1. Introduction
The MOONDROP PILL OWS Open Ear Headphones are designed for an immersive and comfortable audio experience. Featuring an innovative ear-clip design, Bluetooth 6.0 connectivity, and AI ENC (Environmental Noise Cancellation), these earbuds provide high-fidelity sound while allowing you to stay aware of your surroundings. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.
2. Package Contents
Please check the package for the following items:
- Charging case
- Earbuds (Left and Right)
- Charging cable
- User Manual (this document)
- Service Card
Visual Reference:


3. Product Overview
The MOONDROP PILL OWS earbuds feature a unique ear-clip design for comfort and stability. The charging case is designed to resemble a pill, offering a distinctive aesthetic.

Earbud Components
- Charging Port: USB-C
- Indicator: Shows charging status.
- Rear-cavity pressure vent: For acoustic performance.
- Microphone: For calls and AI ENC.
- Charging pin: Connects to the charging case.
- Sound nozzle: Delivers audio.
The left and right sides of the earbuds are marked with "L" and "R" to distinguish them.

4. Setup
First Connection
- When you take the earbuds out of the charging case, they will automatically power on and enter pairing mode.
- If the earbuds were previously paired, they will automatically turn on and reconnect to the last connected device when taken out.
- It is recommended to turn on your smartphone's Bluetooth before removing the earbuds from the charging case.
Wearing the Earbuds
To achieve the best sound experience, ensure you correctly distinguish between the left and right earbud and wear them appropriately. The unique design of OWS means that different wearing methods can significantly impact sound quality. If you find the sound quality lacking, manually adjust the position of the earbuds until you achieve the best listening experience.

MOONDROP APP Installation
For enhanced functionality and customization, download the MOONDROP APP. The app allows you to customize touch operations, switch between Bass Control settings, utilize 2nd generation online interactive DSP, and enable/disable dual-device connectivity.

5. Operating Instructions
Power On/Off
- Power On: Take the earbuds out of the charging case. They will automatically power on.
- Power Off: Place the earbuds back into the charging case to recharge them. They will power off once fully charged. If no device is connected for more than 3 minutes, the earbuds will automatically power off. They will also power off if the battery voltage drops below 3.0V.
Touch Controls (Product Functions)
- Play/Pause Music: Double-click the left/right earbud.
- Skip Track: Triple-click left earbud for the previous track; Triple-click right earbud for the next track.
- Switch Modes (Game Mode/Music Mode): Quadruple-click the left or right earbud to enter/exit game mode.
- Answer Call: Double-click the left/right earbud.
- Hang Up Call: Long press left/right earbud for 1.5 seconds.
- Decline Call: Double-click the left/right earbud.
- Call Transfer: Double-click the left/right earbud.
- Call Switching: Triple-click left/right earbud.
You will hear an audible 'Ding' prompt if you tap on the touch area.
Dual-Device Connectivity
The dual-device connection feature is turned off by default. To enable this function, please access the Function Settings in the MOONDROP APP. If enabled, it will automatically turn off after 5 minutes. You can click the function button in the app to keep it enabled if needed.
Important Notes:
- When playing music on the first device, if music is started on the second device, playback on the first device will automatically pause.
- Connection priority between devices is as follows: Call > Audio > Standby.
Connecting a Third Device
When two devices are already connected, you must manually disconnect one device before connecting a third device. Alternatively, if you are not currently in a playback or call state, you can long-press the touch area on both earbuds simultaneously for 3 seconds to disconnect both devices and connect to a new device.
Automatic Reconnection
- After the earbuds are powered on, they will automatically reconnect to the last paired device. If reconnecting to two devices, you will hear prompts for both; however, priority is given to the device that was connected most recently.
- If the earbuds are disconnected from the effective communication range, they will automatically attempt to reconnect within 3 minutes once you re-enter the range.
- When both devices are connected and one device moves out of range, reconnection to that device after more than 3 minutes will require you to click on the connection record for reconnection.

Game Mode
The Pill can easily switch between low-latency game mode and high-fidelity music mode through touch controls. This feature delivers an immersive gaming experience along with studio-quality sound accuracy. The 55ms latency data is based on official specifications of the SoC. Actual usage may vary due to environmental interference and connected devices.

