1. Introduction
The LEKATO WS-MINI2 is a 2.4GHz wireless audio system designed for electric guitars, basses, and other compatible electronic instruments. It features a compact transmitter and receiver set, a convenient magnetic charging case, and offers low latency for an uncompromised performance experience. This system eliminates the need for tangled cables, providing musicians with freedom of movement on stage or during practice.
2. Package Contents
Upon purchasing the WS-MINI2 Wireless Guitar System, you will find the following items in the box:
- 1 x Wireless Transmitter
- 1 x Wireless Receiver
- 1 x Magnetic Charging Case
- 1 x Type-C USB Charging Cable
- 1 x User Manual (this document)

3. Specifications
| Parameter | Description |
|---|---|
| Frequency | 2.4 GHz |
| Sample Rate | 48K/16bit high definition transmission |
| Transmission Distance | 40 meters outdoors, 20 meters through walls |
| Transmission Latency | 12ms |
| Audio Head Rotation Angle | 210° |
| THD+Noise | -98dB |
| THD | <0.02% |
| Dynamic Range | >105dB |
| Frequency Response | 20-20KHz; +1dB/-3dB |
| Supported Device Groups | No limit, but if two pairs use the same channel, power on one by one. |
| Battery | Rechargeable lithium batteries with short-circuit protection. 1 in 2 out Type-C USB charge cable. |

4. Setup
4.1 Charging the Units
Before initial use, ensure both the transmitter and receiver units are fully charged. Place them into the magnetic charging case. The case itself can be charged via the provided Type-C USB cable. The units offer approximately 20 hours of battery life, and the charging case provides an additional 60 hours of endurance.


4.2 Connecting to Your Instrument and Amplifier
- Transmitter Connection: Plug the transmitter unit into your electric guitar, bass, or other compatible instrument's output jack. The 2-in-1 rotating plug supports both 1/4" (6.35mm) and 1/8" (3.5mm) audio jacks. Adjust the 210° rotatable head for optimal positioning.
- Receiver Connection: Plug the receiver unit into the input jack of your amplifier, mixer, or audio interface.


5. Operating Instructions
5.1 Powering On/Off
To power on both the transmitter and receiver units, long-press their respective power buttons. To power off, long-press the power buttons again.
5.2 Pairing and Channel Selection
The WS-MINI2 system features one-click auto pairing. Simply follow these steps:
- Long-press to power on both the transmitter and receiver.
- Double-click the pairing button on both units to match them to the same color channel.
- The LED indicator on each unit will stop flashing once successfully paired.
The system supports 4 signal channels. If you are using multiple WS-MINI2 sets simultaneously or experiencing interference, you can easily switch between channels to find a clear frequency. Ensure that each transmitter-receiver pair is set to a unique channel to avoid interference.


5.3 Performance Range
The WS-MINI2 offers a stable transmission range of up to 40 meters in open outdoor environments and 20 meters through walls, providing ample freedom for movement during performances.

6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the units and charging case. Avoid using abrasive cleaners or solvents.
- Storage: When not in use, store the transmitter and receiver in the magnetic charging case to prevent loss and keep them charged. Store in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the units frequently. Recharge them regularly, even if not in constant use.
- Handling: Handle the units with care. Avoid dropping them or subjecting them to strong impacts.
7. Troubleshooting
- No Sound:
- Ensure both transmitter and receiver are powered on.
- Verify that both units are paired to the same color channel (LEDs should be solid, not flashing).
- Check that the transmitter is securely plugged into your instrument and the receiver into your amplifier/mixer.
- Confirm your instrument and amplifier are working correctly with a standard cable.
- Check battery levels of both units and the charging case.
- Interference/Poor Signal:
- Switch to a different channel on both the transmitter and receiver.
- Ensure no other 2.4GHz wireless devices are operating on the same channel nearby.
- Reduce the distance between the transmitter and receiver.
- Avoid obstacles like thick walls or large metal objects between the units.
- If using multiple WS-MINI2 pairs, power them on one by one to ensure proper channel assignment.
- Units Not Charging:
- Ensure the Type-C cable is securely connected to the charging case and a power source.
- Verify the charging case has power (check its indicator lights).
- Make sure the transmitter and receiver are correctly seated in the magnetic charging slots.
- Try a different Type-C cable or power adapter.
8. User Tips
- For optimal performance, always ensure your units are fully charged before a gig or long practice session.
- Experiment with different channels in crowded wireless environments to find the clearest signal.
- Utilize the 210° rotatable head to ensure the transmitter sits comfortably and securely on your instrument without obstructing your playing.
- Keep the magnetic charging case handy for quick recharges and secure storage, especially when traveling.
9. Warranty and Support
For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. If you encounter any issues not covered in this manual, please reach out to LEKATO customer support for assistance.