1. Introduction
Thank you for choosing the LEKATO WS-100 Wireless Guitar System. This system provides a high-quality, cable-free solution for musicians, offering crystal clear 2.4GHz wireless audio transmission with low latency. Designed for electric guitars, basses, keyboards, and other compatible musical instruments, the WS-100 ensures reliable performance and freedom of movement. This manual will guide you through the setup, operation, and maintenance of your new wireless system.
2. Package Contents
Please check the box to ensure all items are present:
- 1 x LEKATO WS-100 Transmitter
- 1 x LEKATO WS-100 Receiver
- 1 x Type-C Charging Cable
- 1 x Portable Charging Box
- 1 x User Manual (this document)

3. Key Features
- 2.4GHz Wireless Transmission: Ensures stable and high-fidelity audio with an effective outdoor range of up to 100 feet.
- Ultra-Low Latency: Experience virtually no delay with less than 6.7ms latency.
- High-Resolution Sound: 24-bit/48KHz lossless digital transmission sampling rate for pure sound quality.
- Portable Charging Box: Conveniently charges the transmitter and receiver twice, providing an additional 2 x 6 hours of battery life.
- Multi-Channel Support: Supports simultaneous broadcasts on 4 channels. One transmitter can also send a signal to multiple receivers.
- 190° Rotatable Plug: The adjustable plug design (3.5mm and 6.35mm) ensures compatibility with most electric guitars, basses, keyboards, and other instruments.
- Plug and Play: Automatic channel setup for easy and quick use.

4. Setup Guide
4.1 Initial Charging
- Before first use, fully charge both the transmitter and receiver.
- Place the transmitter and receiver into the portable charging box.
- Connect the Type-C charging cable to the charging box and a 5V 2A USB power adapter (not included).
- Alternatively, you can charge the individual units directly using the Type-C cable and a 5V 1A USB power adapter.
- The battery indicator lights on the units and charging box will show charging status.

4.2 Connecting to Instruments and Amplifiers
- Plug the transmitter into your instrument's output jack (e.g., electric guitar, bass, keyboard). The WS-100 supports both 3.5mm and 6.35mm plugs.
- Adjust the 190° rotatable plug to find the optimal position for your instrument.
- Plug the receiver into the input jack of your amplifier, mixer, or audio interface.


5. Operating Instructions
5.1 Power On/Off
Press and hold the power button on both the transmitter and receiver for a few seconds until the indicator lights illuminate.
5.2 Pairing and Channel Selection
- Once both units are powered on, they should automatically pair. The indicator lights will turn solid green when a connection is established.
- If pairing does not occur automatically or you wish to change channels, press and hold the button on both the transmitter and receiver simultaneously for 3 seconds. The units will cycle through the 4 available channels. Release the button when the desired channel is selected.
- The system supports up to 4 channels for simultaneous use, allowing multiple wireless systems to operate in the same area without interference.
- One transmitter can also broadcast to multiple receivers simultaneously.

5.3 Usage
Once paired, your instrument's signal will be wirelessly transmitted to your amplifier or audio device. Adjust the volume on your instrument and amplifier as usual. The system is designed for plug-and-play convenience.

6. Maintenance
6.1 Charging
The transmitter and receiver each provide approximately 6 hours of battery life per charge. The portable charging box can recharge both units twice, extending their usage time significantly. Always use the provided Type-C cable and a compatible USB power adapter (5V 2A for the charging box, 5V 1A for individual units).
6.2 Cleaning and Storage
- Wipe the units with a soft, dry cloth. Do not use liquid cleaners or solvents.
- Store the system in a cool, dry place away from direct sunlight and extreme temperatures.
- When not in use for extended periods, ensure the units are fully charged before storage and recharge them every few months to maintain battery health.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound or intermittent signal | Units not paired; low battery; interference; out of range; incorrect connection. | Ensure both units are powered on and paired (solid green light). Recharge units. Move closer to the receiver. Try a different channel (press and hold button for 3s). Check all cable connections. |
| High latency or signal dropouts | Interference from other 2.4GHz devices (Wi-Fi, other wireless systems); physical obstructions. | Change to a different channel. Reduce distance between transmitter and receiver. Avoid placing units near Wi-Fi routers or large metal objects. |
| Units not charging | Faulty cable/adapter; improper connection; charging box low on power. | Ensure Type-C cable is securely connected. Try a different USB power adapter. Charge the portable charging box itself. |
| Units won't power on | Battery completely drained. | Charge the units for at least 30 minutes before attempting to power on again. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | LEKATO |
| Model | WS-100 |
| Material | ABS Plastic |
| Wireless Frequency | 2.4GHz |
| Sampling Rate | 24bit/48KHz |
| Latency | <6.7ms |
| Transmission Distance | 30 meters (100 feet) effective outdoor, 15 meters through wall |
| Dynamic Range | >105dB |
| Frequency Response | 20-20KHz, +1dB/-3dB |
| Number of Channels | 4 |
| Plug Type | 3.5mm and 6.35mm (190° rotatable) |
| Battery Life (per unit) | Approx. 6 hours |
| Charging Box Capacity | Provides 2 full charges for both units |
| Charging Input (Box) | 5V 2A |
| Charging Input (Device) | 5V 1A |
| Weight (Package) | 300g (approx.) |
9. User Tips
- For optimal performance, ensure a clear line of sight between the transmitter and receiver, especially in crowded environments.
- Always fully charge your units before a performance or extended practice session to avoid unexpected power loss.
- Experiment with different channels if you experience any interference, particularly in areas with many Wi-Fi networks.
- The 190° rotatable plug is designed for flexibility; ensure it is securely seated in your instrument's jack to prevent signal issues.
10. Warranty and Support
LEKATO products are designed for reliability and performance. For any technical support or warranty inquiries, please refer to the contact information provided by your retailer or visit the official LEKATO website. Keep your purchase receipt as proof of purchase for warranty claims.