One-Click Auto EQ Tuning
The Pill features an Auto EQ function in the MOONDROP APP. With no need for manual repeated fine-tuning, simply select your target curve to activate one-click audio optimization and unlock unlimited possibilities.


6. Maintenance
Cleaning the Equipment
- Wipe the equipment with a soft, dry cloth, and use a brush or other tools to remove earwax or dirt from the receiver.
- Clean the battery contacts with a dry cloth.
- Do not use chemicals or cleaning agents as they may cause the surface to fade or corrode and could lead to electric shock or fire.
- Protect the equipment from dust, sweat, ink, oil, and chemical products (such as cosmetics, antibacterial sprays, hand sanitizers, detergents, and pesticides) as they may damage the internal and external components or cause the performance to deteriorate. If the equipment comes into contact with any of the above substances, please wipe it clean with a soft, non-shedding cloth.
Storage
- The equipment should only be stored on a flat surface to avoid damage from drops.
- The equipment can be used in ambient temperatures ranging from 0°C to 35°C, and can be stored in temperatures between -20°C and 50°C. Using or storing the equipment outside these temperature ranges may cause damage or shorten battery life.
- Avoid storing the equipment in extremely hot areas, such as cars in summer, to prevent damage or battery explosions.
- Prolonged exposure to direct sunlight, such as on a car's dashboard, or storage with metal objects like coins, keys, and necklaces, may cause scratches or damage to the equipment.
- Keep the equipment away from magnetic fields, as exposure may cause malfunctioning or battery discharge.
7. Troubleshooting
Resetting the Earbuds
To clear the pairing information and reset the earbuds while in pairing mode with no connected device, long-press both the left and right earbuds simultaneously for 8 seconds.
Disconnection Issues
- While connected, you can manually turn off Bluetooth on your phone to disconnect the earbuds, which will cause them to re-enter pairing mode.
- Alternatively, if the earbuds are connected to a device and not playing audio or in a call, you can long-press the touch area on both earbuds simultaneously for 3 seconds to disconnect the current connection and re-enter pairing mode.
Sound Quality Issues
If you experience sound quality issues, ensure the earbuds are correctly distinguished (Left/Right) and worn appropriately. Manually adjust their position in your ear until you achieve the best listening experience. Utilizing the MOONDROP APP's EQ tuning features can also significantly improve sound quality, especially bass response.
Battery Issues
If the battery voltage drops below 3.0V, the earbuds will automatically power off. Ensure the earbuds are fully charged by placing them in the charging case. The charging indicator will show orange during charging and turn off when fully charged. For earbuds, a white indicator means normal battery (≥10%), and an orange flashing indicator means low battery (<10%).
8. Specifications
| Feature | Description |
|---|---|
| Name | MOONDROP PILL Ear-clip Earbuds |
| Model | MD-OWS-003 |
| Bluetooth Version | 6.0 |
| Bluetooth Transmission Protocol | A2DP/AVRCP/HFP/HSP |
| Codec Protocol | SBC/AAC |
| Charging Port | USB-C |
| Working Range | 10 meters (barrier-free open environment) |
| Charging Time (Earbuds) | About 2 hours |
| Charging Time (Charging Case) | About 2 hours |
| Input | 5V-1A |
| Output | 5V-0.25A |
| Earbud Battery Capacity | 3.7V/40mAh |
| Charging Case Battery Capacity | 3.7V/300mAh |
| Earbud Battery Life (AAC mode) | About 8 hours |
| Charging Case Battery Life (AAC mode) | About 20 hours |
| CMIIT ID | 25J51A52E102 |
| Water Resistance | IPX4 |
| Material | Plastic |
| Sound Isolating | No |
| Active Noise-Cancellation | No (Features AI ENC) |
| Volume Control | Yes |
| Control Button | No |
| Vocalism Principle | Dynamic |
| Wireless Type | Bluetooth |
| Communication | True wireless |
| Style | OWS ear clip headphones |
| Origin | Mainland China |
Manufacturer: Chengdu Shuiyueyu Technology Co., Ltd.
Address: Haike Road West, Haixia Technology Industry Park, Wenjiang District, Chengdu, Sichuan
Warning: Please use a 5V1A charging device.
9. User Tips
- Optimal Fit: Take time to adjust the earbuds to find the most comfortable and secure fit for your ear. Proper placement is crucial for the best sound quality and bass response.
- App Customization: Download the MOONDROP APP to unlock advanced features like Auto EQ tuning and Bass Control settings. Many users find that adjusting the EQ in the app significantly enhances the sound, especially for bass.
- Awareness: The open-ear design is excellent for outdoor activities or when you need to be aware of your surroundings, as it allows ambient noise to pass through.
- Long-term Comfort: While generally comfortable, some users might experience discomfort after very long periods of use. Adjusting the fit or taking short breaks can help.
- Dual Connection: Leverage the dual Bluetooth connection feature (available with the latest firmware and enabled via the app) for seamless switching between two devices.
