User Guide for Fibocom models including: FG360NA08, ZMOFG360NA08, ZMOFG360NA08, FG360-NA, FG360-NA 5G Wireless Modules, 5G Wireless Modules, Wireless Modules, Modules
Fibocom Wireless Inc. FG360NA08 ZMOFG360NA08 ZMOFG360NA08 fg360na08
File Info : application/pdf, 24 Pages, 917.82KB
DocumentDocumentFG360-NA Hardware Guide Version: Draft V1.0.0 Date: 2022-9-28 Applicability Type NO. Product Model Description Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 2/24 Copyright Copyright © 2021 Fibocom Wireless Inc. All rights reserved. Without the prior written permission of the copyright holder, any company or individual is prohibited to excerpt, copy any part of or the entire document, or distribute the document in any form. Notice The document is subject to update from time to time owing to the product version upgrade or other reasons. Unless otherwise specified, the document only serves as the user guide. All the statements, information and suggestions contained in the document do not constitute any explicit or implicit guarantee. Trademark The trademark is registered and owned by Fibocom Wireless Inc. Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 3/24 Change History Version Author V1.0.0 Update Date 2022-0-28 Remark Initial version Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 4/24 Contents 1 Foreword ........................................................................................................................6 1.1 Introduction..................................................................................................................... 6 2 Overview ........................................................................................................................6 2.1 Introduction..................................................................................................................... 6 2.1.1 Key Features .................................................................................................................6 2.2 Application Framework ................................................................................................... 8 2.3 Antenna Configuration.................................................................................................... 9 2.4 Waring ............................................................................................................................ 9 2.4.1 Important Notice to OEM integrators .............................................................................9 2.4.2 FCC Statement ............................................................................................................10 3 Pin Definition ...............................................................................................................12 3.1 Pin Map ........................................................................................................................ 12 3.1.1 Table of Pin No. and Pin Name....................................................................................13 3.1.2 Pin Definition................................................................................................................15 4 Structural Specification ..............................................................................................23 4.1 Product Appearance..................................................................................................... 23 4.2 Dimension of Structure ................................................................................................. 23 4.3 Storage......................................................................................................................... 24 4.4 Packing......................................................................................................................... 