1. Introduction
The FIBOCOM FG132-GL is a high-performance 5G Redcap Sub-6 GHz wireless communication module designed for a wide range of IoT applications. It supports 3GPP Release 17 Redcap technology, offering robust dual-mode connectivity for both 5G and 4G LTE networks. This module is engineered for low latency and low power consumption, making it ideal for mid-rate IoT markets such as industrial routers, industrial PCs, IP cameras, IoT gateways, and fixed wireless access terminals.
Key benefits include dual-mode support for 5G Redcap and 4G LTE, low latency, low power consumption, and rich functionality interfaces that expand application scenarios.
2. Specifications
The FG132-GL module offers comprehensive features and robust performance. Below are the detailed specifications:
| Feature | Description |
|---|---|
| Region | Global |
| Package | MiniPCIe |
| Dimension (mm) | 30 x 51 x 3.7 |
| 5G NR SA Bands | N1/2/3/5/7/8/12/13/14/18/20/25/26/28/30/38/40/41/48/66/70/71/77/78 |
| LTE Bands | B1/2/3/4/5/7/8/12/13/14/17/18/19/20/25/26/28/30/34/38/39/40/41/42/43/48/66/71 |
| LTE-HPUE | B38/40/41/42/43 |
| Power Supply | 3.3V ~ 4.3V (Typical 3.8V) |
| Operating Temperature | -35°C ~ +75°C |
| Extended Temperature | -40°C ~ +85°C |
| ROM + RAM | 2Gb + 2Gb |
| Antenna | Main + Div + GNSS |
| 5G SA Sub-6 (256QAM) | 223Mbps (DL) / 123Mbps (UL) |
| LTE (256QAM) | 195Mbps (DL) / 75Mbps (UL) |
| Protocols | TCP/UDP/NTP/NITZ/HTTP/PING/HTTPS/SSL/FILE/MQTT/CoAP/LwM2M |
| FOTA | DFOTA |
| OS Drivers | Linux/Windows/Android |
| VoNR/VoLTE | Supported |
| GNSS | Supported |
| eSIM | Optional |
| SIM Interface | Supported |
| USB Interface | USB 2.0 |
| UART Interface | Supported |
| PCM Interface | Supported |
| I2C Interface | Supported |
| Certification | FCC/CE/GCF/PTCRB/RoHS/HF/TSCA |
| Chipset | Qualcomm SDX35 |
3. Setup and Installation
The FG132-GL is a MiniPCIe module designed for integration into compatible host devices. Follow these general steps for installation:
- Prepare the Host Device: Ensure your host device (e.g., industrial router, PC) has a free MiniPCIe slot and is powered off.
- Insert the Module: Carefully align the FG132-GL module with the MiniPCIe slot. Gently push the module into the slot until it is fully seated.
- Secure the Module: Secure the module with the appropriate screws to prevent dislodgement.
- Connect Antennas: Attach the main, diversity (DIV), and GPS antennas to their respective connectors on the module. Ensure a secure connection for optimal signal reception.
- Insert SIM Card: If your application requires cellular connectivity, insert a compatible SIM card into the module's SIM card slot.
- Power On: Once the module is securely installed and antennas are connected, power on your host device.
4. Operating Instructions
After successful installation, the FG132-GL module will be recognized by the host operating system. Drivers are available for Linux, Windows, and Android platforms.
- Driver Installation: Install the appropriate drivers for your operating system as provided by Fibocom or your host device manufacturer.
- Network Configuration: Configure network settings within your operating system or application to utilize the 5G/4G cellular connection provided by the module.
- AT Commands: The module supports Fibocom Enhanced AT Commands for advanced control and configuration. Refer to the Fibocom AT Command Reference Guide for detailed usage.
- GNSS Functionality: If GNSS is required, ensure the GPS antenna is properly connected and enable GNSS services through the module's interface or AT commands.
- Data Transmission: The module supports high-speed data transmission, up to 223Mbps downlink and 123Mbps uplink on 5G SA Sub-6, and 195Mbps downlink and 75Mbps uplink on LTE. Actual speeds may vary based on network conditions and service provider.
5. Maintenance
To ensure the longevity and optimal performance of your FG132-GL module, consider the following maintenance guidelines:
- Environmental Conditions: Operate the module within the specified temperature range (-35°C to +75°C, extended -40°C to +85°C) and avoid excessive humidity or dust.
- Firmware Updates: Regularly check for and apply Firmware Over-The-Air (FOTA) updates provided by Fibocom to ensure the module has the latest features, bug fixes, and security enhancements.
- Physical Inspection: Periodically inspect the module and antenna connections for any signs of damage or loose connections.
- Ventilation: Ensure the host device provides adequate ventilation to prevent overheating of the module.
6. Troubleshooting
If you encounter issues with your FG132-GL module, try the following troubleshooting steps:
- No Network Connectivity:
- Verify the SIM card is correctly inserted and active.
- Check antenna connections for tightness and proper placement.
- Ensure the correct drivers are installed and recognized by the operating system.
- Confirm that the module is enabled in the host device's BIOS/UEFI settings, if applicable.
- Check for network coverage in your area.
- Slow Data Speeds:
- Ensure antennas are positioned for optimal signal reception.
- Check for network congestion or limitations from your service provider.
- Verify that the module is operating in the desired 5G or 4G mode.
- GNSS Not Functioning:
- Confirm the GPS antenna is securely connected.
- Ensure GNSS functionality is enabled via software or AT commands.
- Test in an open outdoor environment for better satellite reception.
- Module Not Detected:
- Reseat the module in the MiniPCIe slot.
- Check the host device's compatibility with MiniPCIe modules.
- Ensure the host device's power supply meets the module's requirements.
7. Warranty and Support
For warranty information, technical support, and further assistance, please refer to the official Fibocom website or contact your authorized reseller. Keep your purchase receipt and module's serial number (S/N) and IMEI handy when seeking support.
