1. Introduction
This manual provides essential information for the proper installation, operation, and maintenance of the Advantech AIMB-705VG Industrial Equipment Motherboard (AIMB-705 REV:A1). This product is a used, second-hand item, confirmed to be 100% tested before shipping and of original quality. Please read this manual thoroughly before proceeding with any procedures.
2. Product Overview
The Advantech AIMB-705VG is an industrial-grade motherboard designed for robust applications. Below are visual references to key components and features of the board.

Figure 2.1: Front View of AIMB-705 REV:A1 Motherboard

Figure 2.2: Rear View of AIMB-705 REV:A1 Motherboard

Figure 2.3: Rear I/O Panel

Figure 2.4: CPU Socket Area

Figure 2.5: Expansion Slots
3. Specifications
Below are the key specifications for the Advantech AIMB-705 REV:A1 motherboard:
| Attribute | Value |
|---|---|
| Item Type | Air-conditioning Installation |
| Origin | Mainland China |
| High-concerned chemical | None |
| Parameter accuracy | Some parameters are missing, auto fill |
| Test condition | 100% tested before shipping |
| Product Status | Used, Second-hand |
| Quality condition | Original |
| Inventory status | Frequent changes, suggest consultation |
| Package | Simple |
Physical Dimensions and Weight
- Length: 20 cm
- Width: 16 cm
- Height: 8 cm
- Weight: 1.5 kg
4. Setup and Installation
Proper installation is crucial for the stable operation of your industrial equipment. It is recommended that installation be performed by qualified personnel.
4.1. Pre-Installation Checklist
- Ensure you have all necessary components: CPU, RAM, CPU cooler, power supply, storage devices, and any required expansion cards.
- Prepare a static-free workspace. Use an anti-static wrist strap.
- Refer to your system chassis manual for specific mounting instructions.
4.2. Installation Steps
- Install the CPU: Carefully open the CPU socket lever, align the CPU with the socket (matching the golden triangle/notch), gently place it in, and close the lever.
- Install the CPU Cooler: Apply thermal paste (if not pre-applied) and securely mount the CPU cooler according to its manufacturer's instructions.
- Install RAM Modules: Open the clips on the RAM slots, align the RAM module with the notch, and press down firmly on both ends until the clips snap into place.
- Mount the Motherboard: Carefully place the motherboard into the chassis, aligning it with the standoffs. Secure it with screws.
- Connect Power: Connect the main 24-pin ATX power connector and the 4/8-pin CPU power connector from your power supply to the motherboard.
- Connect Storage Devices: Connect SATA data and power cables to your hard drives/SSDs and the motherboard.
- Install Expansion Cards: Insert any necessary PCIe or PCI cards into their respective slots and secure them.
- Connect Front Panel & I/O: Connect the front panel headers (power button, reset, USB, audio) and rear I/O cables (USB, Ethernet, audio) to the appropriate headers on the motherboard.
5. Operating Instructions
Once the motherboard is installed and all components are connected, you can proceed with system operation.
5.1. Initial Power On
- Ensure all power connections are secure.
- Connect a monitor, keyboard, and mouse.
- Press the power button on your chassis.
5.2. BIOS/UEFI Setup
Upon initial boot, you may need to enter the BIOS/UEFI setup to configure boot order, system time, and other settings. Typically, you press a key like DEL, F2, or F10 during startup to enter the setup utility.
5.3. Operating System Installation
Install your preferred operating system (e.g., Windows, Linux) from a bootable USB drive or optical media. Follow the on-screen instructions provided by the OS installer.
5.4. Driver Installation
After OS installation, install all necessary drivers for the motherboard's chipsets, integrated graphics, audio, and network interfaces. These are usually available from the Advantech support website for the AIMB-705 series.
6. Maintenance
Regular maintenance helps ensure the longevity and reliability of your industrial motherboard.
- Cleaning: Periodically clean dust from the motherboard and cooling components using compressed air. Ensure the system is powered off and unplugged before cleaning.
- Inspection: Visually inspect the board for any signs of damage, loose connections, or bulging capacitors.
- Firmware Updates: Check the Advantech support website for BIOS/UEFI updates. Only update if necessary and follow the instructions carefully to avoid system instability.
7. Troubleshooting
This section covers common issues you might encounter and basic troubleshooting steps.
7.1. No Power
- Check if the power supply is connected correctly and switched on.
- Verify all power cables (24-pin ATX, 4/8-pin CPU) are securely seated.
- Ensure the front panel power button cable is correctly connected to the motherboard header.
7.2. No Display
- Ensure the monitor is connected to the correct video output (integrated or discrete GPU).
- Reseat the RAM modules. Try booting with only one RAM module if you have multiple.
- Check if the CPU cooler is properly installed and making good contact with the CPU.
7.3. POST Errors / Beep Codes
- Listen for beep codes from the motherboard's speaker. These codes often indicate specific hardware issues (e.g., RAM, CPU, GPU). Consult the Advantech documentation for a list of beep codes for the AIMB-705 series.
- If the motherboard has a POST code display, note the code and refer to the motherboard manual for its meaning.
8. Support
For further technical assistance, driver downloads, or detailed documentation, please refer to the official Advantech support resources for the AIMB-705 series motherboards. Given that this is a used product, direct manufacturer warranty may not apply. Please consult with your seller for any specific support or return policies.