24 Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 5/24 1 Foreword 1.1 Introduction The document describes the electrical characteristics, RF performance, dimensions and application environment, etc. of FG360-NA (hereinafter referred to as FG360). With the assistance of the document and other instructions, the developers can quickly understand the hardware functions of FG360 modules and develop products. 2 Overview 2.1 Introduction The FG360 series module is a 5G module which supports NSA and SA network architectures. The FG360 integrates core devices such as Baseband, Memory, PMU, Transceiver, and PA. It supports 5G NR Sub6, FDD-LTE, and TDD-LTE long-distance communication modes. Supports uplink 2×2 MIMO and downlink 4×4 MIMO multi-antenna configuration in SA mode. It also supports GNSS wireless positioning technology. The FG360 is designed in an LGA package and is suitable for a variety of eMBB scenarios, such as CPE, VR/AR, gateway, TV box, and intelligent monitoring. 2.1.1Key Features Table 2-1 Key features Performance Description LTE FDD: B2, B4, B5, B12, B25, B48, B66, B71 Operating Band LTE TDD: B41, B48 NR: n25, n41, n48, n66, n71, n77 GNSS Support GPS, GLONASS, Galileo, BDS, QZSS NR 3GPP Release 15 LTE Feature 3GPP Release 15 NR: DL 4×4 MIMO: n25, n41, n48, n66, n71, n77 UL 2×2MIMO: n41, n77 LTE: DL 4×4MIMO: B2, B4, B25, B41, B48, B66, B71 Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 6/24 Data Transmission Power Supply Temperature Physical characteristics CPU Memory NSA and SA supported SRS: n41, n77 Support: 1T2R, 1T4R, 2T4R HPUE: B41, n41, n77 SA 5G/NR Sub-6 Peak DL 4.43Gbps/UL 1.25Gbps NSA Peak DL 3.74Gbps/UL 700Mbps LTE DL 1.6Gbps (CAT19)/UL 211Mbps (CAT18) DC: 3.3~4.4V, typical voltage: 3.8V Normal operating temperature: -30~751 Extended operating temperature: -40~852 Storage temperature: -40~85 Dimension: 41 mm×44mm×2.75 mm Package: 430 pin LGA Weight: about 12.0 g ARM Cortex-A55, quad core, up to 2.0 GHz 2GB LPDDR4x+32GB eMMC Flash Interface USB Interface PCIe Interface SIM Interface I2C ADCs USB2.0 high speed (HS) interface, data transmission rate up to 480Mbps USB3.0 Super-speed (SS) interface, data transmission rate up to 5Gbps PCIe Gen3 2Lane×1, PCIe Gen3 1Lane×2 (PCIe only support RC mode) Dual SIM: 1.8V/3V SIM1: USIM SIM2: ESIM/USIM One set of I2C interface, data transmission rate up to 400Kbit/s A/D conversion channel, Voltage Range: 0~1.45V Software Firmware update USB/PCIe/FOTA Operating System Linux/Android/Windows Note 1. When temperature keeps in the range of -30~75°C, the module can work normally. Module performance meets the 3GPP specifications. 2. When temperature keeps in the range of -40~85°C, module performance may be slightly out of 3GPP specifications. Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 7/24 2.2 Application Framework The application framework below shows the main hardware functions of the FG360 module: Baseband RF transceiver PMU Memory Peripheral interface ANT0 ANT1 ANT2 ANT3 ANT4 ANT5 GNSS VBAT PWRKEY RESET_N ET TRX Blocks Main PMU RFCLK 26MHz TX RX RFFE Transceiver eMCP LPDDR4X eMMC Sub PMU 26MHz Crystal SPMI Sleep CLK 32KHz BBCLK 26MHz RFFE DRF Baseband USIM1 eSIM JTAG GPIO/EINT Coex UART SDIO SGMII SPI DSI I2C I2S PCIe3.0 USB2.0/3.0 UART ADCs MIPI Figure 2-1 Hardware block diagram Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 8/24 2.3 Antenna Configuration FG360 module supports seven antennas and the configuration is as below table: PAD Function Band Configuration(TX) Band Description 130 LB TRX MHB sec TRX B2/4/5/12/25/41/48/66/71 n25/41/48/66/71/77 Configuration(RX) B2/4/5/12/25/41/48/66/71 n25/41/48/66/71/77 175 MHB TRX B2/4/25/41/48/66 LB RX n25/41/48/66/77 B2/4/25/41/48/66/71 n25/41/48/66/71/77 157 LMHB Rx Only SRS B2/4/25/66/71 n25/66/71 139 LMHB Rx Only SRS B2/4/5/12/66/71 n25/66/71 148 HUB Rx Only SRS B41/48 n41/48/77 193 HUB Rx Only SRS B41/48 n41/48/77 199 GNSS GNSS receive Frequency Range(MHz) 617~4200 617~4200 617~2200 617~2200 2496~4200 2496~4200 2.4 Waring 2.4.1 Important Notice to OEM integrators 1. This module is limited to OEM installation ONLY. 2. This module is limited to installation in fixed applications, according to Part 2.1091(b). 