KuWFi 10000mAh 4G Mobile Router User Manual

1. Introduction

The KuWFi 10000mAh 4G Mobile Router (Model MF989) is a portable wireless device designed to provide high-speed 4G LTE internet access and Wi-Fi connectivity on the go. Featuring a large capacity battery, an Ethernet port, and support for multiple devices, it is ideal for outdoor use, travel, and home networking. This manual provides detailed instructions for setting up, operating, and troubleshooting your device.

2. Package Contents

Ensure all items are present in your package:

• 1x KuWFi 4G LTE Router (Model MF989)
• 1x USB Cable
• 1x English User Manual

Note: The router features a TS9 antenna port, but the package does not include a TS9 antenna.

3. Product Features

• Built-in 10000mAh Large Capacity Battery: Provides extended usage time, up to 18-24 hours on a full charge, ideal for outdoor use.
• 1x 10/100Mbps Ethernet Port: Can be configured as a WAN or LAN port for versatile application scenarios.
• CAT4 4G LTE Router: Equipped with a 4G network chip, offering speeds up to 150Mbps (actual speeds may vary based on SIM card and network conditions).
• 150Mbps 2.4GHz Wireless Wi-Fi: Supports 802.11 b/g/n Wi-Fi protocol, providing stable wireless networks.
• Indicator Light Display: Allows users to monitor Wi-Fi signal, SIM card status, power, and signal strength at a glance.
• Small Size & Ultra-thin Design: Compact and portable for easy carrying.
• Supports up to 10 Users/Devices: Enables simultaneous internet connection sharing without lag.
• Support for Multiple Devices: Compatible with a variety of electronic devices.
• Supports WPS: Yes
• Antenna Type: Internal

4. Setup Instructions

Important: Before inserting the SIM card, ensure it is activated and its PIN code is disabled. After inserting the SIM card, you need to manually configure the APN information to access the Internet.

1. Insert SIM Card: Carefully open the SIM card slot cover. Insert your Nano SIM card into the designated slot. Ensure the SIM card is inserted correctly before powering on the device. It is recommended to insert the SIM card for one minute first, then turn on the power.

   

2. Power On: Press and hold the power button until the indicator lights illuminate.
3. Connect to Wi-Fi:
   • On your computer or mobile device, search for available Wi-Fi networks.
   • Select the network named 4G-MIFI-3662 (default SSID).
   • Enter the default password: 1234567890.

   

4. Access WebUI:
   • Open a web browser and navigate to 192.168.0.1.
   • Enter the default username: admin and password: admin.

   

5. Configure APN Settings:
   • In the WebUI, navigate to the APN and Network Setting section.
   • Set Auto APN to Disable and Connection Mode to Manual.
   • Enter the correct APN for your SIM card operator (e.g., cmnet). You may need to contact your SIM card provider for this information.
   • Ensure IP Type is IPV4, MTU is 1500, and LTE Authentication Type is NONE.
   • Click Save.

   

5. Operating Instructions

5.1. Wireless Wi-Fi Settings

From the WebUI, navigate to the Wireless Wi-Fi Setting section to customize your Wi-Fi network:

• Wireless Network Status: Enable/Disable Wi-Fi.
• Hide SSID: Choose to broadcast or hide your network name.
• Maximum Simultaneous Clients: Set the maximum number of devices (default 7).
• SSID: Change your Wi-Fi network name.
• Password: Change your Wi-Fi password.
• 802.11 Mode: Set to 802.11n (b/g compatible).
• Channel: Automatic is recommended.
• Channel Bandwidth: HT40 is recommended.
• Authentication Type: WPA2-PSK is recommended for security.
• Encryption Algorithm: AES-CCMP is recommended.

5.2. Ethernet Connection

You can connect a computer directly to the router using an Ethernet cable via the RJ45 port. This allows for direct internet access without Wi-Fi.

5.3. Traffic Management

The WebUI includes a Traffic Management section where you can monitor and control data usage:

• Traffic Control Settings: Set warnings for data usage limits (e.g., Warning Cordon 90%).
• Disconnect Network: Configure the router to disconnect when a traffic limit is reached (e.g., Disconnected Cordon 100%).
• Monthly Traffic Settings: Enable or disable monthly traffic management.

6. Maintenance

To ensure optimal performance and longevity of your KuWFi 4G Mobile Router, follow these maintenance guidelines:

• Keep the device clean and free from dust.
• Avoid exposing the router to extreme temperatures or humidity.
• Do not drop or subject the device to strong impacts.
• Charge the battery regularly, even if not in use, to maintain battery health.
• Periodically check for firmware updates via the WebUI to ensure the latest features and security patches.

7. Troubleshooting (FAQ)

Q1: Why is my internet slow when I use it indoors?

A1: This is an outdoor portable 4G router without an external antenna. For indoor use, it may not receive outdoor signals optimally. We recommend using it outdoors or placing it in a position suitable for receiving signals indoors.

Q2: The device cannot connect to the Internet normally.

A2: You need to disable the SIM card's PIN code and manually configure the APN settings in the WebUI. Contact your SIM card operator to get the correct APN information. Refer to the 'Setup Instructions' section for detailed steps.

Q3: My router's Internet speed is slow, how can I improve it?

A3: Log in to the WebUI page and adjust the network mode to "4G Only". If indoors, try placing the router in a location with better signal reception.

Q4: Can this router work in my country?

A4: The router supports specific frequency bands (EU Version: 4G FDD-LTE: B1, B3, B7, B8, B20; 4G TDD-LTE: B38, B40; WCDMA/HSDPA/HSUPA: B1). It is designed for RU, Asia, EU, and Middle East regions. Please check your local network provider's frequency bands to ensure compatibility. You can also consult websites like www.frequencycheck.com.

Q5: Wrong or forgotten Wi-Fi password?

A5: With the router powered on, press and hold the reset button for 10-15 seconds. Wait for the router to reboot; it will restore the initial Wi-Fi password (1234567890).

Q6: Cannot recognize SIM card?

A6: Ensure the SIM card is inserted before powering up the device. Insert the SIM card into the router for one minute first, then turn on the power. Log in to the WebUI to check the SIM card status. If the issue persists, try installing a SIM card from a different operator to rule out SIM card compatibility issues.

8. Specifications

8.1. Supported Frequency Bands (EU Version)

This version is designed for Russia, Asia, EU, and Middle East regions, including countries like Ukraine, Spain, Poland, France, Italy, Netherlands, Germany, Czech Republic, Switzerland, Israel, South Korea, Brazil, India, Nigeria, Kazakhstan, etc.

• 4G FDD-LTE: B1 (2100MHz), B3 (1800MHz), B7 (2600MHz), B8 (900MHz), B20 (800MHz)
• 4G TDD-LTE: B38 (2600MHz), B40 (2300MHz)
• 3G WCDMA/HSDPA/HSUPA: B1 (2100MHz)

9. User Tips

• For optimal signal reception, especially indoors, try placing the router near a window or in an open area.
• If you experience slow speeds, ensure your router's network mode is set to "4G Only" in the WebUI.
• Always verify your SIM card's frequency bands match the router's supported bands before purchase to ensure compatibility.
• Remember to disable the PIN code on your SIM card before inserting it into the router.
• If you need to connect an external antenna for improved signal, ensure it is a TS9 type, as the router has a TS9 antenna port.

10. Warranty and Support

Your KuWFi 4G Mobile Router comes with a 1-year warranty. For any product-related issues or technical support, please contact KuWFi customer service. You can also refer to the official user manual PDF for additional details: User manual (PDF).

The product is certified with CE, ensuring compliance with European safety, health, and environmental protection requirements.