1. Introduction
The LEKATO MS-02 is a 2.4GHz wireless in-ear monitor (IEM) system designed to provide musicians, performers, and audio engineers with a reliable and high-quality audio monitoring solution. Featuring ultra-low latency in both mono and stereo modes, automatic pairing, and a compact design, the MS-02 is ideal for studio recordings, band rehearsals, and live performances. This manual will guide you through the setup, operation, and maintenance of your MS-02 system.
2. Package Contents
Please check the package carefully to ensure all items are present:
- 1 x Wireless Transmitter
- 1 x Wireless Receiver
- 2 x Type-C Charging Cables
- 1 x 3.5mm to 6.35mm Adapter
- 2 x 3.5mm Audio Cables
- 1 x User Manual

3. Product Overview
3.1 Transmitter and Receiver Units
The LEKATO MS-02 system consists of a transmitter and a receiver unit. Both units are compact and feature intuitive controls.

3.2 Transmitter Controls and Connectivity
The transmitter unit sends the audio signal wirelessly. It features controls for power, mode selection, and mute, along with a 3.5mm input jack for connecting to audio sources.

3.3 Receiver Controls and Connectivity
The receiver unit receives the wireless audio signal and outputs it to your headphones or other monitoring devices. It includes controls for power, mode selection, pairing, and volume adjustment.

4. Setup Guide
4.1 Charging the Units
Before first use, fully charge both the transmitter and receiver units using the provided Type-C charging cables. The LED indicators will show the charging status.

4.2 Initial Pairing
The units are designed for automatic pairing. Follow these steps for initial setup or re-pairing:
- Turn on the transmitter unit.
- Turn on the receiver unit.
- Press and hold down the two pairing buttons (labeled 'PAIR') on both the transmitter and receiver simultaneously. The lights will start blinking, indicating pairing mode.
- Wait for the lights on both the transmitter and receiver to become solid, indicating successful pairing.
- Ensure both units are set to the same channel (Stereo or Mono) for proper operation.
4.3 Connecting to an Audio Source (Transmitter)
Connect the transmitter to your audio source (e.g., mixer, computer, smartphone) using one of the supplied 3.5mm audio cables. If your audio source has a 6.35mm output, use the 3.5mm to 6.35mm adapter.

4.4 Connecting Monitoring Devices (Receiver)
Plug your in-ear monitors or headphones into the 3.5mm jack on the receiver unit.
5. Operating Instructions
5.1 Power On/Off
Long press the 'STEREO' or 'MONO' button on each unit to power it on or off.
5.2 Mono/Stereo Mode Switching
Long press the 'STEREO' or 'MONO' button on both the receiver and transmitter to switch between mono and stereo input modes. Both units must be on the same channel for proper pairing and operation.

5.3 Volume Adjustment
The receiver is equipped with 5-level volume adjustment buttons (+ and -). Use these buttons to quickly adjust your desired monitoring sound level.
5.4 One-Key Mute Function
The transmitter features a one-key mute function. Press the mute button to immediately stop the audio transmission. This is useful for critical moments during performances or rehearsals.

5.5 One-to-Many Connection
The MS-02 system supports a single transmitter sending signals to multiple receivers simultaneously (up to 4 pairs of devices). To add more receivers, follow the pairing steps (Section 4.2) for each additional receiver with the same transmitter.

6. Specifications
Key technical specifications for the LEKATO MS-02 Wireless In-Ear Monitor System:

| Feature | Specification |
|---|---|
| Brand | LEKATO |
| Model | MS-02 |
| Wireless Communication Technology | 2.4 GHz Radio Frequency |
| Headphones Jack | 3.5 mm Jack |
| Frequency Response | 20-20KHz |
| Sampling Rate | 48KHz/24bit |
| Mono Delay | <4.5ms |
| Stereo Delay | <10.8ms |
| Battery Life | 6-8 hours (continuous operation) |
| Effective Distance | 100 feet (open area) |
| Item Weight | 5.3 ounces |
| Dimensions (approx.) | Height: 11.60 cm (4.57"), Width: 7.40 cm (2.91"), Thickness: 3.70 cm (1.46") |
| Batteries Included | Yes |
7. Maintenance
- Cleaning: Use a soft, dry cloth to clean the units. Do not use liquid cleaners or solvents.
- Storage: Store the system in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the units frequently. Charge them regularly, even if not in use for extended periods.
- Avoid Moisture: Keep the units away from water and high humidity to prevent damage.
8. Troubleshooting
8.1 No Sound or Intermittent Audio
- Check Pairing: Ensure both the transmitter and receiver are properly paired and their indicator lights are solid. Re-pair if necessary (Section 4.2).
- Check Connections: Verify that all audio cables are securely connected to the audio source and the receiver.
- Volume Levels: Confirm that the volume on the receiver is adjusted appropriately and the audio source is sending a signal.
- Mono/Stereo Mode: Ensure both units are set to the same mode (Mono or Stereo).
- Distance/Obstacles: The effective range is 100 feet in an open area. Reduce distance between units and remove any major obstacles.
- Interference: The 2.4GHz band can be susceptible to interference from Wi-Fi routers, microwaves, and other 2.4GHz devices. Try to operate away from such sources.
8.2 Short Battery Life
- Full Charge: Ensure the units are fully charged before use.
- Battery Age: Rechargeable batteries naturally degrade over time. If battery life significantly decreases, it may be due to battery age.
8.3 Units Not Powering On
- Charge Battery: Connect the units to a power source using the Type-C cables and allow them to charge for at least 30 minutes before attempting to power on again.
- Check Cables: Ensure charging cables are not damaged and are properly connected.
9. User Tips
- Expand Your System: The LEKATO MS-02 supports one transmitter broadcasting to multiple receivers. If you need to monitor for more band members or performers, you can purchase additional MS-02 receiver units and pair them to your existing transmitter.
- Optimal Placement: For best wireless performance, try to keep the transmitter and receiver in line of sight and avoid placing them directly behind large metal objects or other wireless equipment.
- Headphone Quality: The overall sound quality of your monitoring experience will be significantly influenced by the quality of the in-ear monitors or headphones you use with the receiver.
10. Warranty and Support
For warranty information or technical support, please refer to the official LEKATO website or contact the seller directly. Keep your purchase receipt as proof of purchase.