3. The separate approval is required for all other operating configurations, including portable configurations with respect to Part 2.1093 and different antenna configurations 4. For FCC Part 15.31 (h) and (k): The host manufacturer is responsible for additional testing to verify compliance as a composite system. When testing the host device for compliance with Part 15 Subpart B, the host manufacturer is required to show compliance with Part 15 Subpart B while the transmitter module(s) are installed and operating. The modules should be transmitting and the evaluation should confirm that the module's intentional emissions are compliant (i.e. fundamental and out of band emissions). The host manufacturer must verify that there are no additional unintentional emissions other than what is permitted in Part 15 Subpart B or emissions are complaint with the transmitter(s) rule(s). The Grantee will provide guidance to the host manufacturer for Part 15 B requirements if needed. Important Note Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 9/24 notice that any deviation(s) from the defined parameters of the antenna trace, as described by the instructions, require that the host product manufacturer must notify to Fibocom Wireless Inc. that they wish to change the antenna trace design. In this case, a Class II permissive change application is required to be filed by the USI, or the host manufacturer can take responsibility through the change in FCC ID (new application) procedure followed by a Class II permissive change application. End Product Labeling When the module is installed in the host device, the FCC/IC ID label must be visible through a window on the final device or it must be visible when an access panel, door or cover is easily re-moved. If not, a second label must be placed on the outside of the final device that contains the following text: "Contains FCC ID: ZMOFG360NA08" The FCC ID can be used only when all FCC mpliance requirements are met. Antenna Installation (1) The antenna must be installed such that 20 cm is maintained between the antenna and users, (2) The transmitter module may not be co-located with any other transmitter or antenna. (3) Only antennas of the same type and with equal or less gains as shown below may be used with this module. Other types of antennas and/or higher gain antennas may require additional authorization for operation. (4)The max allowed antenna gain is 3.76dBi for external monopole antenna. In the event that these conditions cannot be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID/IC ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC/IC authorization. Manual Information to the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user's manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. 2.4.2 FCC Statement Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 10/24 (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device is intended only for OEM integrators under the following conditions: (For module device use) 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body. Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 11/24 3 Pin Definition The FG360 module applies LGA interface with 430 pins. 3.1 Pin Map 391 133 136 139 142 145 148 151 154 157 160 163 166 169 172 175 178 181 184 187 190 193 195 194 392 134 137 140 143 146 149 152 155 158 161 164 167 170 173 176 179 182 185 188 191 135 138 141 144 147 150 153 156 159 162 165 168 171 174 177 180 183 186 189 192 196 197 199 198 200 202 201 203 412 205 204 206 413 208 207 209 414 211 210 212 415 214 213 215 416 217 216 218 417 220 219 221 418 223 222 224 419 226 225 227 420 229 228 230 421 232 231 233 422 235 234 236 423 238 237 239 424 241 240 242 425 244 243 245 426 247 246 248 427 250 249 251 428 253 252 254 429 256 255 257 430 259 258 260 262 261 263 264 298 132 131 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 129 130 128 126 127 411 125 123 124 299 300 301 302 303 304 305 306 307 410 122 120 121 409 119 117 118 308 309 310 311 312 313 314 315 316 408 116 114 115 317 318 319 320 321 322 323 324 325 407 113 111 112 406 110 108 109 326 327 328 329 330 331 332 333 334 405 107 105 106 404 104 102 103 335 336 337 338 339 340 341 342 343 403 101 99 100 344 345 346 347 348 349 350 351 352 402 98 96 97 401 95 93 94 353 354 355 356 357 358 359 360 361 400 92 90 91 399 89 87 88 362 363 364 365 366 367 368 369 370 398 86 84 85 397 83 81 82 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 396 80 78 79 395 77 75 76 394 74 72 73 393 71 69 70 68 66 67 281 280 279 278 277 276 275 274 273 272 271 270 269 268 267 266 65 64 265 9 60 57 54 51 48 45 42 39 36 33 30 27 24 21 18 15 12 6 3 62 63 59 56 53 50 47 44 41 38 35 32 29 26 23 20 17 14 11 8 10 5 2 390 61 58 55 52 49 46 43 40 37 34 31 28 25 22 19 16 13 389 7 4 1 Power Pins PCIe Pins ADC Pins CTL Pins GND Pins LCD Pins UART Pins SGMII Pins GPIO Pins (U)SIM Pins SPI Pins GRFC&RFFE RESERVED/NC Pins USB Pins ANT Pins I2S Pins Figure 3-1 Pin map I2C Pins BT&WIFI Pins SDIO Pins CLOCK Pins Note The pin "RESERVED" means that the position pin is reserved and does not need to be connected. Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 12/24 3.1.1 Table of Pin No. and Pin Name Table 3-1 Table of pin no. and pin name No. PIN Name No. PIN Name No. PIN Name No. 1 PWRKEY 2 PON_1 3 CLK_OUT 4 6 SPI0_CSB 7 SIM1_VDD 8 SPI0_MOSI 9 11 SIM2_RST 12 SIM2_DATA 13 SIM1_CLK 14 16 SIM1_RST 17 SGMII_1_TXN 18 SIM2_VDD 19 21 SGMII_0_TXP 22 SGMII_1_RXN 23 RESERVED 24 26 PCIE_B_LN0_TXN 27 EINT17 28 GBE0_RST 29 31 GND 32 RESERVED 33 PCIE_B_LN0_RXN 34 37 PCIE_A_CLKP 38 PCIE_D_LN0_TXP 39 PCIE_D_LN0_TXN 40 42 GND 43 PCIE_A_LN0_TXP 44 PCIE_D_LN0_RXN 45 47 SDC_CMD 48 RESERVED 49 PCIE_A_LN0_RXP 50 52 GND 53 SDC_DATA1 54 SDC_DATA3 55 57 VBUS_DET 58 SSUSB_TXP 59 USB_DM 60 62 USB_DP 63 SSUSB_RXP 64 AP_URTS1 65 67 PCIE_B_PEWAKEN 68 G3BE1_RST 69 MDIO 70 72 LSDA 73 AP_URXD1 74 LSDI 75 77 84~89 96 101 AP_UTXD1 VBAT_RF PCM0_CLK I2S0_BCK 78 90~92 97 102 LRSTB GND PCM0_DO PTA_RX 79 AP_UCTS1 80 93 PCM0_SYNC 94 98 CDC_RESET_N 99 103 I2S0_DO 104 106 NET_STATUS 107 AUDIO_PWR_EN 108 STATUS 109 111 SLEEP_IND 112 I2C_SCL0 116 ANTCTL3 117 IRIG_B 122 GND 123 EINT20 129 DBG_UART_TX 130 ANT8_M 113 WAKEUP_IN 114 118~119 GND 120 124~125 GND 126 131~134 GND 135 138 BT_URXD 139 ANT7_D 140 GND 141 144 EINT16 145~147 GND 148 ANT6 149 151~152 GND 153 BT_ACT_TXD 154~155 GND 156 158 GND 159 USB_DRVBUS 160~161 GND 162 PIN Name No. PIN Name SYS_RESIN_N 5 SPI0_MISO SPI0_CLK 10 SIM1_DATA SIM1_DET 15 SIM2_CLK GND 20 SGMII_1_TXP SGMII_0_TXN 25 SGMII_1_RXP PCIE_B_LN0_TXP 30 PCIE_B_LN0_RXP PCIE_A_CLKN 35~36 GND PCIE_A_LN0_TXN 41 PCIE_D_LN0_RXP SDC_CLK 46 PCIE_A_LN0_RXN GND 51 SDC_DATA2 SSUSB_TXN 56 SDC_DATA0 USB_ID 61 SSUSB_RXN GBE1_INT 66 MDC PCIE_B_CLKREQN 71 LSCE0B LSA0 76 PCIE_B_PERSTN LSCK 81~83 GND I2S0_MCK 95 PCM0_DI PTA_TX 100 CDC_INT1_N I2S0_DI 105 I2S0_LRCK W_DISABLE 110 NET_MODE ISINK1 115 I2C_SDA0 GPS_PPS 121 NC DBG_UART_RX 127~128 GND BT_UTXD 136~137 GND DSI_TE 142~143 GND GND 150 BT_PRI_RXD DISP_PWM 157 ANT5_M2 GPIO78/ 163~164 PCIE_D_CLKREQN GND Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 13/24 No. PIN Name No. PIN Name No. PIN Name No. PIN Name No. PIN Name 165 NC 166 NC 167 GND 168 NC 169~170 GND 171 NC 172~173 GND 174 NC 175 ANT3_M1 176 GND 177 NC 178~179 GND 180 LCD_PWR_EN2 181~182 GND 183 TDI 184 NC 185 GND 186 TCK 187~188 GND 189 TDO 190~192 GND 193 ANT1 194~197 GND 198 MIPI1_D_SDATA 199 ANT10_GNSS 200 GND 201 MIPI1_D_SCLK 202~203 GND 204 ANTCTL2 205 NC 