1. Product Overview
This document provides instructions for the original clean water tank designed as a spare part for the dreame Mova Z5, Mova Z5 Pro, and Mova Z50 Ultra vacuum sweeping robots. This tank is essential for the robot's mopping function, holding clean water for dispensing during operation.
Product Identification
- Product Name: Clean Water Tank for Mova Z5/Z5 Pro/Z50 Ultra
- Brand: dreame
- Model Compatibility: Mova Z5, Mova Z5 Pro, Mova Z50 Ultra
- Part Type: Vacuum Robot Accessory (Clean Water Tank)
- Batch/Serial Number: 00137AM2100211FD
Product Visuals
Figure 1: Front view of the Clean Water Tank, showing the dreame logo.
Figure 2: Side view of the Clean Water Tank.
Figure 3: Internal view of the Clean Water Tank, showing the water tubing and MAX fill line indicator.
Figure 4: Top view of the Clean Water Tank, showing the water fill port.
Manufacturing Process
Video 1: Overview of the manufacturing process, highlighting quality control and precision engineering.
2. Safety & Warnings
Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Keep the device and its cord (if applicable to the robot) out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use (as a clean water reservoir for compatible vacuum robots).
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury or damage to the robot.
- Do not expose the robot's electrical components to water or moisture. While this is a water tank, ensure proper sealing and installation to prevent water from reaching sensitive parts of the robot.
3. Setup and Installation
Before First Use
- Carefully unpackage the new clean water tank.
- Remove all protective films or packaging materials from the device.
- Inspect the tank for any visible damage or defects.
Replacing the Water Tank
- Ensure your dreame Mova Z5/Z5 Pro/Z50 Ultra robot is powered off and disconnected from its charging dock.
- Locate the existing water tank on your robot. Refer to your robot's main user manual for its exact location and removal procedure.
- Carefully remove the old water tank. If it contains water, empty it before disposal.
- Align the new clean water tank with the designated slot on your robot.
- Gently push the new tank into place until it clicks securely. Ensure it is fully seated to prevent leaks and ensure proper water dispensing.
4. Operating Instructions
Filling the Clean Water Tank
- Remove the clean water tank from the robot if it's installed, or open the fill port if accessible while installed.
- Locate the water fill port (refer to Figure 4). Open the rubber stopper or lid covering the port.
- Slowly fill the tank with clean tap water. For optimal performance and to prevent mineral buildup, distilled or demineralized water is recommended.
- Do not overfill. Observe the MAX fill line indicator inside the tank (refer to Figure 3).
- Securely close the rubber stopper or lid of the fill port to prevent leaks.
- Wipe any spilled water from the exterior of the tank before re-installing it into the robot.
Robot Operation
Once the clean water tank is filled and securely installed, you can operate your dreame Mova Z5/Z5 Pro/Z50 Ultra robot as usual. The robot will automatically draw water from this tank for its mopping functions according to its programmed settings.
5. Maintenance
Cleaning the Water Tank
Regular cleaning of the clean water tank is crucial to prevent mold, mildew, and mineral buildup, ensuring optimal performance and hygiene.
- Remove the clean water tank from the robot.
- Empty any remaining water from the tank.
- Rinse the inside of the tank thoroughly with clean water. You can use a small brush (like a bottle brush) if necessary to reach all corners.
- For stubborn residue or to sanitize, you can use a mild detergent solution. Rinse thoroughly multiple times to ensure no soap residue remains.
- Allow the tank to air dry completely before refilling or re-installing it into the robot. This helps prevent bacterial growth.
Storage
If the robot or tank will not be used for an extended period, empty the water tank completely and allow it to dry before storing.
6. Troubleshooting
Common Issues and Solutions
| Problem | Possible Cause | Solution |
|---|---|---|
| Water tank leaks |
|
|
| Robot not dispensing water |
|
|
| Unpleasant odor from tank |
|
|
7. Specifications
| Feature | Detail |
|---|---|
| Material | Plastic |
| Compatibility | dreame Mova Z5, Mova Z5 Pro, Mova Z50 Ultra |
| Dimensions (Approx.) | Length: 10 cm, Width: 10 cm, Height: 10 cm |
| Weight (Approx.) | 0.4 kg |
| Origin | Mainland China |
8. User Tips
- Use Filtered Water: To prolong the life of your robot's water pump and prevent mineral buildup in the tank and nozzles, consider using filtered, distilled, or demineralized water.
- Regular Cleaning: Make it a habit to rinse the water tank after every few uses, or at least weekly, to maintain hygiene and prevent odors.
- Empty When Not in Use: If you don't plan to use the mopping function for several days, empty the water tank to prevent stagnant water issues.
9. Warranty and Support
For warranty information, please refer to the original purchase documentation or contact your retailer. As a spare part, its warranty may be subject to specific terms.
Manufacturer & EU Representative Information
Manufacturer: Synertrade FR SAS
Address: 9 rue du Bat d'Argent, 69001 Lyon, France
Phone: +33 774555006
Email: info@syner-sarl.cn
For further details or specific instructions related to your robot, please consult the comprehensive user manual provided with your dreame Mova Z5/Z5 Pro/Z50 Ultra vacuum sweeping robot. A PDF version of a general product manual for vacuum robot accessories can be found here.