pair with Bluetooth?

A: Please disconnect any other Bluetooth devices from your phone first, then search for devices to connect. Ensure the speaker is in Bluetooth pairing mode.

Q: What should I do if there is no sound after Bluetooth connection?

A: Please check if the speaker volume and phone volume have been adjusted to the lowest level. If there is no problem with the volume, please check if music is actively playing on the phone.

Q: What should I do if I can't adjust the volume?

A: Please check if the volume of the speaker is already at its maximum. If both the phone and speaker are at their maximum volume, further adjustment upwards is not possible.

Q: What should I do if I can't connect the microphone?

A: The Zealot-P1 model includes a microphone input. Ensure the microphone is correctly plugged into the designated Karaoke input port. If your speaker is a different model (e.g., S32 or S53 mentioned in the FAQ, which are not P1), it might have a built-in microphone function, but for P1, an external microphone is used via the input port.

Q: What should I do if my SD card (TF card) is not recognized?

A: This is usually a format issue with the storage card. The storage card needs to be formatted to FAT32, and music files should typically be in MP3 format for proper recognition.

Q: How do I connect the speaker to a TV?

A: The speaker can usually be connected to a TV through an AUX data cable (3.5mm audio cable).

Q: How does the standalone working mode function?

A: As long as the mode you choose (e.g., TF card or USB playback) works properly, the speaker typically does not actively switch modes. If it cannot continuously read music from the current source, it may automatically switch to a mode that can be used normally.

User Tips

• Always fully charge the speaker before its first use to ensure optimal battery performance.
• If experiencing charging issues, try charging for at least an hour, especially if the speaker has been in a cold environment.
• For media playback from TF cards or USB drives, ensure your storage device is formatted to FAT32 and audio files are in MP3 format for best compatibility.
• When connecting via Bluetooth, temporarily disconnect other Bluetooth devices from your phone to avoid interference and simplify the pairing process.
• Remember to check both the speaker's volume and your connected device's volume if you experience no sound.

Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official Zealot website or contact your retailer. Keep your purchase receipt as proof of purchase.

A PDF version of this user manual is available for download: Zealot-P1 User Manual (PDF).

FCC Compliance Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Environmental Information

Hazardous Substances Statement (China RoHS)

To comply with China's management methods for restricting pollution from electronic information products, the following table indicates the presence of hazardous substances in the product components.

Note 1: "O" indicates that the content of this hazardous substance in all homogeneous materials of this component is below the limit requirements specified in SJ/T11363-2006 standard.

Note 2: "X" indicates that the content of this hazardous substance in at least one homogeneous material of this component exceeds the limit requirements specified in SJ/T11363-2008 standard.

Note 3: The components marked with "X" comply with the RoHS directive - 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment, enacted by the European Parliament.

The environmental protection use period for this electronic information product is 10 years, during which the toxic and hazardous substances or elements contained will not leak out under the described usage conditions, nor will they cause pollution to the environment or severe damage to persons or property.