206 GND 207 ANTCTL1 208 GND GPIO76/ 209 210 ANTCTL0 PCIE_D_PERSTN 211 SDIO_VDD 212 EINT15 213~215 GND 216 MIPI2_D_SDATA 217 RESERVED 218 GND 219 MIPI2_D_SCLK 220~222 GND 223 RESERVED 224 GND 225 VDD_EXT_1V8 226~228 GND 229 RESERVED 230 GND 231 NC 232~234 GND 235 RESERVED 236 GND 237 RESERVED 238~239 GND 240~241 RESERVED 242 GND 243 RESERVED 244~245 GND 246~247 RESERVED 248 GND 249 ADC0 250~251 GND 252 ADC1 253 RESERVED 254 GND 255 NC 256~258 GND 259 RESERVED 260 GND 261 VBAT_BB 262 GND 263~264 VBAT_BB 265 PCIE_D_CLKN 266 GND 267 SIM2_DET 268 SGMII_0_RXP 269 SGMII_0_RXN 270 SGMII_PWR_EN1 271 PCIE_B_CLKP 272 PCIE_B_CLKN 273 USB_BOOT 274 PCIE_A_PEWAKEN 275 PCIE_A_PERSTN 276 PCIE_A_CLKREQN 277 GND 278 GBE0_INT 279 EINT18 280 SDC_DET 281 SD_PWR_EN 282 BT_URTS 283 BT_UCTS 284 GND GPIO77/ 285 286 WIFI_GPIO1 PCIE_D_PEWAKEN 287 WLAN_ACT 288 LCM_RST 289 GND 290 NC 291 WIFI_GPIO2 292 NC 293 RESERVED 294 NC 295 TRST_N 296 TMS 297 SYSRSTB 298 LCD_PWR_EN1 299~392 GND 393 PCIE_C_LN0_RXN 394 PCIE_C_LN0_RXP 395 PCIE_C_LN0_TXP 396 PCIE_C_LN0_TXN 397~398 GND 399 PCIE_C_CLKP 400 PCIE_C_CLKN 401 PCIE_C_PERSTN 402 PCIE_C_CLKREQN 403 PCIE_C_PEWAKEN 404 DSI0_D0P 405 DSI0_D0N 406 DSI0_CKN 407 DSI0_CKP 408 DSI0_D1N 409 DSI0_D1P 410~425 NC 426 RESERVED 427 RESERVED 428 RESERVED 429 RESERVED 430 RESERVED Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 14/24 3.1.2 Pin Definition Table 3-2 IO Parameter definition Type PI PO DI DO DIO AI AO AIO OD PU PD Hi-Z Description Power Input Power Output Digital Input Digital Output Digital Input/Output Analog Input Analog Output Analog Input/Output Open Drain Internal pull up Internal pull down High impedance Table 3-3 LGA pin description Pin Name Power VBAT_BB VBAT_RF VDD_EXT_1V8 USB Pin No. Type 261 263, 264 PI 84, 85, 86, 87, PI 88, 89 225 PO SSUSB_TXN 55 AO SSUSB_TXP 58 AO SSUSB_RXN 61 AI SSUSB_RXP 63 AI USB_DM 59 AIO USB_DP 62 AIO VBUS_DET 57 DI USB_DRVBUS 159 DO USB_ID 60 DI USIM Power Domain Reset Value Pin Description - - Baseband power input - - RF power input - - 1.8V power output - - - - - - - - - - - - - - VDD_EXT_1V8 PD VDD_EXT_1V8 PD USB super speed transmit data minus USB super speed transmit data plus USB super speed receive data minus USB super speed receive data plus USB high speed data minus USB high speed data plus USB VBUS detection USB OTG power enable USB ID Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 15/24 Pin Name SIM1_VDD SIM1_DATA SIM1_CLK SIM1_RST SIM1_DET SIM2_VDD Pin No. 7 10 13 16 14 18 SIM2_DATA 12 SIM2_CLK 15 SIM2_RST 11 SIM2_DET 267 GPIO W_DISABLE 109 WAKEUP_IN 113 NET_STATUS 106 NET_MODE 110 SLEEP_IND 111 STATUS 108 IRIG_B 117 GPS_PPS 120 ISINK1 114 ANT ANT1 193 NC 184 ANT3_M1 175 NC 166 ANT5_M2 157 ANT6 148 ANT7_D 139 ANT8_M 130 NC 121 ANT10_GNSS 199 NC 205 ANT Tuner Control MIPI1_D_SDATA 198 MIPI1_D_SCLK 201 MIPI2_D_SDATA 216 Type PO DIO DO DO DI PO DIO DO DO DI Power Domain Reset Value Pin Description - - SIM1 power supply,3V/1.8V SIM1_VDD PD SIM1 data input/output SIM1_VDD PD SIM1 clock signal SIM1_VDD PD SIM1 reset signal VDD_EXT_1V8 PD SIM1 detect signal - - SIM2 power supply,3V/1.8V, Reserved SIM2_VDD PD SIM2 data input/output, Reserved SIM2_VDD PD SIM2 clock signal, Reserved SIM2_VDD PD SIM2 reset signal, Reserved VDD_EXT_1V8 PD SIM2 detect, Reserved DI VDD_EXT_1V8 PD DI VDD_EXT_1V8 PD DO VDD_EXT_1V8 PD DO VDD_EXT_1V8 PD DO VDD_EXT_1V8 PD DO VDD_EXT_1V8 PD DO VDD_EXT_1V8 PD DO VDD_EXT_1V8 PD AI VBAT_BB HI-Z Module airplane mode control signal Module wake up input from host Module network status indication Module network mode indication Module output to wake up host Module current working status indication B code output PPS signal output LED negative drive signal AIO - AIO - AIO - AIO - AIO - AIO - AIO - AIO - AIO - AI - AIO - - UCB TRx - NC - 41 TRx + MHB/UCB/LAA Rx - NC - MHB/UCB/LAA Rx - UCB TRx - LMHB Rx - LMH TRX - NC - GNSS antenna - NC DIO