70mai Rear Cam RC14 User Manual

Introduction

The 70mai Rear Cam RC14 is an advanced rearview camera designed to seamlessly integrate with compatible 70mai Dash Cams, specifically the 70mai Dash Cam 4K Omni X800 and M800 models. This accessory expands your dash cam's functionality by providing rear-view recording capabilities, enhancing overall vehicle surveillance, and supporting parking recording features. Please read this manual carefully before installation and use to ensure optimal performance and safety.

Package Contents

Verify that all items are present in your package:

• 70mai Rear Camera RC14
• Connection Cable (6 meters)
• User Manual

Compatibility

The 70mai Rear Cam RC14 is specifically designed to work with the following 70mai Dash Cam models:

• 70mai Dash Cam 4K Omni X800
• 70mai Dash Cam M800

Ensure your main dash cam is one of these compatible models for proper functionality.

Specifications

Setup Guide

1. Choosing an Installation Location

Select a suitable location on your rear windshield. The ideal spot is typically in the upper center, ensuring a clear view of the road behind and minimizing obstruction to your rear visibility. Clean the area thoroughly before mounting.

2. Mounting the Rear Camera

1. Peel off the protective film from the adhesive pad on the camera mount.
2. Firmly press the camera onto the chosen location on the rear windshield. Hold for at least 30 seconds to ensure a strong bond.
3. Adjust the camera angle to capture the desired view.

3. Connecting to the Main Dash Cam

1. Locate the mini8pin interface on your 70mai Dash Cam (X800 or M800).
2. Connect one end of the provided 6-meter connection cable to the RC14 Rear Cam.
3. Route the cable neatly along the headliner and A-pillar, down to the main dash cam. Use cable clips (not included) if necessary to secure the cable and prevent interference with airbags or other vehicle components.
4. Connect the other end of the cable to the mini8pin port on your main 70mai Dash Cam.

Note: Ensure the main dash cam is powered off before connecting or disconnecting the rear camera cable.

Operating Instructions

Once the RC14 Rear Cam is successfully connected to your compatible 70mai Dash Cam, its operation is largely integrated with the main unit.

1. Automatic Detection

Upon powering on the main dash cam, it should automatically detect the connected RC14 Rear Cam. The dash cam's display (if applicable) or companion app will indicate that a rear camera is connected and actively recording.

2. Dual-Channel Recording

The RC14 enables dual-channel recording, meaning both the front and rear views are recorded simultaneously. These recordings are typically stored as separate files or integrated into the main dash cam's file system, depending on the dash cam model and firmware.

3. Parking Recording Support

When connected to a compatible 70mai Dash Cam (like the X800) that supports parking surveillance, the RC14 will also contribute to parking mode recording. This means that if an event (e.g., collision, motion) is detected while parked, both front and rear footage will be captured.

4. Viewing Footage

Rear camera footage can be viewed through the main dash cam's display (if available) or by connecting the dash cam to the 70mai mobile application. Refer to your main dash cam's user manual for detailed instructions on accessing and managing recorded files.

Maintenance

1. Cleaning the Lens

Regularly clean the lens of the RC14 Rear Cam to ensure clear video quality. Use a soft, lint-free cloth, slightly dampened with lens cleaner or water. Avoid abrasive materials or harsh chemicals that could scratch the lens.

2. Checking Connections

Periodically check that the connection cable between the rear cam and the main dash cam is securely plugged in. Loose connections can lead to intermittent recording or signal loss.

3. Firmware Updates

Ensure your main 70mai Dash Cam's firmware is up to date. Firmware updates often include improvements for accessory compatibility and performance. Check the 70mai app or official website for the latest firmware versions.

Troubleshooting

Problem: Rear camera is not detected by the main dash cam.

• Ensure the connection cable is securely plugged into both the RC14 and the main dash cam.
• Verify that your main dash cam model (X800 or M800) is compatible with the RC14.
• Try restarting the main dash cam.
• Check for any visible damage to the cable or connectors.

Problem: Rear camera footage is blurry or unclear.

• Clean the lens of the RC14 Rear Cam.
• Ensure the protective film (if any) has been removed from the lens.
• Check if the camera is securely mounted and not vibrating.
• Verify that the rear windshield is clean.

Problem: Parking recording is not working with the rear cam.

• Confirm that your main dash cam (X800 or M800) has parking surveillance enabled and properly configured.
• Ensure the dash cam is receiving continuous power in parking mode (e.g., via a hardwire kit, if required by your dash cam model).
• Check the sensitivity settings for parking mode on your main dash cam.

User Tips

No specific user tips were available from reviews or Q&A for this product. However, general tips for dash cam accessories include:

• Cable Management: Take your time to route the cable neatly and discreetly to avoid obstructing your view or creating a messy interior.
• Test Installation: After installation, perform a quick test drive and review footage to ensure the camera angle is correct and recording is functioning as expected.
• Regular Checks: Periodically check the camera's mounting and cable connections, especially after extreme temperature changes.

Warranty and Support

The 70mai Rear Cam RC14 comes with a 1-year warranty. For warranty claims or technical support, please contact 70mai customer service or visit their official website. Keep your proof of purchase for warranty validation.

Certification: CE, FCC