Lekato JM-91

Contents

Lekato Vocal Metronome JM-91 User Manual

Model: JM-91

1. Product Overview

The Lekato JM-91 Vibrating Metronome is an electronic digital metronome designed to enhance your musical practice. It features a built-in timer, male/female vocal counts, and vibration alerts to help musicians of all levels maintain precise timing and rhythm. Its versatile design makes it suitable for various instruments including guitar, piano, drums, and ukulele.

Front view of Lekato JM-91 Metronome with display showing settings.
Figure 1: Lekato JM-91 Vibrating Metronome

2. Key Features

  • Clear and Versatile Sounds: Features a built-in speaker with loud and clear output. Offers various tones including male/female vocal counts, beat click, block, drum, clapping, and cowbell.
  • Vibrating Beats: Provides a silent practice option by switching between sound and vibration modes, eliminating distracting click sounds.
  • Essential Rhythm Tool: Supports a wide tempo range from 30 to 250 beats per minute (BPM), 9 different beats (0, 1, 2, 3, 4, 5, 6, 7, 8, 9), and 6 rhythm patterns.
  • Minute Timer Function: Allows setting practice sessions from 1 to 90 minutes with precise minute-by-minute control.
  • Clipable Stand Design: Equipped with a clip and stand for convenient placement on pockets, belts, straps, or flat surfaces.
  • USB Charging: Rechargeable via a standard USB cable (included).
  • Adjustable Volume: Easily control the loudness of rhythm beats and vocal counts.
  • Headphone Output: Includes a 3.5mm jack for stereo headphones, ideal for private practice or noisy environments.
Diagram of Lekato JM-91 Metronome with labeled components (indicators, speaker, headphone jack, LCD, volume, bracket).
Figure 2: Labeled Components of the JM-91 Metronome

3. Package Contents

Upon unpacking, please ensure all the following items are present:

  • 1 x Lekato Digital Metronome (JM-91)
  • 1 x USB Charge Cable
  • 1 x User Manual
Contents of the Lekato JM-91 package (metronome, box, manual, USB cable).
Figure 3: Package Contents

4. Setup

4.1 Power Supply

The JM-91 metronome can be powered in two ways:

  • AAA Batteries: Insert 3 AAA alkaline batteries (not included) into the battery compartment.
  • USB Power: Connect the included USB charge cable to the DC 5V port on the metronome and to a regular USB power adapter (DC 5V 1A, not included) or a power bank.

It is recommended to fully charge the metronome before first use. If the power indicator flickers during use, it indicates low battery, and the device should be charged promptly.

Diagram showing two power supply options: 3 AAA batteries and USB cable.
Figure 4: Power Supply Options

4.2 Placement

The metronome features a clip and a foldable stand for versatile placement:

  • Clip: Attach the metronome to your pockets, belts, shoulder straps, hand straps, or even foot straps for hands-free use.
  • Stand: Use the integrated foldable stand to place the metronome on a flat surface like a table or music stand.
Lekato JM-91 Metronome clipped to a person's jeans pocket.
Figure 5: Metronome with Clip

5. Operation

5.1 Basic Controls

  • Power Button: Press to turn the metronome ON/OFF.
  • Up/Down Arrows: Use to adjust values such as tempo, beat, rhythm, or timer duration.
  • SEL (Select) Button: Press to cycle through different parameters (e.g., Beat, Tempo, Rhythm, Sound, Timer) on the LCD display.
  • Music Note Button: Used for sound/rhythm selection.
  • Volume Control Slider: Located on the side, slide up or down to adjust the output volume.
  • SPK/MAS Switch: Located on the side, this switch allows you to toggle between speaker output (sound) and vibration mode.

5.2 Setting Tempo and Beat

  1. Turn on the metronome using the red power button.
  2. Press the SEL button until "Tempo" is highlighted on the LCD.
  3. Use the Up/Down Arrows to set the desired tempo (BPM) between 30 and 250.
  4. Press the SEL button again to highlight "Beat".
  5. Use the Up/Down Arrows to select the desired beat count (0, 1, 2, 3, 4, 5, 6, 7, 8, or 9).
  6. Press the SEL button to highlight "Rhythm".
  7. Use the Up/Down Arrows to select one of the 6 available rhythm patterns.

5.3 Sound and Vocal Counts

The metronome offers various sound options, including male and female vocal counts:

  1. Press the SEL button until "Sound" is highlighted.
  2. Use the Up/Down Arrows or the Music Note Button to cycle through the 6 available sound types, including male and female vocal counts.
  3. Adjust the volume using the Volume Control Slider on the side.
Metronome display showing various sound types (wood block, cowbell, drum, traditional metronome, shaker).
Figure 6: Various Metronome Sound Options
Metronome display highlighting male and female vocal count options.
Figure 7: Male and Female Vocal Counts

5.4 Vibration Mode

To use the metronome in silent vibration mode:

  • Locate the SPK/MAS switch on the side of the metronome.
  • Slide the switch to activate vibration mode. This will mute the speaker output.
Close-up of a finger operating the SPK/MAS switch for vibration.
Figure 8: Activating Vibration Mode

5.5 Using the Timer

The built-in timer allows you to set a practice duration:

  1. Press the SEL button until "Timer" (indicated by "min") is highlighted.
  2. Use the Up/Down Arrows to set the desired practice time from 1 to 90 minutes.
  3. The metronome will count down the set time during your practice.
Metronome display highlighting the 90-minute timer function.
Figure 9: Timer Function Display

5.6 Headphone Use

For private practice or in noisy environments, connect stereo headphones (not included) to the 3.5mm headphone jack on the side of the metronome. The volume control slider will also adjust headphone volume.