VDD_EXT_1V8 PD DO VDD_EXT_1V8 PD DIO VDD_EXT_1V8 PD External Tuner MIPI Control Data Pin External Tuner MIPI Control Clock Pin External Tuner MIPI Control Data Pin Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 16/24 Pin Name MIPI2_D_SCLK ANTCTL0 ANTCTL1 ANTCTL2 ANTCTL3 Module Control PWRKEY SYS_RESIN_N PON_1 EINT20 Pin No. 219 210 207 204 116 1 4 2 123 USB_BOOT 273 SD SDC_CMD 47 SDC_DATA1 53 SDC_DATA0 56 SDC_CLK 45 SDC_DATA2 51 SDC_DATA3 54 SDC_DET 280 SD_PWR_EN 281 SDIO_VDD 211 SGMII SGMII_1_RXN 22 SGMII_1_RXP 25 SGMII_1_TXN 17 SGMII_1_TXP 20 GBE1_INT 65 GBE1_RST 68 SGMII_0_RXN 269 SGMII_0_RXP 268 SGMII_0_TXN 24 SGMII_0_TXP 21 Type DO DO DO DO DO Power Domain VDD_EXT_1V8 1.8V 1.8V 1.8V 1.8V Reset Value PD PD PD PD PD Pin Description External Tuner MIPI Control Clock Pin Antenna control signal 0 Antenna control signal 1 Antenna control signal 2 Antenna control signal 3 DI 1.8V PU DI 1.8V PU DI VBAT_BB PU DI VDD_EXT_1V8 PD DI VDD_EXT_1V8 PD Module power-key control signal Module reset control signal Module power on signal MT6890 interruput input signal, used for WPS key input signal Force into USB download boot mode DIO SDIO_VDD PD DIO SDIO_VDD PD DIO SDIO_VDD PD DO SDIO_VDD PD DIO SDIO_VDD PD DIO SDIO_VDD PD DI VDD_EXT_1V8 PD DO VDD_EXT_1V8 PD PO - - SDC interface command signal SDC interface DATA1 signal SDC interface DATA0 signal SDC interface clock signal SDC interface DATA2 signal SDC interface DATA3 signal SD card insert detection SD card power supply enable SDC interface I/O power domain AIO AVDD12_SGMI I AIO AVDD12_SGMI I AIO AVDD12_SGMI I AIO AVDD12_SGMI I DI VDD_EXT_1V8 PD DO VDD_EXT_1V8 PD AIO AVDD12_SGMI I - AIO AVDD12_SGMI I - AIO AVDD12_SGMI I - AVDD12_SGMI AIO I - SGMII 1 receive data minus SGMII 1 receive data plus SGMII 1 transmit data minus SGMII 1 transmit data plus SGMII 1 interrupt input signal SGMII 1 reset signal SGMII 0 receive data minus SGMII 0 receive data plus SGMII 0 transmit data minus SGMII 0 transmit data plus Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 17/24 Pin Name Pin No. GBE0_INT 278 GBE0_RST 28 SGMII_PWR_EN1 270 MDIO 69 MDC 66 PCIE PCIE_A_CLKN 34 PCIE_A_CLKP 37 PCIE_A_LN0_TXN 40 PCIE_A_LN0_TXP 43 PCIE_A_LN0_RXN 46 PCIE_A_LN0_RXP 49 PCIE_A_PEWAKEN 274 PCIE_A_PERSTN 275 PCIE_A_CLKREQN 276 PCIE_B_CLKN 272 PCIE_B_CLKP 271 PCIE_B_LN0_TXN 26 PCIE_B_LN0_TXP 29 PCIE_B_LN0_RXN 33 PCIE_B_LN0_RXP 30 PCIE_B_PEWAKEN 67 PCIE_B_PERSTN 76 PCIE_B_CLKREQN 70 PCIE_C_CLKN 400 PCIE_C_CLKP 399 PCIE_C_LN0_TXN 396 PCIE_C_LN0_TXP 395 PCIE_C_LN0_RXN 393 PCIE_C_LN0_RXP 394 PCIE_C_PEWAKEN 403 PCIE_C_PERSTN 401 PCIE_C_CLKREQN 402 PCIE_D_CLKN 3 PCIE_D_CLKP 265 PCIE_D_LN0_TXN 39 PCIE_D_LN0_TXP 38 PCIE_D_LN0_RXN 44 PCIE_D_LN0_RXP 41 GPIO76/ PCIE_D_PERSTN 209 GPIO77/ 285 PCIE_D_PEWAKEN Type DI DO DO DIO DO Power Domain VDD_EXT_1V8 VDD_EXT_1V8 VDD_EXT_1V8 VDD_EXT_1V8 VDD_EXT_1V8 Reset Value PD PD PD PD PD Pin Description SGMII 0 interrupt input signal SGMII 0 reset signal SGMII power supply enable 1 SGMII MDIO signal SGMII MDC signal AIO AVDD12_PCIE AIO AVDD12_PCIE AIO AVDD12_PCIE AIO AVDD12_PCIE AIO AVDD12_PCIE AIO AVDD12_PCIE DI VDD_EXT_1V8 PU DO VDD_EXT_1V8 PU DIO VDD_EXT_1V8 PU AIO AVDD12_PCIE AIO AVDD12_PCIE AIO AVDD12_PCIE AIO AVDD12_PCIE AIO AVDD12_PCIE AIO AVDD12_PCIE DI VDD_EXT_1V8 PU DO VDD_EXT_1V8 PU DIO VDD_EXT_1V8 PU AIO AVDD12_PCIE AIO AVDD12_PCIE AIO AVDD12_PCIE AIO AVDD12_PCIE AIO AVDD12_PCIE AIO AVDD12_PCIE DI VDD_EXT_1V8 PU DO VDD_EXT_1V8 PU DIO VDD_EXT_1V8 PU AIO AVDD12_PCIE - AIO AVDD12_PCIE - AIO AVDD12_PCIE AIO AVDD12_PCIE AIO AVDD12_PCIE AIO AVDD12_PCIE - DI VDD_EXT_1V8 PD DO VDD_EXT_1V8 PD PCIe A reference clock minus PCIe A reference clock plus PCIe A Tx0 minus PCIe A Tx0 plus PCIe A Rx0 minus PCIe A Rx0 plus PCIe A wake-up signal PCIe A reset signal PCIe A clock request signal PCIe B reference clock minus PCIe B reference clock plus PCIe B Tx0 minus PCIe B Tx0 plus PCIe B Rx0 