10. Safety Information
Please read and follow all safety instructions carefully to prevent damage, injury, or malfunction.
General Safety
- Using the device in a rough manner may result in damage, explosion, or fire.
- Avoid dropping or subjecting the equipment to strong impact, as this could lead to equipment or battery damage, abnormal functioning, or reduced service life. It may also cause overheating, burning, fire, or other hazards.
- Handle and dispose of equipment and chargers with care, and do not throw them into the fire.
- Keep batteries and equipment away from heating appliances such as microwaves, ovens, or radiators to prevent overheating and potential explosions.
- When disposing of waste batteries or equipment, ensure compliance with local laws and regulations.
- Refrain from squeezing or puncturing the equipment.
- Avoid exposing the equipment to high external voltages, as this could result in internal short circuits and overheating.
- Take measures to protect equipment, batteries, and chargers from damage.
- Avoid exposing equipment and batteries to extreme temperatures, as this can lead to equipment damage, reduced charging capacity, and shortened service life.
- Refrain from using data cables with peeling or damaged insulation, as well as damaged or malfunctioning chargers.
- Do not store equipment near or inside water heaters, microwave ovens, hot cooking equipment, or high-pressure vessels, as this could lead to battery leakage, equipment overheating, and fire hazards.
- Avoid using or storing the equipment in areas with high concentrations of dust or airborne particles.
- Dust or foreign matter may lead to equipment failure, fire, or electric shock.
- Keep the charger socket and the smaller end of the charger away from conductive materials such as liquid, dust, metal powder, or pencil lead.
- Avoid touching the charger socket with sharp tools or hitting it, as conductive materials may cause short circuits or corrosion of contacts, leading to explosions or fires.
- When using the wireless charger, do not place foreign objects such as metal objects, magnets, or magnetic stripe cards between the device and the wireless charger, as this may result in improper charging or overheating.
- Refrain from biting or sucking on equipment or batteries to prevent damage, explosions, or fires. Children or animals may suffocate if they swallow small parts.
- If children use the equipment, ensure that they do so correctly.
- Do not poke the equipment or the attached accessories near the eyes, ears, or mouth, as this may cause suffocation or serious injury.
- Do not use damaged or leaking batteries. To dispose of batteries safely, please contact customer service.
- Some equipment and accessories contain magnets. The American Heart Association and the British Drug and Health Products Administration have warned that magnets can affect the operation of implantable pacemakers, heart rate changers, defibrillators, insulin pumps, or other electronic medical devices (collectively referred to as "medical devices") within 15cm. If you use any of these medical devices, please refrain from using this device and some accessories until consulting your doctor.
- Failure to follow safety precautions and regulations may result in personal injury or property damage.
- Avoid using the equipment near other electronic devices, as most electronic devices use radio frequency signals and may be susceptible to interference.
Usage Environment
- Do not use the equipment in hospitals, airplanes, or automobiles where radio frequency interference may occur.
- If possible, keep the equipment at least 15 cm away from pacemakers to minimize interference. If using medical equipment, consult the manufacturer to determine if it will be affected by the radio frequency emitted by this equipment.
- When on a plane, electronic equipment may interfere with the plane's electronic navigation system. Always follow airline regulations and flight crew instructions. If allowed, use airplane mode.
- The electronic equipment in your car may experience failure due to radio interference. Contact the manufacturer for more information.
- Do not place the equipment in an area with heavy smoke or fog, as it may lead to damage or failure of the equipment.
- If you use hearing aids or cochlear implants, please contact the manufacturer for information about potential radio interference. The radio frequency emitted by this equipment may interfere with some hearing aids and cochlear implants. Before using this equipment, please contact the manufacturer to determine whether it will be affected by the radio frequency emitted.
- Avoid using the equipment near other devices or instruments that emit radio frequency, such as sound systems or radio antenna towers, as it may cause equipment failure.
- Turn off the equipment in environments where an explosion may occur. Always adhere to regulations, instructions, and signage in such environments.
- Do not use the equipment at gas stations or near flammable substances, chemicals, or in areas where an explosion may occur.
