Lemorele Wireless HDMI Extender

Contents

Lemorele Wireless HDMI Extender Instruction Manual

Models: R1000, R2020, R1010, R1030, R1040, R800

1. Introduction

The Lemorele Wireless HDMI Extender is designed to provide seamless wireless video transmission, supporting Full HD 1080P at 60Hz with low latency. This device is ideal for various applications including live streaming, video production, presentations, and home entertainment. It features dual-band Wi-Fi (2.4G/5G) with adaptive frequency hopping for stable connections and supports real-time monitoring via the TuTuPlay mobile application.

This manual provides detailed instructions for setting up, operating, and maintaining your Wireless HDMI Extender. Please read it thoroughly before use.

2. Safety Information

  • Ensure the device is used within its specified operating temperature and humidity ranges.
  • Do not expose the device to water or excessive moisture.
  • Use only the recommended power supply (5V2A) to prevent damage and ensure optimal performance.
  • Keep the device away from strong magnetic fields.
  • Do not attempt to disassemble or repair the device yourself. Contact customer support if issues arise.

3. Package Contents

The contents of your package will vary depending on the model purchased:

Only TX or RX (Model R800 or R2020)

Package contents for a single TX or RX unit

Image: Package contents for a single Transmitter (TX) or Receiver (RX) unit.

  • Transmitter or Receiver x 1
  • Antenna x 1
  • User Manual x 1
  • 100cm USB C Cable x 1

R1000 (1 Transmitter + 1 Receiver)

Package contents for 1 Transmitter and 1 Receiver

Image: Package contents for the R1000 model.

  • Transmitter x 1
  • Receiver x 1
  • Antenna x 2
  • User Manual x 1
  • HDMI Adapter x 1
  • 100cm USB C Cable x 2

R1010 (1 Transmitter + 2 Receivers)

Package contents for 1 Transmitter and 2 Receivers

Image: Package contents for the R1010 model.

  • Transmitter x 1
  • Receiver x 2
  • Antenna x 3
  • User Manual x 1
  • HDMI Adapter x 2
  • 100cm USB C Cable x 3

R1030 (1 Transmitter + 3 Receivers)

Package contents for 1 Transmitter and 3 Receivers

Image: Package contents for the R1030 model.

  • Transmitter x 1
  • Receiver x 3
  • Antenna x 4
  • User Manual x 1
  • HDMI Adapter x 3
  • 100cm USB C Cable x 4

R1040 (1 Transmitter + 4 Receivers)

Package contents for 1 Transmitter and 4 Receivers

Image: Package contents for the R1040 model.

  • Transmitter x 1
  • Receiver x 4
  • Antenna x 5
  • User Manual x 1
  • HDMI Adapter x 4
  • 100cm USB C Cable x 5

4. Product Overview

The Lemorele Wireless HDMI Extender offers a robust solution for wireless video transmission. Key features include:

  • APP Monitoring: Real-time video monitoring via the TuTuPlay app on Android and iOS devices.
  • High Resolution: Supports 1080P@60Hz for clear and smooth video.
  • Extended Range: Up to 200 meters (656ft) transmission distance with 1 Transmitter to 1 Receiver configuration.
  • Multi-Receiver Support: One transmitter can connect to up to 4 receivers or 4 TuTuPlay apps simultaneously.
  • Low Latency: Less than 50ms latency, suitable for live applications.
  • Dual-band Wi-Fi: Utilizes 2.4G and 5G frequencies with adaptive frequency hopping for stable signal.
  • Plug and Play: Simple setup without complex configurations.
  • Wide Compatibility: Connects to various HDMI source devices (laptops, PCs, cameras, set-top boxes) and display devices (TVs, projectors, monitors, tablets, phones).
  • Durable Design: Features a titanium alloy housing.
Lemorele Wireless HDMI Extender units
Figure 4.1: Lemorele Wireless HDMI Extender units (Transmitter and Receiver).
Diagram showing wide compatibility with various devices
Figure 4.2: Wide compatibility with laptops, PCs, cameras, and other multimedia devices.
Image showing real-time monitoring with the TuTuPlay app
Figure 4.3: Real-time monitoring of video feed using the TuTuPlay app.
Diagram illustrating transmission range with multiple receivers
Figure 4.4: Transmission range varies based on the number of connected receivers/apps.

5. Setup Instructions

5.1 Initial Connection (Plug and Play)

  1. Connect the Transmitter (TX) to the HDMI output port of your source device (e.g., laptop, camera).
  2. Connect the Receiver (RX) to the HDMI input port of your display device (e.g., TV, projector).
  3. Ensure both TX and RX units are powered using the provided USB C cables and a 5V2A power adapter (not always included, but highly recommended).
  4. Wait for 5-10 seconds for the devices to establish a connection and begin projecting. No further configuration is typically required for a 1TX to 1RX setup.
Diagram showing plug and play setup
Figure 5.1: Simple plug-and-play connection for the Wireless HDMI Extender.

5.2 Pairing Process (for additional RX units or initial RX setup)

If you are using an RX unit purchased separately or need to re-pair a receiver, follow these steps:

Step-by-step pairing process for the device
Figure 5.2: Visual guide for the pairing process.
  1. Step 1: Connect the TX to a power supply and then to the camera or another source device.
  2. Step 2: Download the TuTuplay app from the app store or Google Play on your phone or tablet.
  3. Step 3: Following the pop-up prompt, open Wi-Fi settings, find the matching TUTU-Play network, and enter the password: 123 456.
  4. Step 4: Once connected successfully, you can start using the device.