minus PCIe B Rx0 plus PCIe B wake-up signal PCIe B reset signal PCIe B clock request signal PCIe C reference clock minus PCIe C reference clock plus PCIe C Tx0 minus PCIe CTx0 plus PCIe C Rx0 minus PCIe C Rx0 plus PCIe C wake-up signal PCIe C reset signal PCIe C clock request signal PCIe D reference clock minus, Reserved PCIe D reference clock plus, Reserved PCIe D Tx0 minus, Reserved PCIe D Tx0 plus, Reserved PCIe D Rx0 minus, Reserved PCIe D Rx0 plus, Reserved MT6890 GPIO, used for 2+2+4 and 4+4+4 WIFI/BT and RF co-exist control signals MT6890 GPIO, used for 2+2+4 and 4+4+4 WIFI/BT Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 18/24 Pin Name Pin No. GPIO78/ PCIE_D_CLKREQN 162 JTAG TDI 183 TCK 186 TDO 189 TRST_N 295 TMS 296 SYSRSTB 297 I2C I2C_SDA0 115 I2C_SCL0 112 I2S I2S0_DO 103 I2S0_MCK 94 I2S0_DI 104 I2S0_BCK 101 I2S0_LRCK 105 ADC ADC0 249 ADC1 252 Debug UART DBG_UART_TX 129 DBG_UART_RX 126 UART AP_UCTS1 79 AP_URTS1 64 AP_UTXD1 77 AP_URXD1 73 SPI SPI0_MISO 5 SPI0_MOSI 8 SPI0_CSB 6 SPI0_CLK 9 AUDIO CODEC CDC_RESET_N 98 CDC_INT1_N 100 Type DO Power Domain VDD_EXT_1V8 Reset Value PD Pin Description and RF co-exist control signals MT6890 GPIO, used for 2+2+4 and 4+4+4 WIFI/BT and RF co-exist control signals DI VDD_EXT_1V8 PD DI VDD_EXT_1V8 PD DO VDD_EXT_1V8 PD DI VDD_EXT_1V8 PD DI VDD_EXT_1V8 PD DI VDD_EXT_1V8 PD JTAG TDIReserved JTAG TCKReserved JTAG TDOReserved JTAG TRSTReserved JTAG TMSReserved System resetReserved DIO VDD_EXT_1V8 PU DO VDD_EXT_1V8 PU DO VDD_EXT_1V8 PD DO VDD_EXT_1V8 PD DI VDD_EXT_1V8 PD DO VDD_EXT_1V8 PD DO VDD_EXT_1V8 PD AI VDD_EXT_1V8 - AI VDD_EXT_1V8 - DO VDD_EXT_1V8 PU DI VDD_EXT_1V8 PU DI VDD_EXT_1V8 PD DO VDD_EXT_1V8 PD DO VDD_EXT_1V8 PD DI VDD_EXT_1V8 PD DI VDD_EXT_1V8 PD DO VDD_EXT_1V8 PD DO VDD_EXT_1V8 PD DO VDD_EXT_1V8 PD DO VDD_EXT_1V8 PD DI VDD_EXT_1V8 PD I2C data I2C clock I2S data output signal I2S clock output signal I2S data input signal I2S data bit clock signal I2S frame clock signal A/D conversion channel 0 A/D conversion channel 1 Debug UART data transmission Debug UART data reception UART receive ready signal UART transmit request signal UART transmit signal UART receive signal SPI interface input signal SPI interface output signal SPI interface chip select signal SPI interface clock signal External CODEC reset signal External CODEC interrupt signal Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 19/24 Pin Name AUDIO_PWR_EN LCD Pin No. 107 LSCK 80 LSDA 72 LSA0 75 LSCE0B 71 LSDI 74 LRSTB 78 DSI_TE 141 DISP_PWM 156 LCM_RST 288 LCD_PWR_EN1 298 LCD_PWR_EN2 180 DSI0_CKN 406 DSI0_CKP 407 DSI0_D0N 405 DSI0_D0P 404 DSI0_D1N 408 DSI0_D1P 409 WIFI/BT BT_UTXD 135 BT_URXD 138 Type DO Power Domain Reset Value Pin Description VDD_EXT_1V8 PD External CODEC power enable DO VDD_EXT_1V8 PD DO/DI VDD_EXT_1V8 PD DO VDD_EXT_1V8 PD DO VDD_EXT_1V8 PD DI VDD_EXT_1V8 PD DO VDD_EXT_1V8 PD DI VDD_EXT_1V8 PD DO VDD_EXT_1V8 PD DO VDD_EXT_1V8 PD DO VDD_EXT_1V8 PD DO VDD_EXT_1V8 PD AIO AVDD12_DSI AIO AVDD12_DSI AIO AVDD12_DSI AIO AVDD12_DSI AIO AVDD12_DSI AIO AVDD12_DSI - CLK signal for DBI-C serial 3/4 wire SPI LCD, connect to LCD CLK signal Data signal for DBI-C serial 3/4 wire SPI LCD. For type interface I LCD, is data input/output signal. For type interface II LCD, is data output signal from FG360 module and connect to LCD data in signal RS signal for DBI-C serial 4 wire SPI LCD, DBI-C serial 3 wire SPI LCD not has this signal CS signal for DBI-C serial 3/4 wire SPI LCD, connect to LCD CS signal Data signal for DBI-C serial 3/4 wire SPI LCD. For type interface II LCD, is data input signal from FG360 module and connect to LCD data output signal. For type interface I LCD, not has this signal Reset signal for DBI-C serial 3/4 wire SPI LCD, connect to LCD RST signal LCD frame synchronization signal LCD Backlight control PWM signal DSI LCD reset signal LCD power supply enable 1 LCD power