- Do not store or carry flammable liquids, gases, or explosives in boxes containing equipment, equipment parts, or accessories.
- If any part of the equipment is damaged, smoking, or emits the smell of burning, please stop using the equipment immediately. It can only be reused after being repaired by the MOONDROP Service Center.
Driving Safety
- Do not use headphones while driving or riding. Otherwise, it may distract your attention and cause accidents. Depending on your area, it may also be illegal.
- Always pay attention to the surrounding environment to avoid hurting yourself or others.
Product Care
- Do not paint or paste paper on the equipment.
- If you are allergic to the paint or metal parts of the equipment, it may cause itching, eczema, or swelling of the skin. When this happens, please stop using the equipment and consult a doctor.
- Install the equipment carefully. Do not place equipment and accessories in or near the airbag deployment area. Improper placement may result in serious injury when the airbag expands rapidly.
- If the equipment becomes bent or deformed, it may damage the equipment or cause parts to malfunction.
- Ensure that the battery and charger reach their maximum service life. If the battery is left unused for a long time, it may fail.
- The equipment will gradually discharge after being left unused for a long time and must be recharged before use.
- It is necessary to disconnect the power supply if you don't use it for a long time.
- The battery should only be used for its specified purpose.
- Follow all instructions in this manual to ensure the longest service life of the equipment and battery. The manufacturer will not guarantee damage or poor performance caused by failure to follow the warnings and instructions.
- Equipment may wear out over time. While some parts and repairs are guaranteed during the validity period, damage or deformation caused by the use of unapproved accessories is not covered by the warranty.
- Do not disassemble, modify, or repair the equipment as this will void the manufacturer's guarantee. For maintenance, please contact the seller or MOONDROP service center.
- Avoid disassembling or puncturing the equipment, as it may cause explosion or fire.
- Do not disassemble or reuse the battery.
- Do not use the equipment only for its specified purpose to prevent breakdowns.
- Refrain from using equipment in public places in a way that may disturb others.
- Only allow qualified personnel to repair the equipment. Unauthorized repairs may void the warranty and cause damage.
11. Warranty and Support
For detailed warranty information and customer support, please refer to the official MOONDROP website or contact your seller. You can also find the full user manual in PDF format here: MOONDROP PILL User Manual (PDF).
Disclaimer
All contents and services available through this equipment belong to third parties and are protected by copyright, patents, trademarks, and other intellectual property laws. This content and service are intended for personal, non-commercial use only. You may not use any content or service without the permission of the content owner or service provider. Additionally, you may not modify, copy, republish, upload, transmit, translate, sell, create new derivative works, develop, or distribute in any way any content or service displayed through this device without the explicit permission of the application content or service provider.
Third-party content and services are provided. MOONDROP does not provide any express or implied guarantee for the content or service provided, regardless of the purpose. MOONDROP expressly declares that it does not undertake any implied warranty or terms or conditions recognized by laws, common law, or other means (including but not limited to merchantability or fitness for a specific purpose). Under any circumstances (including negligence), MOONDROP is not liable for any direct, indirect, incidental, special, or consequential loss or damage, attorney's fees, various expenses, or any other loss or damage caused by any content or service provided through this equipment, even if the possibility of such damage has been informed in advance, whether in contract or tort, or arising from any contained information or the result of your or any third party's use of any content or service.
Third-party services may be stopped or interrupted at any time, and MOONDROP is not responsible or guaranteeing the availability of any content or service. The content and services are provided by third parties through networks and transmission equipment that are beyond the control of MOONDROP. In addition to the general exemption clause, MOONDROP also clearly states that it will not bear any responsibility or obligation for any interruption or delay of any content or service applicable to this equipment.
MOONDROP is not responsible for customer service related to content and service. Any service requirements related to content or service shall be the direct responsibility of the content and service provider.