User practicing guitar with the metronome connected to headphones.
Figure 10: Using Headphones with the Metronome

6. Maintenance

  • Cleaning: Clean the metronome only with a dry cloth. Do not use alcohol or other cleaning fluids, as they may damage the device.
  • Battery Care: If using the internal rechargeable lithium battery, charge it every 2 months to prevent low battery protection issues, even if not in use, due to slight self-discharge. The lithium battery capacity will decrease gradually after repeated charge and discharge.
  • Storage: Store the device away from heat sources, damp or dusty areas. Avoid violent vibrations or shock.
  • Disassembly: Do not attempt to disassemble or repair the product yourself. Refer all servicing to qualified service personnel.
  • Power Off: Always turn off the metronome when not in use.

7. Troubleshooting

  • Low Battery Indication: If only one power indicator is flickering during use, it signifies a low battery. Charge the metronome promptly to avoid affecting performance.
  • No Sound/Vibration:
    • Check the SPK/MAS switch on the side to ensure it's in the desired mode (speaker for sound, MAS for vibration).
    • Ensure the volume is not set to minimum if using sound mode.
    • If using headphones, ensure they are properly plugged in and functional.
  • Inaccurate Beat/Tempo:
    • Verify the tempo, beat, and rhythm settings on the LCD display.
    • Ensure there are no obstructions between the metronome and any wireless equipment that might interfere with its operation.
  • Device Not Turning On:
    • Check battery level and charge the device if necessary.
    • If using AAA batteries, ensure they are inserted correctly and are not depleted.

8. Specifications

Feature Specification
Model JM-91
Shell Material Plastic
Tempo Range 30 to 250 Beats/minute
Beat Settings 0, 1, 2, 3, 4, 5, 6, 7, 8, 9
Rhythm Patterns 6 types
Countdown Range 1 to 90 minutes
Sounds/Tones 6 sounds, male and female vocal counts
Power Supply 3x AAA Batteries (not included) or Regular USB Power Adapter (DC 5V 1A, not included)
Dimensions 0.94 x 2.36 x 4.33 inches (24 x 60 x 110 mm)
Weight 2.1 oz (60 g)
Image showing the metronome with various musical instruments it is suitable for.
Figure 11: Suitable for All Kinds of Musical Instruments

9. Safety & Warnings

Please read all instructions carefully before use to ensure safety and prevent damage.

  • Children: Keep the device and its cord out of reach of children under 3 years old. In case of ingestion, seek medical attention immediately.
  • Disassembly/Repair: Do not disassemble or repair this product yourself. All servicing should be referred to qualified service personnel.
  • Environment: Do not use or store the metronome near heat sources, in damp or dusty areas. Avoid violent vibrations or shock.
  • Impact: Do not drop this product, as it may malfunction.
  • Cleaning: Clean only with a dry cloth. Do not use alcohol or other cleaning fluids.
  • Ventilation: Do not block any ventilation openings. Install in accordance with manufacturer's instructions.
  • Power Cord: Protect the power cord from being walked on or pinched, especially at plugs, convenience receptacles, and where it exits the apparatus.
  • Accessories: Use only attachments/accessories specified by the manufacturer.
  • Cart/Stand Use: If used with a cart, stand, tripod, bracket, or table, exercise caution when moving the combination to avoid injury from tip-over.
  • Lightning/Unuse: Unplug the apparatus during lightning storms or when unused for long periods.
  • Earthing: The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.
  • Disconnect Device: Where the MAINS plug or an appliance coupler is used as the disconnect device, it shall remain readily operable.
  • Waste Disposal: This product must not be disposed of with household waste. Follow the WEEE Directive (2012/19/EU) and national laws for recycling waste electrical and electronic equipment (EEE). Contact your local city office or household waste collection service for proper disposal information.

General Safety Advisory

This product may involve inherent risks. Always assume potential hazards are present until proper safety verification is completed.

Essential Precautions:

  • Assess the Environment: Look for and identify potential dangers such as electrical sources, trip hazards, toxic substances, or moving machinery before proceeding.
  • Use Personal Protective Equipment (PPE): Wear appropriate PPE (e.g., safety glasses, gloves, helmet) as required for the specific task or environment.
  • Follow Procedures: Never bypass safety protocols, guards, or interlocks. Use equipment only for its intended purpose.
  • Stay Alert: Do not operate machinery or perform hazardous tasks if you are fatigued, distracted, or under the influence of medication or substances that impair judgment.

Immediate Action Required:

  • STOP if you are uncertain about the safety of any action.
  • CONSULT the relevant official safety manuals or qualified personnel for guidance.
  • DO NOT PROCEED without proper authorization and training for hazardous tasks.

Your safety and the safety of others is paramount. Neglecting warnings can lead to severe injury or fatal accidents.

This product conforms with all applicable European Union regulations. The CE marking indicates compliance with legal requirements for health, safety, environmental protection, and consumer protection, allowing it to be placed on the market throughout the European Economic Area.

10. Warranty & Support

For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact the seller directly. Keep your proof of purchase for any warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.