supply enable 2 DSI LCD MIPI CLK minus DSI LCD MIPI CLK plus DSI LCD MIPI lane0 minus DSI LCD MIPI lane0 plus DSI LCD MIPI lane1 minus DSI LCD MIPI lane1 plus DO VDD_EXT_1V8 PD DI VDD_EXT_1V8 PD UART TX signal UART RX signal Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 20/24 Pin Name BT_URTS BT_UCTS PCM0_DO PCM0_DI PCM0_CLK PCM0_SYNC EINT16 EINT17 EINT18 EINT15 BT_PRI_RXD BT_ACT_TXD WLAN_ACT PTA_TX PTA_RX WIFI_GPIO1 WIFI_GPIO2 MMW NC NC NC NC NC NC NC NC NC NC NC NC Reserved RESERVED NC Pin No. 282 283 97 95 96 93 144 27 279 212 150 153 287 99 102 286 291 Type DO DI DO DI DO DO DO DO DO DI DI DO DI DO DI DIO DIO Power Domain Reset Value Pin Description VDD_EXT_1V8 PD UART RTS signal VDD_EXT_1V8 PD UART CTS signal VDD_EXT_1V8 PD PCM data output VDD_EXT_1V8 PD PCM data input VDD_EXT_1V8 PD PCM clock output VDD_EXT_1V8 PD PCM synchronization signal MT6890 GPIO, used for VDD_EXT_1V8 PD control WIFI RESET signal or WIFI Power enable signal MT6890 GPIO, used for VDD_EXT_1V8 PD control WIFI RESET signal or WIFI Power enable signal MT6890 GPIO, used for VDD_EXT_1V8 PD control WIFI RESET signal or WIFI Power enable signal VDD_EXT_1V8 PD Interrupt input signal, used as WLAN_EN VDD_EXT_1V8 PD WIFI/BT and RF co-exist control signals VDD_EXT_1V8 PD WIFI/BT and RF co-exist control signals VDD_EXT_1V8 PD WIFI/BT and RF co-exist control signals VDD_EXT_1V8 PD WIFI/BT and RF co-exist control signals VDD_EXT_1V8 PD WIFI/BT and RF co-exist control signals VDD_EXT_1V8 PD WIFI control signal 1, Reserved VDD_EXT_1V8 PD WIFI control signal 2, Reserved 237 - - 223 - - 217 - - 240 - - 235 - - 229 - - 243 - - 247 - - 241 - - 246 - - 259 - - 253 - - - Reserved - Reserved - Reserved - Reserved - Reserved - Reserved - Reserved - Reserved - Reserved - Reserved - Reserved - Reserved 23, 32, 48, - - 293,426~430 - - Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 21/24 Pin Name NC Pin No. 165,168,171, 174,177,231, 255,290,292, 294,410~425 Type - Power Domain Reset Value Pin Description - - - Pin Name GND GND Pin No. 19, 31, 35, 36, 42, 50, 52, 81, 82, 83, 90, 91, 92, 118, 119, 122, 124, 125, 127, 128, 131, 132, 133, 134, 136, 137, 140, 142, 143, 145, 146, 147, 149, 151, 152, 154, 155, 158, 160, 161, 163, 164, 167, 169, 170, 172, 173, 176, 178, 179, 181, 182, 185, 187, 188, 190, 191, 192, 194, 195, 196, 197, 200, 202, 203, 206, 208, 213, 214, 215, 218, 220, 221, 222, 224, 226, 227, 228, 230, 232, 233, 234, 236, 238, 239, 242, 244, 245, 248, 250, 251, 254, 256, 257, 258, 260, 262, 266, 277, 284, 289, 299, 300, 301, 302, 303, 304, 305, 306, 307, 308, 309, 310, 311, 312, 313, 314, 315, 316, 317, 318, 319, 320, 321, 322, 323, 324, 325, 326, 327, 328, 329, 330, 331, 332, 333, 334, 335, 336, 337, 338, 339, 340, 341, 342, 343, 344, 345, 346, 347, 348, 349, 350, 351, 352, 353, 354, 355, 356, 357, 358, 359, 360, 361, 362, 363, 364, 365, 366, 367, 368, 369, 370, 371, 372, 373, 374, 375, 376, 377, 378, 379, 380, 381, 382, 383, 384, 385, 386, 387, 388, 389, 390, 391, 392, 397,398 Note 1. The PWRKEY and SYS_RESIN_N pins have internal pull-up, and the pull-up power supply is in exclusive mode; no external pull-up is required; PON_1 pin module with weak pull-down, maximum input voltage must not exceed VBAT_BB. Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 22/24 4 Structural Specification 4.1 Product Appearance The appearance of the FG360 module product is as shown: Figure 4-1 Module product appearance 4.2 Dimension of Structure The structural dimensions of the FG360 module are shown in the figure: Figure 4-2 Structure size chart Note Unmarked dimensional tolerances are 0.1mm. Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 23/24 4.3 Storage Refer to FIBOCOM FG360-NA Series SMT Design Guide. 4.4 Packing Refer to FIBOCOM FG360-NA Series SMT Design Guide. Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 24/24Microsoft Word for Microsoft 365