For re-pairing a receiver (RX) to a transmitter (TX):

Instructions for re-pairing a receiver
Figure 5.3: Re-pairing steps for a receiver unit.
  1. Press and hold the receiver's function button for over 5 seconds. A prompt will appear on the interface. Release the button to enter pairing mode.
  2. Next, press and hold the transmitter's function button for over 5 seconds. The indicator light will flash rapidly to indicate that pairing has started. Wait for the transmitter's indicator light to remain steady, confirming a successful connection.

5.3 Power Supply

It is crucial to use a stable 5V2A power supply for both the transmitter and receiver units to ensure optimal performance. Insufficient power can lead to connection issues, lagging, sudden disconnections, or failure to display the network name (SSD) and password.

Diagram emphasizing the importance of 5V2A power supply
Figure 5.4: Ensure adequate power supply (5V2A) for stable operation.

6. Operating Instructions

6.1 Wireless Screen Casting

Once the transmitter and receiver(s) are connected and paired, the video from your source device will automatically be mirrored or extended to the connected display(s). The transmission range varies based on the number of receivers:

  • 1 Transmitter to 1 Receiver (1TX to 1RX): Up to 200 meters (656ft) transmission range.
  • 1 Transmitter to 2 Receivers (1TX to 2RX): Up to 130 meters (426ft) transmission range.
  • 1 Transmitter to 3 Receivers (1TX to 3RX): Up to 100 meters (328ft) transmission range.
  • 1 Transmitter to 4 Receivers (1TX to 4RX): Up to 100 meters (328ft) transmission range.
Diagram showing transmission ranges for different TX-RX configurations
Figure 6.1: Transmission ranges for various transmitter and receiver configurations.

6.2 APP Monitoring (TuTuPlay)

The TuTuPlay app allows you to monitor the video feed from the transmitter in real-time on your smartphone or tablet. The TX unit can support up to 4 TuTuPlay app connections.

  1. Download and install the TuTuPlay app from your device's app store.
  2. Connect your phone/tablet to the Wi-Fi network broadcast by the TX unit (TUTU-Play_XXXXXX, password: 123456).
  3. Open the TuTuPlay app to view the live video feed.
Diagram showing one transmitter supporting up to 4 TuTuPlay apps
Figure 6.2: One transmitter can stream to up to four TuTuPlay apps.
Video: Demonstrating the features and setup of the Lemorele Wireless HDMI Extender.

7. Maintenance

  • Keep the device clean by wiping it with a soft, dry cloth.
  • Avoid using harsh chemicals or abrasive cleaners.
  • Store the device in a cool, dry place when not in use.
  • Ensure proper ventilation around the units during operation to prevent overheating.

8. Troubleshooting

Problem Possible Cause Solution
No signal/No display Incorrect HDMI connection; Insufficient power supply; Devices not paired.
  • Check all HDMI connections are secure.
  • Ensure both TX and RX are powered by a 5V2A adapter.
  • Perform the pairing process (Section 5.2).
  • Verify the display device is set to the correct HDMI input.
Connection lags/Frequent disconnections Insufficient power supply; Interference; Out of range.
  • Use a 5V2A power adapter for stable power.
  • Reduce distance between TX and RX.
  • Minimize obstacles between units.
  • Avoid other strong wireless signals (e.g., Wi-Fi routers, microwaves).
TuTuPlay app not connecting or showing video Incorrect Wi-Fi connection; App issues; Insufficient power.
  • Ensure your phone/tablet is connected to the TX unit's Wi-Fi (TUTU-Play_XXXXXX, password: 123456).
  • Restart the TuTuPlay app.
  • Check TX power supply (5V2A).
Display interface does not show SSD and password Insufficient power supply.
  • This is a common symptom of insufficient power. Ensure a 5V2A power adapter is used.

9. User Tips

  • Power is Key: Many connection and performance issues stem from inadequate power. Always use a 5V2A power adapter for both the transmitter and receiver to ensure stable operation.
  • Optimal Placement: For best transmission range and stability, try to minimize physical obstructions (walls, furniture) between the transmitter and receiver units.
  • App for Flexibility: Utilize the TuTuPlay app for convenient real-time monitoring, especially in professional settings or when multiple viewing points are needed.

10. Specifications

Feature Detail
Brand Name Lemorele
Connector Type Wireless
Video Resolution 1080P@60Hz
Video Codec H.264
Latency Less than 50ms
Wireless Standard 2.4G/5G Dual-band Wi-Fi with Adaptive Frequency Hopping
Transmission Range (1TX to 1RX) Up to 200 meters (656ft)
Transmission Range (1TX to 2RX) Up to 130 meters (426ft)
Transmission Range (1TX to 3RX/4RX) Up to 100 meters (328ft)
APP Monitoring TuTuPlay (Android & iOS), supports up to 4 APP connections
Power Supply 5V2A (recommended)
Certifications CE, RoHS, FCC
Housing Material Titanium Alloy
Origin Mainland China
Package Dimensions 22cm (L) x 23cm (W) x 3cm (H)
Package Weight 0.6 kg

11. Warranty and Support

Lemorele products are designed for reliability and performance. For specific warranty details, please refer to the warranty card included in your package or contact Lemorele customer support.

For technical assistance or troubleshooting not covered in this manual, please visit the official Lemorele website or contact their customer service team.

A detailed user manual in PDF format is also available for download: Lemorele Wireless HD Transmitter & Receiver Kit User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.